Research

About Research

The Research and Development Cell (RDC) has been established at OP Jindal University (OPJU), Raigarh with the aim of nurturing a robust research culture across challenging domains such as Engineering, Technology, Science, Humanities, and Management, including multidisciplinary fields. RDC is a faculty-initiated initiative at OPJU, crafted to strengthen and elevate the visibility of scholarly research across the university ecosystem. Operated under the guidance of the University Research Committee, RDC focuses on promoting research advancement, leadership, and academic excellence throughout the university. At its core, RDC consists of OPJU’s faculty experts who are not only accomplished but also deeply committed to fostering a dynamic and impactful research environment at the university.

Vision

To create a sustainable research ecosystem by which one can innovate and exhibit best-in-class research among the institutions globally

Mission

  • Ensure training of faculty in cutting-edge technologies
  • Increase quality publications by creating an enriched research ambience in the university
  • Promote advancement, leadership, and excellence in the pursuit of all areas of research, university-wide
  • To be top in the National Institutional Research Framework (NIRF) and make OPJU globally visible
  • To promote an innovation mindset and encourage new technology developments
  • To enrich the research facilities in the university and be a platform to boost research in Central India
  • To align towards the goals of NEP 2020 and ensure best-in-class research

Objectives

  • Promote a culture of research and scholarship amongst the faculty
  • Become a central repository of all research-related activities
  • Vet and approve all research-related activities
  • Ensure quality research and innovation in the university by educating the faculty, staff, and students on a regular basis

Director of Research

Message from Director - Research & Development Cell

Dr. M. Kalyan Phani

Director - R&D Cell

O.P. Jindal University (OPJU) is committed to establishing itself as a leading hub for Research and Development (R&D) excellence. Our university actively fosters a vibrant research ecosystem at both the departmental and institutional levels, supported by state-of-the-art infrastructure and essential resources to drive impactful discoveries.

The R&D Cell at OPJU plays a crucial role in empowering faculty members, guiding early-career researchers, fostering industry collaborations, and identifying emerging research opportunities. Committed to advancing interdisciplinary and applied research, we strive to address real-world challenges across diverse domains of science, engineering, and management.

At OPJU, our research community thrives through collaborative and independent exploration at the frontiers of innovation. We warmly invite scholars, industry partners, and aspiring researchers to engage with our research ecosystem—whether online or by visiting our campus—to discover opportunities for learning, collaboration, and professional growth.

We look forward to your participation in shaping the future of research at OPJU.

Best Practices of RDC

  • Research promotion and policy framework
  • Establishment of in-house research facilities
  • Research Monitoring and Review
  • Research Collaborations (Interdisciplinary)
  • Recognition ceremonies

RDC Team

Roles and Responsibilities of the RDC

  • Create and report on all research activities on a periodic basis.
  • Make the research activities visible on the website and other appropriate forums.
  • Create and manage an annual faculty research budget and get it approved for each academic year.
  • The research committee will use its annual research fund to decide on merit which proposals to fund.
  • Put in place a process to approve and fund faculty participation in conferences.
  • Create and monitor an incentive scheme for promoting research publications / patents.
  • Create a process to encourage and reward faculty engaged in research grants.
  • Formulate the rules for qualifying for the approval of grants / awards and seek the approval of the Vice Chancellor.
  • Ensure the enrichment and monitoring of the research facilities in the university.

Code of Ethics

Code of Ethics to Detect Mal Practices and Plagiarism in Research

Ethics is an important element in academics related to research and teaching. Though the knowledge transfers and invention has the freedom over academic process, it needs to be regulated through ethical practices. The freedom to enquire in the pursuit of innovation of new things needs publication of data without censorship, but in the manner which is professionally appropriate. To achieve this, the Institution has stated and published code of ethical plagiarism and malpractice.

Objectives

  • To ensure quality research publications and Innovations.
  • To establish Institutional mechanism through training and education for responsible research.
  • To develop mechanism to suitable reprimand the culprits found violating code of ethics.

Plagiarism

It is well known that the plagiarism cannot be eradicated in total. However, the university takes appropriate measures to avoid plagiarism. University defines plagiarism in four types:

  • Direct Plagiarism - Word to word transcription of someone else’s work without giving credit.
  • Self Plagiarism - Word to word transcript of own work.
  • Mosaic Plagiarism - Which is spread over the whole works in blocks.
  • Accidental Plagiarism - that has happened unknowingly.

The university has following tools to avoid the plagiarism.

  • Software procured for detection of plagiarism (URKUND and Turnitin).
  • Instruction issued to faculty and staffs to avoid plagiarism.
  • While using the works of other researchers it must be quoted, enclosed in quotation marks, and cite the source.
  • Using ideas or information that is not common knowledge must cite the source.
  • Not to invent it, cite the source.
  • Unless concern researcher explicitly permits to paraphrase, don’t paraphrase.
  • When in doubt, cite the source.
  • Institute use plagiarism software so as to ensure that documents such as thesis, dissertation, term papers, reports, publications or any other such documents are free of plagiarism at the time of their submission.
  • Every student submitting a thesis, dissertation, technical papers or any other such documents to the supervisor/guide shall submit an undertaking indicating that the document has been prepared by him or her and that the document is his/her original work and free of any plagiarism.
  • Every faculty-researcher submitting a thesis, dissertation, technical papers or any other such documents to the Board of Anti-Plagiarism shall submit an undertaking indicating that the document has been prepared by him or her.
  • Plagiarism permissible limits are as follows:
    • B.Tech Thesis - < 25%
    • M.Tech Thesis - < 15%
    • PhD Thesis - < 15%
  • The undertaking shall include the fact that the document has been duly checked through a Plagiarism detection tool approved by the institution.
  • Each supervisor/guide shall submit a certificate indicating that the work done by the researcher under him/her is plagiarism free. The same has to be included in the thesis.
    Faculty/Staff/Students of the university identified for any kind of repeated violation of the Research ethics of the university will be indicted in discussion with Director- RDC. Final decision on the action will be taken by the Vice Chancellor – OPJU.

PhD Scholars

PhD Scholarships for Students are available pursuing research in different majors. A PhD program which involves many years in deep research provides much more than learning as it develops expertise and confidence both. Funding for PhD in the form of various PhD scholarships and PhD studentships is available for international and domestic students. Being a scholarship holder a PhD scholar can engage himself / herself undisturbed into the research work.

School of Engineering

ANJALI YADAV PhD-EEE Electrical
G SREENADH REDDY PhD-Meta Metallurgy
RAKHI PANKAJ KUMAR PhD-Meta Metallurgy
ASHISH MISHRA PhD-Mechanical Mechanical
RAKESH PATIDAR PhD-EEE Electrical
GAMINI BHOI PhD-CSE Computer Science

Department of Computer Scienceand Engineering

  • Himadri Bhushan Mahapatra

Department of Electrical & Electronics Engineering

  • Vaibhav Singh Gaharwar

Department of Electrical & Electronics Engineering

  • Shirish Panda

Department of Mechanical Engineering

  • Sardar Singh Rathi

Department of Metallurgical & Materials Engineering

  • Varun Kumar Kurapati

Department of Civil Engineering

  • Anand Kumar

Department of Mechanical Engineering

  • Ajay Anant Mahawadiwar

Department of Electrical & Electronics Engineering

  • Ajay Panday

Department of Civil Engineering

  • Tulika Gupta

Department of Electrical & Electronics Engineering

  • Pushpanjali Shadangi

Department of Mechanical Engineering

  • Pratik Vijaydhage

School of Management

TRIPTI MAJUMDAR
Ankit Singh
Sradhanjali Samal
Vaibhav Sharma
Yugal Kishor Pradhan
Ritesh Mishra
G.V.S. Rama Manohar

School of Science

PRACHI SATABDI NANDA PhD- Physics
DEBASMITA DAS PhD - Mathematics
Meenal Bais Department of English
Manas Ranjan Mishra Department of Mathematics
Shaili Rani Department of Physics
Sonal P Tattes Department of Chemistry
Upendra Verma Department of Physics

Consultancy Projects

Consultancy Projects
S. No Title of the Project Faculty In-Charge Organization/ Institution
1 Innovative Bus Bar Protection Technique Dr. Sandeep Biswal, Department of Electrical Engineering Jindal Power Ltd. (JPL), Tamnar
2 Preparation of a high-temperature non-sticky refractory-based coating material with a low wear rate for use in a rotary kiln to avoid accretion formation and to improve its refractory lining life Dr. S. Das and Dr. Trinath Talapaneni, Department of Metallurgical Engineering DRI, JSP, Raigarh
3 Optimisation of compositions and processing parameters for reducing crack susceptibility of micro alloyed steel. Dr. Rajesh Jha and Dr. S. Das, Department of Metallurgical Engineering SMS, JSPL, Raigarh
4 Utilization of Submerged Arc Furnace Slag Dr. Trinath Talapaneni and Dr. S. Das, Department of Metallurgical Engineering SAF, JSP, Raigarh
5 Value added utilization of Fly Ash for sustainable solution Dr. Sibnath Kayal, Dr. Trinath Talapaneni and Dr. S. Das, Department of Metallurgical Engineering Jindal Power Ltd. (JPL), Tamnar
6 Controlled in-line cooling of JSPL Rails - Inconsistency in hardness of Head Hardened Steel Dr. M. K. Phani and Dr. S. Das, Department of Metallurgical Engineering RUBM and TSD, JSP, Raigarh
7 Use of Multifocal Concurrent Solar Heating System/ Alternative Source of heating in Metal Melting/Treating Process Dr. Satish Kanhed, Prof. Akash Pandey, Dr. Umesh Vishwakarma and Dr. Siddharth S Chakrabarti, Department of Mechanical Engineering) Nalwa Steel & Power Ltd., Raigarh
8 Use of Multifocal Concurrent Solar/Microwave/Induction Heating System in Water Boiling Process for Steam Turbine Dr. Satish Kanhed, Prof. Akash Pandey, Dr. Umesh Vishwakarma and Dr. Siddharth S Chakrabarti, Department of Mechanical Engineering) Jindal Power Ltd. (JPL), Tamnar
9 Application of Water Sprinkler and Bent Chimnies for Air Pollution (Coal dust) Reduction Dr. Satish Kanhed, Prof. Akash Pandey and Dr. Umesh Vishwakarma, Department of Mechanical Engineering) Nalwa Steel & Power Ltd., Raigarh
10 Design and Development of drone to minimize boiler inspection time Dr. Mithilesh K. Sahu and Dr. Siddharth S ChakrabartiDr. Mithilesh K. Sahu and Dr. Siddharth S Chakrabarti, Department of Mechanical Engineering Jindal Power Ltd. (JPL), Tamnar
11 Design and Development of calibration system for hydraulic servomotor to control pitch angle blade of PA fan Dr. Mahesh Bhiwapurkar and, Prof. L. R. Bhandarkar, Department of Mechanical Engineering Jindal Power Ltd. (JPL), Tamnar
12 To improve the life of convener and reduction of wear in CHP belt convener Dr. Mahesh Bhiwapurkar and, Prof. L. R. Bhandarkar, Department of Mechanical Engineering Jindal Power Ltd. (JPL) Tamnar
13 Prediction and optimization technique for condenser vaccum in thermal Power plant Dr. Siddharth S Chakrabarti, Dr. Saroj Chandra, Prof. L. R. Bhandarkar and Prof. Akash Pandey, Dept. of Mechanical and Computer Science Engineering Jindal Power Ltd. (JPL), Tamnar
14 Use of microwave for drying of wet coal fines Department of Mechanical Engineering Nalwa Steel & Power Ltd., Raigarh
15 Productivity Improvement by Reducing the Section Change Time of the Rolling Mill at Nalwa Steel & Power Limited (NSPL), Raigarh. Dr. Mukesh S Desai and Dr. B. P. Panda, School of Engineering and Management JSP, Raigarh

Industry/ Consultancy Projects
S. No Title of the Project Organization/ Institution
1 Failure Analysis of Three Different Sample which are Side Cut (C section), Wave Hole (I-section) and Scaling and Chip Formation (TMT Bar) MSP Steel and Power Limited
2 Failure Analysis of Crack sample of Square Pipe
3 Utilization of Si-Mn Slag- Waste to Wealth Approach Jindal Steel and Power
4 Microstructure characterization of longitudinal cracks developed during continuous casting of round section using SEM , Clinker Powder I and II, Rusted plate sample
5 X-ray diffraction analysis of blast furnace slag and steel slag samples
6 Sieve analysis and X-Ray Diffraction analysis of slag samples
7 Clinker powder samples received from cement plant
8 Peeled off scale from the plate at the coiling bed (Long flaky Scale)
9 Crumbled scale from coils from cut-to-length uncoiled line at plate mill (Powdery Scale)
10 Utilization of Steel slag for cement making: Microstructurally characterized to study the formation of clinker phases
11 Microstructural characterization of surface scales in plates and studying its rusting characteristics
12 SEM analysis of Blister and Slag Accretion
13 SEM analysis and Blister samples and bend failed samples
14 (i) Microstructure characterization of inclusion content in wire rod sample
(ii) Wire rod SAE 9254
15 MSL Failed samples MSL (Jindal Pipes Limited)
16 High entropy alloy NIT Surathkal
17 SEM analysis of grey cast iron and stainless steel weld NIAMT Ranchi
18 SEM examination of defect in steel sample SEM examination of defect in steel sample
19 SEM examination of:
(i)Bamboo Composite
(ii)Metal oxide particles
(iii)Perovskite
GGU Bilaspur
20 SEM examination of Bamboo samples Arts and Science college, Raigarh
21 SEM examination of Friction Stir weld sample NIT Raipur
22 SEM examination of Al alloy VSSUT, Burla
23 SEM and XRD Examination of refractory and accretion samples, JSP Raigarh Jindal Steel and Power

Sponsored Projects

S. No Title of the Project Name of the Faculty and Role Funding Agency Fund Amount Status
1. Development of a prototype device for oxygen separation from air, a strategic technological solution to control the food spoilage Dr. Sibnath Kayal (PI) International Cooperation Bilateral Scheme (DST-India and MSTR - Sri Lanka) 30.32 Lakhs Completed
2. Tailoring the properties of 2D materials using WO3 and MoO3 nanostructures Dr. R. S. Singh (Co-PI) UGC-DAE CSR 14 Lakhs On-Going
3. Utilization of micro-fines generated in agglomeration process to enhance the plant productivity Dr. M. Kalyan Phani (Subject Matter Expert) UGC STRIDE Project, Kazi Nazrul University 3.5 Lakhs Completed
4. Filing Machine Tool Prof. Bhandarkar (PI) UBA, IIT Delhi 0.25 Lakhs Completed

Research Facility

Department of Computer Science & Engineering

The Department is actively involved in various research activities in emerging areas. The faculty, students, and researchers carry out research in core domains and inter-disciplinary areas related to computer science. The university has state-of-the-art research labs and adequate computing facilities to support these activities.

  • Intel Intelligence Systems Lab in association with Intel Inc and FICE, focused on IoT and Embedded Systems research.
  • MATLAB 2011 (30 users) with toolboxes: SIMULINK, Image Processing, DSP, Wavelet, Control Systems, Communication, SIMSCAT, TETCOS Networks.
  • IBM Rational SEED (30 users).
  • Research scholars are encouraged to use Free Open Source Software like NS2, LAMP, PROLOG, HADOOP for research and project work.
  • High-end servers for cloud storage and computing.
  • Access to IEEE, Springer, and other scholarly journals and books.

Department of Civil Engineering

The Department of Civil Engineering, O.P. Jindal University, is providing technical support/consultancy services to Jindal Steel & Power Limited (JSPL), Raigarh for its upcoming four-lane road project from Raigarh to Pathalgaon (110 kms). The department provides material testing support for soil, compressive strength determination, bitumen testing, and more as per JSPL requirements.


Department of Electrical & Electronics Engineering

The Department is equipped with state-of-the-art laboratories. Research facilities in the field of Power Electronics, Electric Drives, and Electrical Power Systems are available with simulation support via MATLAB and Mi-Power software.

Facilities
Department of Computer Science and Engineering

Power Electronics

Department of Computer Science and Engineering

Electric Drives

Department of Computer Science and Engineering

Transmission Line Simulator

Department of Computer Science and Engineering

Microprocessor & Microcontroller

Department of Computer Science and Engineering

MATLAB Software

Department of Computer Science and Engineering

Mi-Power Software


Department of Metallurgical and Materials Engineering

This department pursues high-quality research in materials processing and development. Research focuses include ancient iron making, structure-property correlations, metal matrix composites, advanced high strength steels, superalloys, powder metallurgy, and nanoscale physical properties.

Facilities
Department of Computer Science and Engineering

Metallography Laboratory

Department of Computer Science and Engineering

Materials Processing Laboratory

Department of Computer Science and Engineering

Materials Testing Laboratory

Department of Computer Science and Engineering

Met/Chemical Analysis Laboratory

Department of Computer Science and Engineering

Mineral Dressing Laboratory

Department of Computer Science and Engineering

Corrosion Research Laboratory

Department of Computer Science and Engineering

Fuels, Furnaces and Refractory Laboratory

Department of Computer Science and Engineering

Tribology and Surface Engineering Laboratory

Department of Computer Science and Engineering

Computer Laboratory

Department of Computer Science and Engineering

Composite Materials Laboratory

Department of Computer Science and Engineering

NDT Laboratory

Department of Computer Science and Engineering

Foundry Laboratory

Department of Computer Science and Engineering

Heat Treatment Laboratory

Department of Computer Science and Engineering

Joining of Materials

Department of Computer Science and Engineering

Materials Engineering Laboratory

Department of Computer Science and Engineering

Magnetic Materials Research Laboratory

Department of Computer Science and Engineering

Microscopy and SEM Laboratory


Department of Mechanical Engineering

The Department provides a strong research environment supported by industry linkages. Research is organized into three cross-cutting, interdisciplinary themes: Sustainable Engineering and Solar Energy Utilization, Simulation and Systems Integration, and Robotics and Automation.

Facilities
Department of Computer Science and Engineering

CAD/CAM Laboratory

Department of Computer Science and Engineering

Robotics Laboratory

Department of Computer Science and Engineering

Materials Testing Laboratory

Department of Computer Science and Engineering

Computational Fluid Dynamics Laboratory

Department of Computer Science and Engineering

Solar Energy Laboratory

Department of Computer Science and Engineering

Energy Conversion Laboratory

Department of Computer Science and Engineering

Mechanical Vibration Testing Laboratory

Department of Computer Science and Engineering

Central Workshop

Department of Computer Science and Engineering

Quality Control and Production Management Laboratory

Department of Computer Science and Engineering

Advanced Heat Transfer Laboratory

Department of Computer Science and Engineering

Refrigeration and Air Conditioning Laboratory

Department of Computer Science and Engineering

Machine Design Laboratory

Department of Computer Science and Engineering

Internal Combustion Engine Lab

Department of Computer Science and Engineering

Power Plant Engineering Laboratory

Major Research Publications

S. No. Main Author(Internal) Title of Paper with Journal Details
1 Dr. Swapansarit Kar End-Anchored Externally Bonded BFRP Composites for Shear Strengthening of RC T-Beams”. Iran J Sci Technol Trans Civ Eng (2025). DOI:https://doi.org/10.1007/s40996-025-01853-y
2 Dr. Mithilesh Kumar Sahu A comprehensive review on performance and stability of nanofluids in Plate Heat Exchanger,” Interfacial Phenomena and Heat Transfer (2025). DOI:10.1615/InterfacPhenomHeatTransfer.2025055764 March 2025
3 Dr. M. Kalyan Phani Optimizing Process Parameters for Head-Hardened Rail Steels: Development of a Heat Treatment Setup”, Trans Indian Natl. Acad. Eng. (2025). DOI: https://doi.org/10.1007/s41403-025-00520-y
4 Dr. Nidhi Khobragade A review on advancement in mechanical and structural properties of graphene reinforced aluminium matrix composites”, International Journal of Materials Research (2025). DOI: https://doi.org/10.1515/ijmr-2024-0041
5 Dr. Mithilesh Kumar Sahu Heat propagation phenomenon of compressed natural gas /air premixed laminar flame impinging on a flat surface", Case Studies in Thermal Engineering 64 (2024) 105571. DOI: https://doi.org/10.1016/j.csite.2024.105571
6 Dr. Vatsala Chaturvedi, Dr. Deepak Patel and Dr. Trinath Talapaneni Evaluating the Mechanical Properties of Silico–Manganese Slag-Blended Silica Sand Molds for Foundry Applications", Trans Indian Inst Met 78, 75 (2025). DOI: https://doi.org/10.1007/s12666-024-03544-0
7 Dr. Jitesh Singh Development and analysis of Fe-doped ZnO nanoparticle-infused sisal fiber reinforced hybrid polymer composites for high-performance sound absorption and thermal insulation applications, Industrial Crops and Products, Volume 222, Part 3, 2024, 119763. DOI: https://doi.org/10.1016/j.indcrop.2024.119763
8 Dr. Mahasakti Mahamaya Development and characterization of alkali activated controlled low strength material using mining waste, Construction and Building Materials, Volume 452, 22 (2024), 13892. DOI: https://doi.org/10.1016/j.conbuildmat.2024.138928
9 Dr. Anurag Sharma Sustainable mortar into paver block using agricultural waste ash and recycled glass: ANN-based prediction of mechanical properties. Asian J Civ Eng (2024). DOI: https://doi.org/10.1007/s42107-024-01241-3
10 Dr. M. Kalyan Phani Reuse of spilled-out metal powder from LMD in making hybrid mining tools”, Advanced Materials & Processes 182 (8), ASM International, 2024
11 Dr. Rajesh Jha Investigation of effect of post weld heat treatment on microhardness and microstructure of auto TIG welded stabilized SA213 TP347H weldments, Welding International, Vol. 38, Issue 5, pp. 366-382, Apr. 2024
12 Mr. Asim Kiran Dandapat Design of Intrusion Detection System Using GA and CNN for MQTT-Based IoT Networks, Springer Journal International Publisher, Apr. 2024
13 Dr. Mithilesh Sahu Implementation of lean manufacturing methods to improve rolling mill productivity, International Journal of Advanced Technology and Engineering Exploration, Vol. 11(111), ISSN: 2394-7454, pp. 243-256, March 2024
14 Dr. Mukesh Shamkant Desai Application of Modified Single Minute Exchange of Die for the Reduction of Ambulance Response Time, Industrial Engineering Journal, Vol. 53, Issue 2, No. 4, pp. 158-176, March 2024
15 Dr. M. Kalyan Phani Welding Processes in Advanced Manufacturing. Int J Conf Proc. 3(5), March 2024
16 Dr. Bhupesh Dewangan Assessment of respiratory disorders using MFCC and LPC applied to machine learning algorithms. Nonlinear Studies, 31(1), March 2024
17 Dr. Bhupesh Dewangan Continuous hand gesture segmentation and acknowledgement of hand gesture path for innovative effort interfaces. International Journal of Reconfigurable and Embedded Systems (IJRES), Vol. 13, No. 2, March 2024
18 Dr. Bhupesh Dewangan Comparative Analysis of ARIMA Time Series Model and Other Techniques for Cloud Workloads Performance Prediction. In International Conference on Computer & Communication Technologies (pp. 343-350). Singapore: Springer Nature Singapore, March 2024
19 Dr. Bhupesh Dewangan Reinforcement Learning Approach to Solve: PBL Markov Model. In International Conference on Computer & Communication Technologies (pp. 333-342). Singapore: Springer Nature Singapore, March 2024
20 Dr. Bhupesh Dewangan A Lightweight Encryption Method for Preserving E-Healthcare Data Privacy Using Dual Signature on Twisted Edwards Curves. In International Conference on Computer & Communication Technologies (pp. 69-82). Singapore: Springer Nature Singapore, March 2024
21 Dr. Mithilesh Sahu “A numerical study on effect of intra and inter spaced winding configuration on performance of oil forced transformer cooling system" Journal of Power and Energy., Jan 2024
22 Dr. S.S. Chakrabarti, Dr. Satish Kanhed “Enhancing Efficiency and Power Output of a Typical Hybrid Photovoltaic Thermal System.", Journal of Engineering Science and Technology Review. Jan 2024
23 Dr. Anurag Sharma “Seismic Assessment of Vertically Irregular RC Buildings Designed using DDBD and FBD Approaches”, 13th Structural Engineering Convention – An International Event (SEC-2023), organized by Visvesvaraya National Institute of Technology Nagpur, Maharashtra, India on 07th – 09th December 2023.
24 Dr. Siddharth S. Chakrabarti, Dr. Satish Kanhed “Enhancing Power Output through the Development of a Hybrid Photovoltaic Thermal System,” Journal of Engineering Science and Technology Review, Nov. 2023
25 Dr. Mukesh Shamkant Desai “Mathematical Modelling for The Cost of Quality: A Case of Steel Plant Activities,” Industrial Engineering Journal, Nov. 2023
26 Dr. Mukesh Shamkant Desai “The Compatibility Gap Between the Steps of Single Minute Exchange of Die and Activities of Ambulance Response Time,” Industrial Engineering Journal, Oct. 2023
27 Dr. Siddharth Chakrabarti “Heat Transfer Analysis in Sound-Enhanced Fluidized Beds Containing Geldart BC Binary Mixtures,” International Journal of Membrane Science and Technology, Oct. 2023
28 Dr. Mukesh Shamkant Desai “Modelling Of Reverse Logistic Approaches: A Proposed Framework,” Industrial Engineering Journal, Sep. 2023
29 Dr. Mukesh Shamkant Desai “Modified Single Minute Exchange of Die for Reduction of Ambulance Response Time,” Industrial Engineering Journal, Sep. 2023
30 Prof. Dharmender Singh Saini “Tribological Performance Evaluation Of Greases On Four Ball Tester With Nanoparticles Graphene Oxide,” ACS Omega, Aug. 2023
31 Dr. M.K. Bhiwapurkar “Development and Analysis of Rolling Contact Fatigue Squat Crack in Wheel/Rail-Weld System Using Finite Element Modelling,” European Chemical Bulletin, Aug. 2023
32 Prof. Jitesh Singh “Thermal stability and dynamic mechanical analysis of nano-biofillers blended hybrid composites reinforced by cellulosic Borassus flabellifer L. fiber,” International Journal of Polymer Analysis and Characterization, Aug. 2023
33 Dr. Mithilesh Sahu “Design and Development of Novel Solar Concentrating Spittoon to Control the Spread of COVID-19 Virus at Public Places,” EVERGREEN - Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy, Aug. 2023
34 Dr. Swapna Sarit Kar “Estimation of shear resistance offered by EB-FRP U-jackets: An approach based on fuzzy-inference system,” Volume 32, Number 1, July 2023, pages 027-44
35 Dr. R.D. Patidar, Dr. Sandeep Biswal “A Robust Single Ended Disturbance Detection Scheme For Superconducting Fault Current Limiter Integrated UPFC Compensated Line,” Electric Power System Research, Elsevier, July 2023
36 Neeraj Kumar “Unfolding the hydrogen gas sensing mechanism across 2D Pnictogen/graphene heterostructure sensors,” Sensors and Actuators B: Chemical, 399 (2024) 134807
37 Dr. Saroj Kumar “Trajectory exploration of K-III robot employing modified wind driven algorithm,” AIP CP, Sep. 2023
38 Dr. Saroj Kumar “Design and Development of a nano drone - A real-time UAV,” Materials Today: Proceedings, Sep. 2023
39 Prasenjit Biswas, Deepak Patel “Effect of Low Degree Electromagnetic Field on Solidification Mechanism and Mechanical Properties of Twin Roll Cast Al 7075 Alloy,” JOM (2023). DOI: https://doi.org/10.1007/s11837-023-06173-y
40 Dr. Mukesh Shamkant Desai “The Compatibility Gap Between the Steps of Single Minute Exchange of Die and Activities of Ambulance Response Time,” Industrial Engineering Journal, Oct. 2023
41 Dr. Siddharth Chakrabarti “Heat Transfer Analysis in Sound-Enhanced Fluidized Beds Containing Geldart BC Binary Mixtures,” International Journal of Membrane Science and Technology, Oct. 2023
42 Neeraj Kumar “Unfolding the hydrogen gas sensing mechanism across 2D Pnictogen/graphene heterostructure sensors,” Sensors and Actuators B: Chemical, 399 (2024) 134807
43 Dr. Saroj Kumar “Trajectory exploration of K-III robot employing modified wind driven algorithm,” AIP CP, Sep. 2023
44 Dr. Saroj Kumar “Design and Development of a nano drone - A real-time UAV,” Materials Today: Proceedings, Sep. 2023
45 Dr. Mithilesh Sahu “Study of utilization of power plant fly ash in cement making process and reduction of power consumption,” AIP CP, Sep. 2023
46 Dr. Mithilesh Sahu “A review on performance of the thermal power plant for optimized design of surface condenser,” AIP CP, Sep. 2023
47 Dr. Mithilesh Sahu, Dr. Siddharth Chakrabarti “Experimental investigation of blower speed and number of nozzle’s effect on cooling tower performance,” AIP CP, Sep. 2023
48 Dr. Abhilasha Chaudhuri “An Effective Feature Selection Technique for detecting Parkinson’s Disease using Binary Whale Optimization Algorithm,” 2023 IEEE World Conference on Applied Intelligence and Computing (AIC 2023), July 2023
49 Dr. Rakesh Nayak “Estimation of Power Consumption Prediction of Electricity Using Machine Learning,” July 2023
50 Dr. Bhupesh Kumar Dewangan “ML-based Anomalies Detection in Wireless Network Link Layer of the Internet of Things (IoT),” IEEE, June 2023
51 Dr. Siddharth Chakrabarti “Review of Composite Desiccants and Their Properties for Rotary Dehumidifiers,” European Chemical Bulletin, June 2023
52 Mr. Neeraj Kumar Verma “Impact of cyano and fluorine group functionalization on the optoelectronic and photovoltaic properties of donor-acceptor–π–acceptor benzothiadiazole derived small molecules: A DFT and TD-DFT study,” Korean Journal of Materials Research, June 2023
53 Mr. Dharmendra Singh Saini “Optimization of predicted wear and friction for electroless Ni-P by RSM, Fuzzy logic and ANFIS using TOPSIS,” Transactions of the Indian Institute of Metals-TIIM (Springer publications), May 2023
54 Dr. Deepak Patel “Wear behavior investigation of Al-B4C functionally graded composite through Taguchi's design of experiment,” Journal of Engineering Research, May 2023
55 Dr. Arti Vaish “On some classical and quantum mechanical aspects of light in an optical fibre,” Springer, May 2023
56 Mr. U. S. Pandey, Dr. Gulshan Soni, Dr. S. K. Chandra “The Impact of Alteration of Superframe Duration on the Consumption of Energy,” IEEE, April 2023
57 Mr. Uma Shankar Pandey “Dynamic duty cycle based MAC protocols - A Comprehensive Survey,” IEEE, May 2023
58 Dr. Gulshan Soni “A Fuzzy logic based objective function to improve reliability of RPL routing protocol in LLNs,” IEEE, May 2023
59 Ms. Princy Diwan “A Bibliometric Analysis of Network Security on Blockchain,” IEEE, May 2023
60 Mr. Pradeep Kumar Shriwas “An Approach to Evaluate Load Balancing and Crucial Data Analysis Through Hadoop Framework,” IEEE, May 2023
61 Ms. Princy Diwan “Application of Brain-Inspired Computing for Daily Assistance,” IGI Global, May 2023
62 Dr. Bhupesh Kumar Dewangan “Ensuring data protection using machine learning integrating with blockchain technology,” Springer, May 2023
63 Dr. Bhupesh Kumar Dewangan “Hybrid nature-inspired based oversampling and feature selection approach for imbalance data streams classification,” IEEE, May 2023
64 Dr. Bhupesh Kumar Dewangan “A bibliometric analysis of network security on blockchain,” IEEE, May 2023
65 Dr. Bhupesh Kumar Dewangan “Machine learning security algorithms and framework for IoT system,” IEEE, May 2023
66 Dr. Bhupesh Kumar Dewangan “Arima time series model vs. k-means clustering for cloud workloads performance,” IEEE, May 2023
67 Dr. Bhupesh Kumar Dewangan “A comparison of feature selection approaches for liver disease data,” IEEE, May 2023
68 Dr. Bhupesh Kumar Dewangan “Evolution of low-power blockchain technology by using iterative sharding for IoT environment,” IEEE, May 2023
69 Dr. Bhupesh Kumar Dewangan “Hybrid deep learning based semi-supervised model for medical imaging,” IEEE, May 2023
70 Dr. Bhupesh Kumar Dewangan “An approach to evaluate load balancing and crucial data analysis through Hadoop framework,” IEEE, May 2023
71 Dr. Rakesh Nayak “A Novel Feature Based Review score to Classify True Reviewer,” IEEE OTCON 2.0, May 2023
72 Dr. Rakesh Nayak “Generic View of Sentiment Analysis Using Machine Learning Models,” IEEE OTCON 2.0, May 2023
73 Dr. Rakesh Nayak “A Novel Design and Development model for people counting in a Closed Environment with Machine Learning Approach,” IEEE OTCON 2.0, May 2023
74 Dr. Rakesh Nayak “Hybrid Recommendation System with Enhanced Generalized Sequential Pattern Algorithm for E-Learning System,” IEEE OTCON 2.0, May 2023
75 Dr. Arti Vaish “On some classical and quantum mechanical aspects of light in an optical fiber,” Springer, May 2023
76 Dr. Arti Vaish “Classical and quantum mechanical aspects of light in an optical fiber,” Springer, May 2023
77 Mr. Asimkiran Dandapat “Machine Learning and Deep Learning based Stock Market Prediction considering Covid-19 as a Feature,” IEEE, May 2023
78 Dr. Abhilasha Chaudhuri “A Decision-making Framework Model for Replacement of Track Switch-point Changing Box using a Multiple Attribute Decision Making Method,” IEEE, May 2023
79 Dr. Gulshan Soni “Role of Artificial Intelligence and Internet of Things (IoT) in the automobile industry: Research Gaps,” IEEE, May 2023
80 Dr. Gulshan Soni “A Fuzzy logic based objective function to improve reliability of RPL routing protocol in LLNs,” IEEE, May 2023
81 Dr. Gulshan Soni “Dynamic duty cycle based MAC protocols - A Comprehensive Survey,” IEEE, May 2023
82 Dr. Gulshan Soni “Blockchain Enabled Internet of Things: Current Scenario and Open Challenges for Future,” Springer, Cham, May 2023
83 Dr. Gulshan Soni “Toward automated machine learning for genomics: evaluation and comparison of state-of-the-art AutoML approach,” Academic Press (Science Direct), May 2023
84 Mr. Pradeep Kumar Shriwas “An Approach to Evaluate Load Balancing & Crucial Data Analysis through Hadoop Framework,” IEEE, May 2023
85 Mr. Pradeep Kumar Shriwas “A Bibliometric Analysis of Network Security on Blockchain,” IEEE, May 2023
86 Dr. Saroj Kumar “Better Decision-Making Strategy with Target Seeking Approach of Humanoids using Hybridized SOARANN-Fuzzy Technique,” Journal of Computational Science (Elsevier), April 2023
87 Mr. Jitesh Kumar Singh “Study on the physical, mechanical, and thermal behaviour of RHN blend epoxy hybrid composites reinforced by Borassus flabellifer L. fibers,” Cellulose (Springer), April 2023
88 Mithilesh Sahu “Thermo-dynamic sensitivity analysis of SOFC integrated with blade cooled gas turbine hybrid cycle,” Journal of Thermal Engineering (Yıldız Technical University Press, İstanbul, Turkey), Feb. 2023
89 Dr. Saroj Kumar “Multi-target trajectory planning and control technique for autonomous navigation of multiple robots,” ISA Transactions (Elsevier), Mar. 2023
90 Mithilesh Sahu “Comparative studies on performance of plain, perforated, threaded, and threaded–perforated pin fin: A numerical approach,” Heat Transfer Journal (Willey Publication), Feb. 2023
91 Dr. Siddharth Chakrabarti “Development of the Empirical model and Optimization of parameters for prediction of Condenser Vacuum pressure in Thermal Power Plant,” IEEE Explore, Mar. 2023
92 Mithilesh Sahu “Comparison of the effect of CeO2 and CuO2 nanoparticles on performance and emission of a diesel engine fueled with Neochloris oleoabundans algae biodiesel,” Materials Today: Proceedings, Feb. 2023
93 Anurag Vijayawargiy & Mahesh Bhiwapurkar “Effect of Lifting Weight, Height and Asymmetry on Biomechanical Loading during Manual Lifting,” International Journal of Occupational Safety and Health, Feb. 2023
94 Prasenjit Biswas “Investigation of Effect of the Rheological Parameters on the Flow Behavior of ADC12 Al Alloy in Rheo-Pressure Die-Casting,” International Journal of Metalcasting, Jan. 2023
95 Prasenjit Biswas “Simulation and experimental investigation of centrifugal-cast functionally graded aluminum-B4C composite,” Materials and Manufacturing Processes, Feb. 2023
96 Prasenjit Biswas and Deepak Patel “Concept development, design, and validation of a novel continuous casting equipment,” World Journal of Engineering, Mar. 2023
97 Prasenjit Biswas and Deepak Patel “Production and characterization of Al-Cu Binary Alloy produced by using Novel Continuous Casting Process,” International Journal of Material Research, Mar. 2023
98 Deepak Patel and Prasenjit Biswas “Synthesis of Al-Sn Alloys by Direct Chill Casting under the effect of Mechanical stirring: An Experimental and Simulation Optimization Study,” International Journal of Materials Research, Mar. 2023
99 Nandala Acharjee “A review of various ceramic pigment preparation and characterization methodologies for applications,” Journal of Australian Ceramic Society, Mar. 2023
100 Neeraj Kumar Verma “Microstructural heterogeneity and anisotropy control of additive manufactured Ti-6Al-4V alloy for aircraft components,” Journal of The Minerals, Metals & Materials Society, Mar. 2023
101 Sandeep Biswal “LSF and Golden Jackal Optimization Algorithm based Optimal Placement and Sizing of Capacitors in Distribution System,” IEEE Xplorer, Feb. 2023
102 Sandeep Biswal “Optimal Allocation of DG in Radial Distribution Network for Power Loss Minimization based on LSF and GJO Algorithm,” IEEE Xplorer, Feb. 2023
103 Prasanta Kumar Jena “A High Gain Z-Source Converter with Reduced Device Count for Distributed PV System,” IEEE Xplorer, Feb. 2023
104 Ankireddy Narendra “Isolated Bidirectional Dual Active Bridge (DAB) Converter for Photovoltaic System: An overview,” CRC Press, Feb. 2023
105 G. Madhusudan Rao “Renewable Energy Sources,” IIP Publishers, Mar. 2023
106 R. S. Singh “CO2 Capture by Metal-Decorated Silicon Carbide Nanotubes,” Silicon, Mar. 2023
107 Bhupesh Kumar Dewangan “An Efficient Trajectory Representative Generation Moving Web-Based Data Prediction Using Different Clustering Algorithms,” IGI Global, Jan. 2023
108 Bhupesh Kumar Dewangan “Intruders Detection in VANETs data stream Using Federated Learning for Smart City Environment,” MDPI, Feb. 2023
109 Gulshan Soni “Role of Artificial Intelligence and Internet of Things (IoT) in the automobile industry,” Scopus Indexed, Feb. 2023
110 Bhupesh Kumar Dewangan “Exploring Future Opportunities of Brain-Inspired Artificial Intelligence,” IGI Global, Mar. 2023
111 Bhupesh Kumar Dewangan “Recognition of Hand Motion Trajectory Gestures for Novel Input Interfaces,” IIETA, Jan. 2023
112 Bhupesh Kumar Dewangan and Princy Diwan “Application of Brain-Inspired Computing for Daily Assistance,” IGI Global, Mar. 2023
113 Siddharth Chakrabarti “Review on Nanoporous inorganic desiccant materials in the context of application in rotary dehumidifiers,” Materials Today: Proceedings (Article in Press), Jan. 2022
114 Siddharth Chakrabarti “Performance Analysis of Desiccant Material Prepared by Simple Mixing of Silica Gel and Calcium Chloride,” Recent Advances in Mechanical Infrastructure, Springer Publications, Jan. 2022
115 Siddharth Chakrabarti “Parameters influencing the performance of fluidized bed: A review on thermo-hydraulic properties,” Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 2021
116 Mahesh Bhiwapurkar “Numerical simulation and Parametric analysis of fatigue crack in UIC 60 rail thermite welded joint,” IOP Conference Series: Materials Science and Engineering (Vol. 1206, No. 1, p. 012027), 2021
117 Mahesh Bhiwapurkar “A numerical simulation of UIC 60 rail-welds fatigue and crack growth under wheel frictional contact and bending,” Advanced Engineering Forum, 2022
118 Mahesh Bhiwapurkar “Parametric features of an UIC60 rail at weld bottom crack in transverse direction under weld-wheel contact forces,” Materials Today: Proceedings (Elsevier), 2021
119 Mahesh Bhiwapurkar “UIC60 rail alumino thermite weld’s semi elliptical head crack and stress intensity factor using ANSYS,” Materials Today: Proceedings, 2021
120 Mahesh Bhiwapurkar “Analysing behaviour of the rail wheel assembly with Alumino thermite weldment with model analysis simulation in ANSYS,” IOP Science: Journal of Physics
121 Mahesh Bhiwapurkar “Estimation of fatigue life parameters of an alumina thermit weld on UIC 60 rail joint using LEFM,” IOP: JOP, 2021
122 Mahesh Bhiwapurkar “A 3-D numerical simulation of fatigue crack growth in an alumino thermite welded UIC60 rail joint under different loading conditions,” Materials Today: Proceedings, 2021
123 Mahesh Bhiwapurkar “A Fatigue Crack Path Analysis in Rail Weldment Under Mixed Mode Loading Condition: A Computational Simulation,” Lecture Notes in Electrical Engineering (LNEE, volume 897), 2021
124 Anurag Vijayawargiya Ergonomics Evaluation of Manual Lifting Task on Biomechanical Stress in Symmetric Posture, International Journal of Occupational Safety and Health
125 Mithilesh Sahu Experimental investigation of thermal potential at diesel engine exhaust and numerical simulation of heat recovery in heat exchangers, Materials Today: Proceedings (Article in Press)
126 Mithilesh Sahu Computational Analysis of a Heat Transfer Characteristic of a Wavy And Corrugated Channel, Materials Today: Proceedings (Article in Press)
127 Mithilesh Sahu Exergo-Economic Analysis and Optimization of Cooled CGAM Cycle: A Gas Turbine Based Co-generation Cycle, International Journal of Engine Research
128 Ajit Singh Industry Oriented Quality Management of Engineering Education: An Integrated QFD-TOPSIS Approach, International Journal of System Assurance Engineering and Management, 2021
129 Jitesh Singh Characterization of raw and alkali–treated cellulosic fibers extracted from Borassus flabellifer L., Biomass Conversion and Bioresource Refinery, 2022
130 Saroj Chandra CNN Based Architecture for Automatically Detecting Peoples without Face Mask, In 2021 Emerging Trends in Industry 4.0 (ETI 4.0) (pp. 1-6). IEEE
131 Saroj Chandra Neural Network Prediction of Slurry Erosion Wear of Ni-WC Coated Stainless Steel 420, Metals Journal
132 Lipismita Panigrahi Segmented Region based Feature Extraction for Image Classification, In 2021 Emerging Trends in Industry 4.0 (ETI 4.0) (pp. 1-9). IEEE
133 A. Bhansali Embedding Color Watermark by Adjusting DCT using RGB Gray Scale watermarking, In 2021 Emerging Trends in Industry 4.0 (ETI 4.0) (pp. 1-4). IEEE
134 A. Bhansali A Prototype of Doctor Recommendation System using Classification Algorithms, In 2021 Emerging Trends in Industry 4.0 (ETI 4.0) (pp. 1-4). IEEE
135 A. Bhansali Integrating University Computing Laboratories with AWS for Better Resource Utilization. In Expert Clouds and Applications (pp. 87-95). Springer, Singapore
136 A. Bhansali Quantum-resistant University Credentials Verification System on Blockchain, 2022 IEEE Nigeria 4th International Conference on Disruptive Technologies for Sustainable Development (NIGERCON)
137 Bhupesh Dewangan Multi-Criteria Decision-Making Methodology for Sustainable Creativity in Social Media, Journal of Computer Science Volume 17 No. 11, 2021, 1128-1137
138 Bhupesh Dewangan Analysis of Blockchain Security Applications in Electronic Health Records Standardization, Recent Advances in Computer Science and Communications (SCOPUS and EBSICO)
139 Bhupesh Dewangan Improving software performance by automatic test cases through genetic algorithm, International Journal of Computer Applications in Technology, 2022
140 Bhupesh Dewangan Multi-View Deep Convolution Neural Network for Automatic Target Recognition and Classification of Synthetic Aperture Radar Image, Journal of Advances in Information Technology, 13(5), Oct 2022
141 Mahendra Shriwas System Powered by Post-Quantum Cryptography (BBVSP-PQC), 2nd International Conference on Power, Control, and Computing Technologies (ICPC2T-2022), IEEE Xplore
142 Abhilasha Chaudhuri Binary Jaya Algorithm based on Dice Similarity for Cancer Classification using Microarray Dataset, 2022 IEEE World Conference on Applied Intelligence and Computing (AIC 2022), SCOPUS Indexed, IEEE Xplore
143 M. Kalyan Phani Microstructural and mechanical characterization of parallel layered WC-NiCr weld overlay on 080 M40 steel substrate prepared using additive manufacturing, Materials Today: Proceedings, 2022
144 M. Kalyan Phani Towards Sustainable Solid Wastes Management by Indian Integrated Steel Plants: A comprehensive review, Indian Journal of Environment Protection, 2022 (ISSN:0253–7141), 2022
145 S. Das An Innovative Process for Synthesizing Mg-Al alloy-Based Composites, Metallography, Microstructure, and Analysis (Springer)
146 Vatsala Chaturvedi An Overview on the Microstructure and Mechanical Properties of Vibrated Magnesium Alloy During Solidification, Smart Technologies for Energy, Environment and Sustainable Development, Springer Proceedings in Energy book series (SPE), ICSTEESD 2020, Published in 2022
147 Trinath Talapaneni Proposing a suitable slag composition by estimating the fusion behavior, viscosity and desulphurization ability for blast furnaces running with high alumina, Materials Today: Proceedings, 2022
148 Neeraj Verma Influence of Inhibitors on the Corrosion of Al and Al-composites in Chloride-containing Solutions, Korean Journal of Materials Research (Materials Society of Korea, Korea), 2022
149 Neeraj Verma Advanced metal and carbon nanostructures for medical, drug delivery and bio-imaging applications, Journal of Nanoscale, Aug. 2022
150 Neeraj Verma A novel reduction approach for fabrication of transparent conducting fluorine and tin doped indium oxide thin film with low sheet resistance, Journal of Ceramics International, Aug. 2022
151 Neeraj Verma Recent Trends in Noble Metal Nanoparticles for Colorimetric Chemical Sensing and Micro-Electronic Packaging Applications. Metals 2021, 11, 329.
152 Sibnath Kayal Investigation of Methane Adsorption onto Metal-Organic Frameworks under Subcritical Condition Employing Adsorption Isotherm Models, Bulletin of Materials Science, 2022
153 Sibnath Kayal Evaluation of defect induced surface heterogeneity in Metal-Organic Framework materials with alkali dopants employing adsorption isotherm modelling, Journal of the Indian Chemical Society, 99 (2022) 100493.
154 Sibnath Kayal Analysis of CH4 Adsorption Isotherms onto MIL-101 (Cr) Metal-Organic Framework and Its Derivatives with Alkali Ion Dopants, Protection of Metals and Physical Chemistry of Surfaces, 58 (2022) 478-485.
155 Sibnath Kayal Benign Synthesis of Metal-Organic Framework (MIL-101-Cr) and Evaluation of Carbon-dioxide Adsorption Behaviour Employing Adsorption Isotherm Models, Current Organic Synthesis, (2022)
156 Rajesh Jha AI-guided Optimization of Manufacturing Protocols for AHSS Coils, Materials and Manufacturing Processes, 2022
157 Rajesh Jha AHSS application in Industry 4.0: Determination of optimum processing parameters during coiling process through unsupervised Machine Learning approach, Materials Today Communications
158 Saroj Kumar Modified invasive weed optimization-based path exploration for mobile robot, International Journal of Intelligent Unmanned Systems (Emerald), Oct 2022
159 Saroj Kumar Path Planning and obstacle avoidance of multi-robotic system in static and dynamic environments, Institution of Mechanical Engineering Part B: Journal of Engineering Manufacture, Oct 2022
160 Ankireddy A Combinational Sequence Duty Ratio Control of SPV Fed Variable Speed Induction Motor Drive Using Field Oriented Control, Electric Power Components and Systems, Taylor and Francis, Oct 2022
161 Deepankar Panda Resonance Photoemission Spectroscopic Study of Thermally Evaporated NiTiO3 Thin Film, Journal of Electronic Material, Oct 2022
162 Anurag Vijayawargiya Effect of Lifting Weight, Height and Asymmetry on Biomechanical Loading during Manual Lifting, International Journal of Occupational Safety and Health, Nov 2022
163 G. M. Rao Design and Development of Remora Optimization Based Controller for Speed Management in Three-Phase Brushless DC Motor, Neuro-Quantology, Nov 2022
164 G. M. Rao Optimized Evaluation of Brushless Motor Drive System using Adaptive Neuro-Fuzzy, PSO & Inference of Genetic Algorithm, Journal of Northeastern University, Nov 2022
165 G. M. Rao Virtual Development of Maximum Torque per Ampere by ANFIS with PI-Based Induction Motor Drive, Springer book Series, Nov 2022
166 Neeraj Verma Influence of Different Aqueous Media on the Corrosion Behavior of B4C-Modified Lightweight Al-Mg-Si Matrix Composites, Journal of Materials, Nov 2022
167 Saroj Kr. Chandra “Sentiment Analysis for Depression Detection and Suicide Prevention Using Machine Learning Models”, Nov 2022
168 Asimkiran Dandapat GMHPHCI, “Analysis of Heart Diseases Prediction Using Machine Learning”, Nov 2022
169 Gulshan Soni IGI Global Publisher, “Toward automated machine learning for genomics: evaluation and comparison of state-of-the-art AutoML approaches”, Nov 2022
170 Umesh Vishwakarma Advances in Engineering Research and Application, “Wear Analysis and Microstructural Characterization of Al-MMC Manufactured by Stir Casting”, Dec 2022
171 Sandeep Biswal International Journal of Electrical Power & Energy Systems, “A reconstruction based adaptive fault detection scheme for distribution system containing AC microgrid”, Dec 2022
172 P. K. Jena IEEE Journal of Emerging and Selected Topics in Industrial Electronics, “An Optimal Scheme for Installation of PMUs and IEDs to Reinforce Electricity Market Immunity Against Data Attacks in Smart Grid”, Dec 2022
173 Bhawana Deshmukh International Journal of Electrical Power & Energy Systems, “A reconstruction based adaptive fault detection scheme for distribution system containing AC microgrid”, Dec 2022
174 Anurag Sharma International Conference - 12th Structural Engineering Convention, “Seismic Assessment of Steel-frame Buildings Mounted with Base-Isolated System”, Dec 2022
175 Gulshan Soni International Conference Paper, WICT 2022, “Blockchain Enabled Internet of Things: Current Scenario and Open Challenges for Future”, Dec 2022
176 Bhupesh Kumar Dewangan International Conference Paper, MIDAS-2022, “ARM-FT Autonomic Randomized Cloudlet Management through Fault-tolerance”, Dec 2022
177 Umashankar Pandey ICSSIT 2023, “The Impact of Alteration of Superframe Duration on the Consumption of Energy in the IEEE 802.15.4 MAC”, Dec 2022
178 Vinod Kumar Gongcheng Kexue Yu Jishu/Advanced Engineering Science, “A Smart Healthcare System Using Body Sensor Networks (BSN) And Internet Of Medical Things (IoMT)”, Nov 2022
179 Mukesh Desai International Journal of Engineering Research and Applications, “Application of Single Minute Exchange of Die for the Reduction of Loading Time of Auto-car in Railway Wagons”, July 2022
180 Saroj Chandra American Institute of Physics (AIP), ICASPCT,2022, “Industry 4.0 based Machine Learning Models for Anomalous Product Detection and Classification”, July 2022
181 Kavita Patel Journal of Electronics Information Technology Science and Management, “An estimation of Phytochemical Constituents in Chirayata (Andrographis paniculata)”, Aug 2022
182 Bhupesh Dewangan Archives of Acoustics, “Comparative analysis of classifiers for the assessment of Respiratory disorders using Speech parameters”, Sep 2022
183 Bhupesh Dewangan IEEE Conference, Turkey, “Preventive measurement and Prediction of Covid-19 in India through Business Intelligence”, Sep 2022
184 Bhupesh Dewangan International Conference on Innovations in Computer Science and Engineering, “Ensuring Data Protection using Machine Learning Integrating with Blockchain Technology”, Sep 2022
185 Makade, R. G., Chakrabarti, S., Jamil, B., & Paswan, M. K. Prediction of global solar radiation in India: analysing the influence of variable input parameter (VIP) on the model’s output performance. International Journal of Ambient Energy, 1-20, 2020
186 Vaseer, G. Multi-Attack Detection using Forensics and Neural Network based Prevention for Secure MANETs. In 2020 11th International Conference on Computing, Communication and Networking Technologies (ICCCNT) (pp. 1-6). IEEE, 2020
187 Bhandarkar, L. R., Behera, M., Mohanty, P. P., & Sarangi, S. K. Experimental investigation and multi-objective optimization of process parameters during machining of AISI 52100 using high performance coated tools. Measurement, 172,108842, 2021
188 Biswal, S., Swain, S. D., Patidar, R. D., Bhoi, A. K., & Malik, O. P. Integrated Wide-Area Backup Protection Algorithm During Stressed Power System Condition in Presence of Wind Farm. Arabian Journal for Science and Engineering, 1-14, 2021
189 Chaturvedi, V., & Talapaneni, T. Effect of Mechanical Vibration and Grain Refiner on Microstructure and Mechanical Properties of AZ91Mg Alloy during Solidification. Journal of Materials Engineering and Performance, 30(5), 3187-3202, 2021
190 Biswal, S., Tajdinian, M., Adly, A. R., Patidar, R. D., Bhoi, A. K., & Rathore, N. S. Kullback‐Leibler divergence based differential protection scheme for shunt compensated transmission line. IET Generation, Transmission & Distribution, 15(12), 1808-1819, 2021
191 Makade, R. G., Chakrabarti, S., & Jamil, B. Development of global solar radiation models: A comprehensive review and statistical analysis for Indian regions. Journal of Cleaner Production, 126208, 2021
192 Chakrabarti, S., Yadav, S., & Bose, P. A systematic approach in power plant performance improvement through exergy analysis - A case study. International Journal of Energy for a Clean Environment, 2021
193 Hussain, M. I., Hussain, M., Gupta, A., & Ahmad, G. N. Experimental Investigation and Comparative Study of Sintering of Microcrystalline Nickel Using Microwave and Conventional Method. Arabian Journal for Science and Engineering, 1-15, 2021
194 Bandhu, K. C., & Bhansali, A. Comparison of Transmission Control Protocol Variants for Two Way Transfer and Propagation Model with WiMAX Network Bandwidth Asymmetry. In 2020 5th IEEE International Conference on Recent Advances and Innovations in Engineering (ICRAIE) (pp. 1-5). IEEE, 2020
195 Kumar, N., Phani, M. K., Chamoli, P., Manoj, M. K., Sharma, A., Ahmed, W., ... & Kumar, S. Nanomaterials for advanced photovoltaic cells. Emerging Nanotechnologies for Renewable Energy, 239-258, 2021
196 Singh, J. K., Rout, A. K., & Kumari, K. A review on Borassus flabellifer lignocellulose fiber reinforced polymer composites. Carbohydrate Polymers, 117929, 2021
197 Saini, N., Masih, J., Bansali, A., & Rajsekaran, R. Global Public Sentiment About “Use Of Drones” To Fight Covid-19 Pandemic. Solid State Technology, 9415-9433, 2020
198 Bhandarkar, L. R., Goswami, N. K., Behara, M. K., Mohanty, P. P., & Sarangi, S. K. Investigation and modeling of process parameters during the machinability study of AISI 52100 using advanced coated and uncoated tools. In AIP Conference Proceedings (Vol. 2341, No. 1, p. 040021). AIP Publishing LLC 2021
199 Mahamaya, M., Das, S. K., Reddy, K. R., & Jain, S. Interaction of biopolymer with dispersive geomaterial and its characterization: An eco-friendly approach for erosion control. Journal of Cleaner Production, 127778, 2021
200 Bhansali, A., Masih, J. & Sharma, M. Chapter 7 Blockchain 3.0 for sustainable healthcare. In D. Khazanchi, A. Kumar Vyas, K. Kant Hiran & S. Padmanaban (Ed.), Blockchain 3.0 for Sustainable Development (pp. 101-122), 2021, Berlin, Boston: DeGruyter. https://doi.org/10.1515/9783110702507-007
201 Bandhu, K. C., & Bhansali, A. Integrating University Computing Laboratories with AWS for Better Resource Utilization. In Expert Clouds and Applications (pp. 87-95). Springer, Singapore, 2022
202 Sen, P. K., Bhiwapurkar, M., & Harsha, S. P. Fatigue Crack Initiation and Life Prediction of Rail Weldment Under the Effect of Vertical and Lateral Load Conditions in Indian Railways. In Recent Advances in Smart Manufacturing and Materials (pp. 393-402). Springer, Singapore, 2021
203 Sen, P. K., Bhiwapurkar, M., & Harsha, S. P. Analyzing behaviour of a rail wheel assembly with alumino thermite weldment with modal analysis simulations in ANSYS. In Journal of Physics: Conference Series (Vol. 2070, No. 1, p. 012239). IOP Publishing, 2021
204 Singh, A. K., & Rawani, A. M. Industry oriented quality management of engineering education: an integrated QFD-TOPSIS approach. International Journal of System Assurance Engineering and Management, 1-19, 2021
205 Sen, P. K., Bhiwapurkar, M., & Harsha, S. P. Estimation of fatigue life parameters of an Alumino Thermic weld on UIC60 rail joint using LEFM. Journal of Physics: Conference Series (Vol. 2115, No. 1, p. 012051). IOP Publishing, 2021
206 Gabhane, M. G., Chakrabarti, S. S., & Wankhede, U. S. Parameters influencing the performance of fluidized bed: A review on thermo-hydraulic properties. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 1-34, 2021
207 Sen, P. K., Bhiwapurkar, M., & Harsha, S. P. Numerical Simulation and Parametric Analysis of Fatigue Crack in UIC60 Rail Thermite Welded Joint. IOP Conference Series: Materials Science and Engineering (Vol. 1206, No. 1, p. 012027). IOP Publishing, 2021
208 Mundra, P., Arya, A., Gawre, S. K., Biswal, S., Lopes, F. V., & Malik, O. P. Taylor series based protection starting element for STATCOM compensated transmission line. Electric Power Systems Research, 204, 107700, 2022
209 Chandrakar, P., Kumar, A., Ali, R., & Patidar, R. D. A Secure ECG based Smart Authentication Scheme for IoT Devices. 2021 Emerging Trends in Industry 4.0 (ETI 4.0) (pp. 1-7). IEEE, May 2021
210 Khan, M. S., Ranjan, R., Sharma, S., & Srivastava, A. Gd and Nd Doped Perovskite–Potential Material for Sustainable Energy. 2021 Emerging Trends in Industry 4.0 (ETI 4.0) (pp. 1-4). IEEE, May 2021
211 Panigrahi, L., & Verma, K. Segmented Region based Feature Extraction for Image Classification. 2021 Emerging Trends in Industry 4.0 (ETI 4.0) (pp. 1-9). IEEE, May 2021
212 Chandra, S. K., & Bhansali, A. CNN Based Architecture for Automatically Detecting People without Face Mask. 2021 Emerging Trends in Industry 4.0 (ETI 4.0) (pp. 1-6). IEEE, May 2021
213 Gupta, N., & Bhansali, A. Embedding Color Watermark by Adjusting DCT using RGB Gray Scale Watermarking. 2021 Emerging Trends in Industry 4.0 (ETI 4.0) (pp. 1-4). IEEE, May 2021
214 Bhansali, A., & Nagwani, N. K. A Prototype of Doctor Recommendation System using Classification Algorithms. 2021 Emerging Trends in Industry 4.0 (ETI 4.0) (pp. 1-4). IEEE, May 2021
215 Biswal, S., Quadri, I. A., Singh, D., & Prasad, S. A Time-Frequency Algorithm for CT Saturation Detection in the Presence of Noise. In 2021 Emerging Trends in Industry 4.0 (ETI 4.0) (pp. 1-5). IEEE, May 2021
216 Singh, D. Improved Block Matching Motion Estimation Technique using Modified Particle Swarm Optimization in Video Coding. In 2021 Emerging Trends in Industry 4.0 (ETI 4.0) (pp. 1-6). IEEE, May 2021
217 Quadri, I. A., Aggarwal, V., Bhowmick, S., & Patidar, R. D. Optimal Allocation of Capacitor and SVC in Radial Distribution System to Reduce Power Loss and Operational Cost. In 2021 Emerging Trends in Industry 4.0 (ETI 4.0) (pp. 1-6). IEEE, May 2021
218 Deshmukh, B., Biswal, S., & Lal, D. K. Synchronous Generator Out-of-Step Protection Based on Savitzky-Golay Filtering Technique. In 2021 Emerging Trends in Industry 4.0 (ETI 4.0) (pp. 1-3). IEEE, May 2021
219 Panday, A., Patidar, R. D., & Biswal, S. Intrinsic time decomposition based differential protection with adaptive threshold for UPFC compensated transmission line. International Journal of Emerging Electric Power Systems, 2021
220 Shadangi, P., Swain, S. D., Ray, P. K., & Panda, G. Experimental verification of DSTATCOM for various non-linear load. International Journal of Emerging Electric Power Systems, 2021
221 Behede, B., Chakrabarti, S., Wankhede, U., & Thakare, H. Review on nanoporous inorganic desiccant materials in the context of application in rotary dehumidifiers. Materials Today: Proceedings, 2021
222 Sen, P. K., Bhiwapurkar, M., & Harsha, S. P. A 3-D numerical simulation of fatigue crack growth in an alumino thermite welded UIC60 rail joint under different loading conditions. Materials Today: Proceedings, 2021
223 Sen, P. K., Bhiwapurkar, M., & Harsha, S. P. UIC60 rail alumino thermite weld’s semi elliptical head crack and stress intensity factor using ANSYS. Materials Today: Proceedings, 2021
224 Makade, R. G., Chakrabarti, S., & Jamil, B. Real-time estimation and prediction of the mortality caused due to COVID-19 using particle swarm optimization and finding the most influential parameter. Infectious Disease Modelling, 5, 772-782, 2020
225 Makade, R. G., Chakrabarti, S., Jamil, B., & Paswan, M. K. Prediction of global solar radiation in India: analysing the influence of variable input parameter (VIP) on the model’s output performance. International Journal of Ambient Energy, 1-20, 2020
226 Vaseer, G. Multi-Attack Detection using Forensics and Neural Network based Prevention for Secure MANETs. In 2020 11th International Conference on Computing, Communication and Networking Technologies (ICCCNT) (pp. 1-6). IEEE, 2020
227 Bhandarkar, L. R., Behera, M., Mohanty, P. P., & Sarangi, S. K. Experimental investigation and multi-objective optimization of process parameters during machining of AISI 52100 using high performance coated tools. Measurement, 172, 108842, 2021
228 Biswal, S., Swain, S. D., Patidar, R. D., Bhoi, A. K., & Malik, O. P. Integrated Wide-Area Backup Protection Algorithm During Stressed Power System Condition in Presence of Wind Farm. Arabian Journal for Science and Engineering, 1-14, 2021
229 Chaturvedi, V., & Talapaneni, T. Effect of Mechanical Vibration and Grain Refiner on Microstructure and Mechanical Properties of AZ91Mg Alloy during Solidification. Journal of Materials Engineering and Performance, 30(5), 3187-3202, 2021
230 Biswal, S., Tajdinian, M., Adly, A. R., Patidar, R. D., Bhoi, A. K., & Rathore, N. S. Kullback‐Leibler divergence based differential protection scheme for shunt compensated transmission line. IET Generation, Transmission & Distribution, 15(12), 1808-1819, 2021
231 Makade, R. G., Chakrabarti, S., & Jamil, B. Development of global solar radiation models: A comprehensive review and statistical analysis for Indian regions. Journal of Cleaner Production, 126208, 2021
232 Chakrabarti, S., Yadav, S., & Bose, P. A systematic approach in power plant performance improvement through exergy analysis - A case study. International Journal of Energy for a Clean Environment, 2021
233 Hussain, M. I., Hussain, M., Gupta, A., & Ahmad, G. N. Experimental Investigation and Comparative Study of Sintering of Microcrystalline Nickel Using Microwave and Conventional Method. Arabian Journal for Science and Engineering, 1-15, 2021
234 Bandhu, K. C., & Bhansali, A. Comparison of Transmission Control Protocol Variants for Two Way Transfer and Propagation Model with WiMAX Network Bandwidth Asymmetry. In 2020 5th IEEE International Conference on Recent Advances and Innovations in Engineering (ICRAIE) (pp. 1-5). IEEE, Dec. 2020
235 Kumar, N., Phani, M. K., Chamoli, P., Manoj, M. K., Sharma, A., Ahmed, W. & Kumar, S. Nanomaterials for advanced photovoltaic cells. Emerging Nanotechnologies for Renewable Energy, 239-258, 2021
236 Singh, J. K., Rout, A. K., & Kumari, K. A review on Borassus flabellifer lignocellulose fiber reinforced polymer composites. Carbohydrate Polymers, 117929, 2021
237 Saini, N., Masih, J., Bansali, A., & Rajsekaran, R. Global Public Sentiment About “Use Of Drones” To Fight Covid-19 Pandemic. Solid State Technology, 9415-9433, 2020
238 Gautam, A., Komal, P., Singh, R. S., Gautam, P., Manjari, S. K. V., & Ningthoujam, R. S. Hard core proof of the polyvinyl alcohol as a reducer for the formation of gold nanoparticles. Journal of Molecular Liquids, 334, 116112, 2021
239 Kadam, A. R., Kohale, R. L., Mishra, G. C., & Dhoble, S. J. Eu (III)-Doped tri-calcium Ca₃(1−X−Z) MZ(PO₄)₂ AX: X host array: optical investigations of down-conversion red phosphor for boosting display intensity and high color purity. New Journal of Chemistry, 45(16), 7285-7307, 2021
240 Singh, R. S., Rasheed, A., Gautam, A., Singh, A. K., & Rai, V. Enhanced Optical and Electrical Properties of Graphene Oxide-Silver Nanoparticles Nanocomposite Film by Thermal Annealing in the Air. Russian Journal of Applied Chemistry, 94(3), 402-409, 2021
241 Bhandarkar, L. R., Goswami, N. K., Behara, M. K., Mohanty, P. P., & Sarangi, S. K. Investigation and modeling of process parameters during the machinability study of AISI 52100 using advanced coated and uncoated tools. In AIP Conference Proceedings (Vol. 2341, No. 1, p. 040021). AIP Publishing LLC, May 2021
242 Mahamaya, M., Das, S. K., Reddy, K. R., & Jain, S. Interaction of biopolymer with dispersive geomaterial and its characterization: An eco-friendly approach for erosion control. Journal of Cleaner Production, 127778, 2021
243 Bhandarkar, L. R., M. Behera, P. P. Mohanty, and S. K. Sarangi Experimental investigation and multi-objective optimization of process parameters during machining of AISI 52100 using high performance coated tools. Measurement, 172, 108842, 2021
244 Biswal, Sandeep, Sushree Diptimayee Swain, Ram Dayal Patidar, Akash Kumar Bhoi, and Om Parkash Malik Integrated Wide-Area Backup Protection Algorithm During Stressed Power System Condition in Presence of Wind Farm. Arabian Journal for Science and Engineering, 1-14
245 Makade, Rahul G., Siddharth Chakrabarti, and Basharat Jamil Development of Global Solar Radiation Models: A Comprehensive Review and Statistical Analysis for Indian Regions. Journal of Cleaner Production, 2021, 126208
246 Sandeep Biswal, Mohsen Tajdinian, Ahmed. R. Adly, Ram Dayal Patidar, Akash Kumar Bhoi, Natwar Singh Rathore Kullback-Leibler Divergence Based Differential Protection Scheme for Shunt Compensated Transmission Line. IET Generation, Transmission & Distribution, 2020, 1-12
247 Makade, Rahul, Chakrabarti, Siddharth, & Jamil, Basharat Development of Global Solar Radiation Models: A Comprehensive Review and Statistical Analysis for Indian Regions. Journal of Cleaner Production, 293, 2021, 10.1016/j.jclepro.2021.126208
248 Bandhu, K. C., & Bhansali, A. Comparison of Transmission Control Protocol Variants for Two Way Transfer and Propagation Model with WiMAX Network Bandwidth Asymmetry. In 2020 5th IEEE International Conference on Recent Advances and Innovations in Engineering (ICRAIE) (pp. 1-5). IEEE, Dec. 2020
249 Kumar, N., Phani, M. K., Chamoli, P., Manoj, M. K., Sharma, A., Ahmed, W. & Kumar, S. Nanomaterials for advanced photovoltaic cells. Emerging Nanotechnologies for Renewable Energy, 239-258, 2021
250 Sushree Diptimayee Swain, Ray and Pravat Kumar "Performance enhancement of shunt active power filter with the application of an adaptive controller." IET Generation, Transmission & Distribution, 14(20), pp. 4444-4451, 2020
251 Mahesh Bhiwapurkar and Prakash Sen "Rolling Contact Fatigue Behavior of Rail Weldments Under Various Load Conditions: In Indian Railways Aspect," International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 2020
252 Sahu, Pradip Kumar, Gunji Balamurali, and Bibhuti Bhusan Biswal "Robotic manipulator trajectory optimisation using an improved modified bat algorithm." International Journal of Mechatronics and Automation, 7(1), pp. 11-22, 2020
253 Chakrabarti, Sidharth Sudhansu, Akash Pandey, and Pratik Dhage "A systematic approach for a better thermal management of photovoltaic systems - A review." Journal of Computational & Applied Research in Mechanical Engineering (JCARME), 10(1), pp. 1-24, 2020
254 Siddharth Chakrabarti, Makade, Rahul G., Basharat Jamil, and C. N. Sakhale "Estimation of global solar radiation for the tropical wet climatic region of India: A theory of experimentation approach." Renewable Energy, 146, pp. 2044-2059, 2020
255 Kumar, Neeraj and M. K. Manoj "Influence of B4C on Dry Sliding Wear Behavior of B4C/Al–Mg–Si Composites Synthesized via Powder Metallurgy Route." Metals and Materials International, pp. 1-12, 2020
256 Siddharth Chakrabarti, Makade, Rahul G., and Basharat Jamil "Real-time estimation and prediction of the mortality caused due to COVID-19 using particle swarm optimization and finding the most influential parameter." Infectious Disease Modelling, 5, pp. 772-782, 2020
257 Siddharth Chakrabarti, Makade, Rahul G., Basharat Jamil, and Mani Kant Paswan "Prediction of Global Solar Radiation in India: Analyzing the Influence of Variable Input Parameter (VIP) on the Model’s Output Performance." International Journal of Ambient Energy, pp. 1-41, 2020
258 Vaseer, Gurveen "Multi-Attack Detection using Forensics and Neural Network based Prevention for Secure MANETs." In 2020 11th International Conference on Computing, Communication and Networking Technologies (ICCCNT), pp. 1-6. IEEE, 2020
259 Prasad EV, Sivateja C, Sahu SK "Effect of nanoalumina on fatigue characteristics of fiber metal laminates." Polymer Testing, 85:106441, 2020
260 Prasad EV, Sahu SK "Buckling of fiber metal laminated plates – numerical and experimental studies." Aircraft Engineering and Aerospace Technology, 2020
261 S. Biswal, M. Tajdinian, M. Allahbakhshi, O. P. Malik and D. Behi "Study of the Impact of Switching Transient Over-voltages on Ferro-Resonance of CCVT in Series & Shunt Compensated Power Systems." IEEE Transactions on Industrial Informatics, 16(8), pp. 5032-5041, Aug 2020
262 S. Biswal, S. Akter, N. S. Rathore, P. Das, and A. Y. Abdelaziz "Amplitude Based Directional Relaying Scheme For Transmission Line During Single Pole Tripping." Electric Power System Research, vol. 184, July 2020
263 S. Biswal, M. Biswal "Detection of current transformer saturation phenomenon for secured operation of smart power network." Electric Power System Research, vol. 175, pp. 362-371, 2019
264 Ashok Kumar Srivastava, Ashutosh Sharma, M.C. Oh, T.J. Kim & B. Ahn "Investigation of electrochemical corrosion behavior of additive manufactured Ti–6Al–4V alloy for medical implants in different electrolytes." Journal of Alloys and Compounds, 2020, 154620
265 Ashok Kumar Srivastava, Nand Patel, B. Ravi Kumar, Ashutosh Sharma, B. Ahn "Strength - Ductility trade off in dual phase steel tailored via controlled phase transformation." Journal of Materials Engineering and Performance, 2020
266 Ashok Kumar Srivastava, Ashutosh Sharma, Kwan Lee, Byungmin Ahn "Impact of Non-Reactive Ceria Nanoparticles on the Wettability and Reaction Kinetics Between Lead-Free Sn–58Bi and Cu Pad." 2019
267 P. S. Bokare, A. K. Maurya, S. Gokhle "Effect of Speeding Behaviour of Passenger Cars on Tailpipe Emissions." Transportation Research Procedia, Elsevier, 2018
268 M. K. Phani, C. Ma, V. Pfahl, Z. Wang, Y. Chen, J. Chu, A. Kumar, W. Arnold, and K. Samwer "Stick-to-Sliding Transition in Contact-Resonance Atomic Force Microscopy." Applied Physics Letters, 113, 083102(1-4), 2018
269 Siddharth S. Chakrabarti, P. K. Das and Indranil Ghosh "Thermal Behavior of Wet Porous and Solid fin – Experimental and Analytical Approach." International Journal of Mechanical Sciences, Elsevier, 2018
270 L. R. Bhandarkar, V. Singh "Thermodynamic analysis of gas turbine power plant based on energy and entropy analysis." International Journal of Recent Scientific Research, 9(7), pp. 27793-27796, July 2018
271 Jitesh Kr. Singh, A. K. Rout "An overview of Advanced Fiber Reinforced Polymer Composites and Its Application." International Journal of Mechanical and Production Engineering Research and Development, 8(5), pp. 311-318, Sept. 2018
272 Jitesh Kr Singh, A. K. Rout “Advances in Green Steel Making Technology-A Review”, American Journal of Materials Engineering and Technology, 6(1), pp. 8-13, July, 2018.
273 Jitesh Kr Singh, A. S. Bais “Electricity Generation by Airfoil Design Vertical Axis Wind turbine”, 8(6), pp. 34-42, July, 2018.
274 Ashok Kumar Srivastava, Koh-ichi Sugimoto, Tomohiko Hojo “An Overview of Case-Hardening TRIP-Aided Martensitic Steels”, MDPI Open Journal “Metals (ISSN 2075-4701)", 8(5), p. 355, 2018.
275 Ashok Kumar Srivastava, Byungmin Ahn, Ashutosh Sharma “Template-assisted fabrication of nanostructured tin (β-Sn) arrays for bulk microelectronic packaging devices”, MDPI Open Journal “Metals (ISSN 2075-4701)", 8(5), p. 347, 2018.
276 Ashok Kumar Srivastava, Surendra Kumar Dwiwedi, Koh-ichi Sugimoto, Manoj Chopkar “Microstructural and mechanical characterization of Chicken Eggshell-reinforced Al6061 Matrix Composites”, Open Journal of Metals (ISSN: 2164-2761), 2018.
277 Ashok Kumar Srivastava, Ashutosh Sharma “Advances in Joining and Welding Technologies for Automotive and Electronic Applications”, American Journal of Materials Engineering and Technology (ISSN: 2333-8903), 5(1), pp. 7-13, 2017.
278 Mahesh Bhiwapurkar, Huzur Saran, S.P. Harsha “Effects of posture and vibration magnitude on seat to head transmissibility during exposure to fore-and-aft vibration”, Journal of Low Frequency Noise, Vibration & Active Control (ISSN: 2048-4046), 2017.
279 R. K. Sangewar “Experimental Investigation on Heat Transfer Characteristics of different Metallic Fin Arrays”, Journal of IE(I), Springer Publisher, 98(5), pp. 234-243, 2017.
280 R. K. Sangewar “Performance Evaluation of an Arbitrary Profiled Vertical Fin in Non Newtonian Medium”, Journal of Thermal Engineering and Applications, 3(3), pp. 23-31, 2016.
281 R. K. Sangewar “Performance Evaluation of Solar Refrigeration System Using the Numerical Methods”, Journal of Refrigeration Air Conditioning Heating and Ventilation, 4(1), pp. 23-31, 2017.
282 R. K. Sangewar “Prediction of Temperature Distribution of Spine Fins with Arbitrary Profiles”, Journal of Enhanced Heat Transfer, Begell House USA, 15(4), pp. 351-359, 2014.
283 R. K. Sangewar “Enhancement of Thermal Efficiency Using Hemispherical Protrusions on Solar Air Heaters”, International Journal of Energy for a Clean Environment, Begell House USA, 15(1), pp. 19-33, 2014.
284 M. K. Bhiwapurkar, V.H. Saran, S.P. Harsha “Effect of whole body vibration exposures, direction and postures on writing performance of train passengers”, International Journal of Advances in Vehicle Engineering, 2(1), pp. 29-41, 2016.
285 M. K. Bhiwapurkar, V.H. Saran, S.P. Harsha “Interference in writing performance under whole-body vibration exposure together with subject posture”, International Journal of Vehicle Noise and Vibration, 12(2), pp. 182-198, 2016.
286 M. K. Bhiwapurkar, V.H. Saran, S.P. Harsha “Seat-to-head transmissibility responses of seated occupants exposed to lateral vibration”, International Journal of Vehicle Noise and Vibration, 12(1), 2016.
287 S. S. Chakrabarti, P. K. Das “Performance Investigation of Air Washer For Different Psychrometric Conditions”, Computational Thermal Sciences, 7(3), pp. 217-230, 2015.
288 S. S. Chakrabarti, L. R. Bhandarkar “A Novel approach to the handling and disposal of Fly Ash”, International Journal for Energy and Clean Environment, 7(3), pp. 225-240, 2014.
289 A. K. Srivastava, Koh-ichi Sugimoto “Microstructure and Mechanical Properties of a TRIP-aided Martensitic Steel”, Metallography, Microstructure and Analysis (ASM International), 4, pp. 344–354, 2016.
290 A. K. Srivastava, K. Das, S. K. Toor, Koh-ichi Sugimoto “Corrosion Behavior of TiC and (Ti,W)C-Reinforced Fe-17Mn and Fe-17Mn-3Al Austenitic Steel Matrix In Situ Composites”, Metallography, Microstructure and Analysis (ASM International), 4, pp. 371–380, 2015.
291 A. K. Srivastava, K. Das, S. K. Toor, Koh-ichi Sugimoto “Corrosion behaviour of TiC-reinforced Hadfield Manganese Austenitic Steel matrix in-situ composites”, Open Journal of Metals, 5, pp. 11-17, 2015.
292 A. K. Srivastava, S. K. Pal, P. Saha, K. Das “Experimental investigation of the effect of Working Parameters on Wire Offset in Wire Electrical Discharge Machining of Hadfield Manganese Steel”, Journal of Surface Engineered Materials and Advanced Technology, 3, pp. 295-302, 2014.
293 A. K. Srivastava, K. Das, P. Saha, D. Tarafdar, S. K. Pal and P. Saha “Multi-objective optimization in wire-electro-discharge machining of TiC reinforced composites through Neuro-Genetic technique,” Applied Soft Computing, 13, pp. 2065-2074, 2014.
294 M. K. Phani, V. Pfahl, M. Büchsenschütz-Göbeler, A. Kumar, W. Arnold and K. Samwer “Conduction Electrons as Dissipation Channel in Friction Experiments at the Metal-Insulator Transition of LSMO Measured by Contact-Resonance Atomic Force Microscopy,” Applied Physics Letters, 110(5), 053102, 2017.
295 M. K. Phani, A. Kumar and V. Shankar “Elasticity mapping of precipitates in nickel based alloys using atomic force acoustic microscopy,” Journal of Material Science, 51(18), pp. 1-14, 2016.
296 M. K. Phani, A. Kumar, W. Arnold and K. Samwer “Elastic stiffness and damping measurements in titanium alloys using atomic force acoustic microscopy,” Journal of Alloys and Compounds, 697, pp. 397–406, 2016.
297 M. K. Phani, A. Kumar, T. Jayakumar, W. Arnold and K. Samwer “Mapping of elasticity and damping in an α + β titanium alloy using atomic force acoustic microscopy,” Beilstein Journal of Nanotechnology, 6, pp. 767–776, 2015.
298 K. K. Mehta, U. Sinha, A. K. Shriwastava “Real Time Implementation for Monitoring Drowsiness Condition of a Train Driver Using Brain Wave Sensor,” International Journal of Computer Applications, 139(9), pp. 25-30, 2016.
299 K. K. Mehta, A. Sanjeevni, K. Verma “Multiple object clustering using FCM and K-means algorithms,” International Journal of Computational Vision and Robotics, 6(4), pp. 134-137, 2016.
300 K. K. Mehta, S. Neware “Finger Knuckle Feature Extraction using Radon like Features,” International Journal of Computational Science and Engineering, 5(2), pp. 134-137, 2014.
S. No. Main Author(Internal) Title of Paper with Journal Details
1 Dr. Debasis Mohanty “Fostering Green Finance through MSMEs for Sustainable India,” OPJU Business Review 4(1), 120-129. DOI: https://doi.org/10.63825/opjubr.2025.4.1.10
2 Dr. Saurabh Gupta “Navigating the path to ChatGPT adoption among Indian students: unveiling the integration of UTAUT3 and TTF model,” VINE Journal of Information and Knowledge Management Systems (2025). DOI: https://doi.org/10.1108/VJIKMS-02-2024-0052, April 2025.
3 Dr. Saurabh Gupta “From commuter to advocates: assessing satisfaction and advocacy towards urban mass transportation,” The TQM Journal (2025). DOI: https://doi.org/10.1108/TQM-08-2024-0309, April 2025.
4 Dr. Debasis Mohanty “An Empirical Study on the Impact of FII and DII on Volatility, Leverage and Long-Term Returns of the Indian Stock Index,” Asian Journal of Economics, Business and Accounting 25(4), 131-135 (2025). DOI: 10.9734/ajeba/2025/v25i41739, April 2025.
5 Dr. Debasis Mohanty “Unveiling the Aggregated effect of Entrepreneurial Orientation on Enterprise Performance,” Prabandhan: Indian Journal of Management, Vol. 18, Issue 2 (Scopus Elsevier).
6 Dr. Deepti Sharma “Fire detection and surveillance system with cloud-based alert to enhance safety in commercials and home,” TELKOMNIKA (Telecommunication Computing Electronics and Control), 23(1), 185-191 (2025).
7 Dr. Deepti Sharma “Spotlighting recruitments: is AI dominating human resource practices? Qualitative research using NVIVO,” Quality & Quantity, 1-20 (2025).
8 Vikash Kumar “Performing a bibliometric analysis to investigate the knowledge landscape of agricultural mechanisation: a comprehensive examination of performance and scientific mapping,” International Journal of Technological Learning, Innovation and Development, 16(1), 50-75 (2025).
9 Dr. Saurabh Gupta “Evaluating E-leadership Self-efficacy Through Social Media Efficacy and Participation,” Management and Labour Studies, June 2023.
10 Dr. Saurabh Gupta “Virtual communication adoption by educational leaders: moderating role of perceived risk and benefits,” International Journal of Information and Learning Technology, April 2023.
11 Sunil Kumar “Factors Affecting Adoption of M-Wallets: Moderating role of Financial Incentives,” Ramanujan International Journal of Business and Research, 6, 132-143.
12 Sunil Kumar “Reviews Posted And Ratings Given By Consumer Endorsers: Gaining Customer Value,” Ramanujan International Journal of Business and Research, 6, 144-155.
13 Sunil Kumar “Citizen Empowerment and Adoption of E-Governance Services: The Role of Online Citizen Skills, Awareness, and Engagement,” International Journal of Electronic Governance.
14 Sunil Kumar “Impact of Digitalization on Youth Consumer Dynamics: A Review of Literature Using R-software,” International Journal of Public Sector and Performance Management.
15 J. P. Rath “Knowledge Management implementation at Hindalco Industries Limited (Aditya Aluminium): A Case Study Approach,” The Journal of Archaeology of Egypt / Egyptology, 2022.
16 Saket Jeswani “How Employees Raise Voice? A Model of Employee Voice Regulation,” SCMS Journal of Indian Management, 2022.
17 Dr. Saurabh Gupta “Tourist participation, well-being and satisfaction: the mediating roles of service experience and tourist empowerment,” Journal of Current Issues in Tourism (ABDC-A, Scopus, Q1, WoS), 2022.
18 Adil Khan “Teachers’ intention to continue the use of online teaching tools post Covid-19,” Cogent Education, 8(1), 2002130, 2021.
19 Adil Khan “Does Social Legitimacy Matter in an Indian’s Decision to Start a New Venture?,” Journal of Entrepreneurship and Innovation in Emerging Economies.
20 Tanweer Ahmad and Sandeep Mondal “Dynamic Supplier Selection Approach for Mining Equipment Company,” Journal of Modelling in Management, September 2018.
21 Aparna Choudhary, S. Mondal and K. Mukherjee “Analysis of critical factors influencing the management of green supply chain practice in small and medium enterprises,” International Journal of Logistics Systems and Management, 28(2), 2017.
22 Pallavi Pandey, Singh S. and Pathak P. “Factors affecting turnover intention among front end employees in the Indian retail industry,” International Journal of Human Resource Development and Management, Accepted for publication (ABDC, Category C), 2017.
23 Pallavi Pandey, Singh S. and Pathak P. “Devising retention strategy for front line employees in retail: An application of Analytic Hierarchy Process,” International Journal of Service, Economics and Management, Accepted for publication (ABDC, Category C), 2017.
24 Suresh K. Sahoo and Jagannath Panda “Impact of Corporate Disclosure on investor’s attractiveness,” Amity Business Journal, 6(2), pp. 15-19, 2017.
25 Suresh K. Sahoo and Pooja Shree Bhuyan “A Comparative Study on Assets Quality of Banks with special reference to Public and Private Sector Banks Operating in India,” Journal of Research, Extension and Development, 5(11), pp. 14-18, 2017.
26 Saket Jeswani “Assessment of Employability Skills among Fresh Engineering Graduates: A Structural Equation Modeling Approach,” The IUP Journal of Soft Skills, 10(2), 2016.
27 Saket Jeswani “Do Intrinsic Motivation Influence Turnover Intention? Structural Equation Modelling Approach Among Technical Faculty Members,” International Journal of Business and General Management, Special Edition, 2016.
28 Aparna Choudhary, S. Mondal and K. Mukherjee “Green Supply Chain Management: Genesis, Trends and Phases,” Journal of Applied Economic Sciences, 11(3), pp. 450-460, 2016.
S. No. Main Author(Internal) Title of Paper with Journal Details
1 Dr. R. S. Singh “Bench Top Process and Their Scalability for Industrial Production of Nanoparticles Insights,” Indian Journal of Pure & Applied Physics, 63 (5) (2025). DOI: https://doi.org/10.56042/ijpap.v63i5.18117
2 Dr. Ram Sevak Singh “Bench Top Process and Their Scalability for Industrial Production of Nanoparticles Insights,” Indian Journal of Pure & Applied Physics (SCI Indexed) with OPJU affiliation, May 2025.
3 Dr. Ram Sevak Singh “Graphene electrode assisted additive-free synthesis of crystalline silver dendrites: An efficient material for supercapacitor applications,” Journal of Energy Storage, 119 (2025) 116340. DOI: https://doi.org/10.1016/j.est.2025.116340 (April 2025)
4 Dr. Ram Sevak Singh “Fermi-level tuning in graphene via green synthesized h-MoO3: Enhanced supercapacitor performance of h-MoO3 doped graphene,” Journal of Alloys and Compounds (SCI Indexed, Impact Factor 5.8).
5 Dr. Dipti Shukla “Leading AI Applications in the Sustainable Energy Sector,” in the book AI and Blockchain in Smart Grids (Taylor and Francis Group). ISBN: 9781003500391.
6 Dr. G. C. Mishra “Effect of Dopant Concentration on Luminescence Properties of Na3Ca2(SO4)3F: RE (RE = Eu3+, Dy3+) Phosphor for Solid-State Lighting,” Journal of Luminescence (Wiley & Sons).
7 Mr. Shivam Pandey “Effect of process parameters on the rheological properties of banana (Musa acuminata) fiber and optimization using response surface methodology,” Journal of Agriculture and Food Research. DOI: https://doi.org/10.1016/j.jafr.2024.101314
8 Dr. R. S. Singh “Solution-processable PEDOT:PSS/WS2 nanocomposite electrodes for high-performance supercapacitors,” Journal of Energy Storage, 103 Part B (2024) 114348. DOI: https://doi.org/10.1016/j.est.2024.114348
9 Dr. R. D. Patidar “Influence of CuO Layer on the Performance of Thin-Film Copper Indium Gallium Selenide Solar Cells: A Numerical Analysis,” J. Electron. Mater. 54, 609–619 (2025). DOI: https://doi.org/10.1007/s11664-024-11588-7
10 Dr. R. S. Singh “Acetone Gas Sensing with Pt-Doped SiC Nanotubes for Diabetes Detection at Room-Temperature,” Silicon (SCI Indexed).
11 Dr. R. S. Singh “Aggregation Induced Strong Photoluminescence at Room Temperature in Large-Area C8BTBT Thin Films,” Synthetic Metals (SCI Indexed).
12 Dr. R. S. Singh “Influence of Nano-CeO2 and Graphene Nanoplatelets on the Conductivity and Dielectric Properties of Poly(vinylidene fluoride) Nanocomposite Films,” Langmuir (ACS Publications), Jan 2024.
13 Dr. R. S. Singh “Modeling and Simulation of Thin Film InP/GaAs Dual Junction Solar Cells,” Iranian Journal of Chemistry and Chemical Engineering (SCI Journal, 2023). DOI: 10.30492/IJCCE.2023.563052.5625
14 Dr. R. S. Singh and Dr. R. D. Patidar “Simple Thermal Annealing Assisted Direct Synthesis and Optical Property Study of CuO Nanoparticles Incorporated PVA Films,” physica status solidi(a) (Wiley). DOI: https://doi.org/10.1002/pssa.202300328
15 Dr. Girish C. Mishra “Lyoluminescence study of γ-ray irradiated Cu doped YCa4O(BO3)3 microcrystalline phosphors for Radiation Dosimetry applications,” European Chemical Bulletin (Scopus Indexed). DOI: 10.48047/ecb/2023.12.si6.677
16 M. R. Mishra, Dr. D. Samal and Dr. S. Singh “Laplace Transform Approach for an Impulsively Moving Plate on a Copper-Water Based Magneto-Nanofluid with Isothermal and Ramped Temperature,” China Petroleum Processing and Petrochemical Technology, Vol. 23, Issue 2, July 2023.
17 Dr. Kavita Patel “Comparative Study of Physico-chemical Parameters of Groundwater of Residential and Industrial area of Sirgitti in Bilaspur District,” International Journal of Membrane Science and Technology, 10, 1128 (2023).
18 Dr. Debasmita Samal and M. R. Mishra “A Ramp-Type Deterioration EOQ Model with On-Hand Inventory,” Kepes, 21, 763 (Scopus Indexed, 2023).
19 Dr. R. S. Singh “X-ray photoelectron spectroscopy and tunable photoluminescence study of gold nanoparticles embedded in PVA films,” Luminescence (Wiley, SCI Indexed), 2023. DOI: https://doi.org/10.1002/bio.4607
20 Dr. Dipti Shukla "Luminescence Properties of Ce doped Di-Calcium Magnesium Disilicate Ca2MgSi2O7" in a SCOPUS-indexed journal: Research Journal of Chemistry and Environment, Nov. 2023
21 Dr. G. C. Mishra Photoluminescence and thermoluminescence study of Ca1.02Sr1.98Al2O6: Dy phosphor synthesized by combustion method, Materials Letters: X, May 2023
22 Dr. Swati Verma A New Ntru Cryptosystem With Block Matrix Formulation, European Chemical Bulletin, May 2023
23 Dr. Dipti Shukla Effect of Autoclave and Non-Autoclave Hydrothermal Synthesis Methods on the Structural Properties and Optical Properties of LiBaF3 Phosphor: A Comparative Study, Materials Today: Proceedings, May 2023
24 Dr. K. N. Singh Effect of B-site disorder on the electrical properties of Barium Zirconium Titanate Ceramics composites, ES Materials and Manufacturing, April 2023
25 Dr. Dipti Shukla To Study of the effect of reheating on structural characterization and Photo luminescence, GIS Science Journal, 9, 2318
26 Dr. Dipti Shukla Evaluation of the novel Blue Emitting Phosphor with High Thermal Stability and High Color Purity for Solid State Lighting Applications - Ca2MgSi2O7: Eu2+, Journal of Chemistry and Environment
27 Dr. Dipti Shukla To Study Thermo-Luminescence Properties, And Dosimetry Features of Fluoro-Perovskites (BaLiF3), GIS Science Journal, 9, 2325
28 Dr. Girish Mishra Novel red colour emitting Ca0.995Mg2(SO4)3:0.5Eu2+ phosphor under UV, blue and green excitation for plant growth LEDs, Luminescence: The Journal of Biological and Chemical Luminescence (John Wiley & Sons)
29 Dr. Girish Mishra Enhanced luminescence in co-doped LaCa4O(BO3)3 phosphor: Photoluminescence, Mechanoluminescence and Thermoluminescence study, Optik: International Journal for Light and Electrons Optics (Elsevier)
30 Dr. Girish Mishra Improvement of self-activated luminescence properties of Ca2KZn2(VO4)3 down-conversion materials by SSR method based on co-doped Eu3+, Dy3+ rare earth ions concentrations, Journal of Molecular Structure
31 Dr. R. S. Singh Sulfur-doped silicon carbide nanotube as a sensor for detecting liquefied petroleum gas at room temperature, Diamond and Related Materials 124 (2022): 108932
32 Dr. R. S. Singh Shellac derived graphene on solid, flexible, and porous substrates for high performance bipolar plates and supercapacitor electrodes, Renewable Energy (Elsevier), 2022
33 Dr. R. S. Singh Engineering the Electronic Structure in Titanium Dioxide via Scandium Doping Based on Density Functional Theory Approach for the Photocatalysis and Photovoltaic Applications, Iranian Journal of Chemistry and Chemical Engineering, 2022
34 Dr. R. S. Singh Recent Developments in Chemical Doping of Graphene using Experimental Approaches and its Applications, Advanced Engineering Materials, 2022
35 Dr. Manas Ranjan Mishra Dynamics of heat absorbing and radiative hydromagnetic nanofluids through a stretching surface with chemical reaction and viscous dissipation, Journal of Process Mechanical Engineering, 2022
36 Dr. K. N. Singh Ferroelectric Relaxor Behavior and Dielectric Relaxation in Strontium Barium Niobate – A Lead-Free Relaxor Ceramic Material, Engineered Science, 2022
37 Dr. Swati Verma Management of the Oil and Gas Industry Using the Chameleon Hash Algorithm for Blockchain Technology, Neuro Quantology, 2022
38 Dr. Girish C. Mishra Materials Science and Engineering, “Synthesis characterization and Luminescence Properties of B2BiMg2V3O12 based phosphors with rare earth activated Dy3+ phosphor for solid state lighting”, Oct 2022
39 Dr. R. S. Singh Iranian Journal of Chemistry and Chemical Engineering, “Impact of Post-Processing Technologies in Additive Manufacturing for Aerospace Applications – A review”, Dec 2022
40 Dr. R. S. Singh CRC Press, Taylor & Francis Group, “Emerging Two Dimensional Materials and Applications (Book)”, Dec 2022
41 Dr. R. S. Singh Emerging Two Dimensional Materials and Applications (CRC Press), “Overview of 2D Materials.”, Dec 2022
42 Dr. R. S. Singh Emerging Two Dimensional Materials and Applications (CRC Press), “Role of 2D Materials in Environmental Monitoring.”, Dec 2022
43 Dr. R. S. Singh “Sulfur-doped silicon carbide nanotube as a sensor for detecting liquefied petroleum gas at room temperature”, Diamond and Related Materials, 124, 108932, 2022
44 Dr. R. S. Singh, Jansen, M., Ganguly, D., Kulkarni, G. U., Ramaprabhu, S., Choudhary, S. K., & Pramanik, C “Shellac derived graphene films on solid, flexible, and porous substrates for high performance bipolar plates and supercapacitor electrodes”. Renewable Energy, 181, 1008-1022
45 Bargat, S. R., Parauha, Y. R., Shirbhate, N. S., Mishra, G. C., & Dhoble, S. J. “Novel red color emitting Ca0.995Mg2(SO4)3:0.5Eu2+ phosphor under UV, blue and green excitation for plant growth LEDs. Luminescence, 37, 463-471, 2022
46 Singh, R. S., Rasheed, A., Gautam, A., Singh, A. K., & Rai, V. “Enhanced optical and electrical properties of graphene oxide-silver nanoparticles nanocomposite film by thermal annealing in the air”, Russian Journal of Applied Chemistry, 94(3), 402-409, 2021
47 Gautam, A., Komal, P., Singh, R. S., Gautam, P., Manjari, S. K. V., & Ningthoujam, R. S. “Hardcore proof of the polyvinyl alcohol as a reducer for the formation of gold nanoparticles”. Journal of Molecular Liquids, 334, 116112, 2021
48 Bargat, S. R., Parauha, Y. R., Mishra, G. C., Dhoble, S. B., & Dhoble, S. J. “Photoluminescence Properties of Eu3+ doped KAl(SO4)2 Phosphor”, Journal of Physics: Conference Series, 1913(1), pp. 012027, IOP Publishing, May 2021
49 Kadam, A. R., Kohale, R. L., Mishra, G. C., & Dhoble, S. J. Eu(iii)-Doped tri-calcium Ca3(1−X−Z)MZ(PO4)2AX: X host array: optical investigations of down-conversion red phosphor for boosting display intensity and high color purity. New Journal of Chemistry, 45(16), 7285-7307, 2021
50 Sharma, R., Mishra, G. C., Dhoble, S. J., & Srivastava, A. K. Study of europium doped CaAl2Si2O8 phosphor prepared by solution combustion synthesis: Optical, fracto-mechanoluminescence and thermoluminescence. Optik, 226, 165946, 2021
51 Rai, V., Singh, R. S., Blackwood, D. J., & Zhili, D. “A review on recent advances in electrochromic devices: a material approach.” Advanced Engineering Materials, 22(8), 2000082, 2020
52 Mishra, M. R., Hussain, S. M., Makinde, O. D., & Seth, G. S. “Stability analysis and multiple solutions of a hydromagnetic dissipative flow over a stretching/shrinking sheet.” Bul Chem Commun, 52, 259-271, 2020
53 Hussain, S. M., Sharma, R., Mishra, M. R., & Alrashidy, S. S. “Hydromagnetic dissipative and radiative graphene maxwell nanofluid flow past a stretched sheet – numerical and statistical analysis.” Mathematics, 8(11), 1929, 2020
54 Rastogi, A., Anurag, Nayan, R. “Studies on nickel(II) and mixed nickel(II)-copper(II) complexes of cylindrical macrocycle consisting of four fused cyclen rings.” Research Journal of Chemistry and Environment, 24, 72-86, 2020
55 Patel, K., Khunte, K. L. “Antioxidant Properties of Kalmegh (Andrographis paniculata).” International Journal of Creative Research Thoughts (IJCRT), 9, C163, 2021
56 Verma, S., Das, G. “An Efficient Proxy-Multi Signature Scheme Based On Discrete Logarithm Problem.” International Journal of Creative Research Thoughts (IJCRT), 9, C818, 2021
57 Shukla, D., Pandey, A. “Study of Mechno-luminescence, thermoluminescence properties of solid state reaction derived Ce3+ co-doped Ca2MgSi2O7:Eu2+ microphosphors and application for mechno-luminescent display device technology.” American Journal of Chemical Research, 4, 18, 2020
58 Sao, G. S., Verma, S. “Contraction, Lebesgue and Common Fixed Point Property of Fuzzy Metric Spaces.” International Journal of Discrete Mathematics, 5, 10-14, 2020
59 Shukla, D., Pandey, A. “Synthesis of Ca2MgSi2O7:Eu2+ activated and Ce3+ doped Phosphor for Energy Storage.” Journal of Emerging Technologies and Innovative Research, 6, 549-554, 2019
60 Shukla, D., Pandey, A. “Synthesis and photoluminescent characteristics of Eu2+-activated dicalcium magnesium disilicate blue-emitting phosphors for high power white LEDs.” International Journal of Emerging Technologies and Innovative Research, 6, 549-554, 2019
61 Chandan Ghanty, Chaitali M. Mehare, V. Chopra, N. S. Dhoble & S. J. Dhoble “Luminescence characteristics of O6+ ion beam and γ-ray irradiated Ca9La(PO4)5(SiO4)F2:Eu phosphor.” Radiation Effects and Defects in Solids (Taylor & Francis), 2020
62 Chandan Ghanty, Chaitali M. Mehare, Y. R. Parauha, V. Chopra, S. Ray, N. S. Dhoble, S. J. Dhoble “Tailoring the luminescent properties of Ca9La(PO4)5(SiO4)F2:Eu3+ phosphor via doping of chloride, molybdate, vanadate, sulfate, and tungstate ions.” Journal of Materials Science: Materials in Electronics (Springer), 31, 3426, 2020
63 Girish C. Mishra, A. R. Kadama, S. J. Dhoble “Thermoluminescence study of Eu3+ doped Na2Sr2Al2PO4Cl9 phosphor via doping of singly, doubly and triply ionized ions.” Ceramics International (Elsevier), 46, 132, 2020
64 Ram Sevak Singh, Anurag Gautam, and Varun Rai “Graphene-based bipolar plates for polymer electrolyte membrane fuel cells.” Frontiers of Materials Science (Springer), 13, 217, 2019
65 Neeraj Kumar, Anurag Gautam, Ram Sevak Singh, M. K. Manoj “Study of B4C/Al-Mg-Si composites as highly hard and corrosion resistant materials for industrial applications.” Transactions of Indian Institute of Metals, 72, 2495, 2019
66 Anurag Gautam, Ram Sevak Singh, Pragya Komal “Future demands for High Field MRI Diagnostic.” Journal of Chemical Sciences, 131, 1, 2019
67 Girish C. Mishra, A. R. Kadam, S. J. Dhoble “Effect of singly, doubly and triply ionized ions on downconversion photoluminescence in Eu3+ doped Na2Sr2Al2PO4Cl9 phosphor: A comparative study.” Ceramics International (Elsevier), Accepted October 2019
68 S. M. Hussain, M. R. Mishra, R. Sharma, G. S. Seth “Numerical and Statistical Analysis of MHD Boundary Layer Nanofluid Flow over an Exponentially Stretching Sheet.” International Journal of Heat and Technology, 36(4), 1163-1173, 2018
69 A. Gautam, P. Komal “Probable ideal size of Ln3+-based upconversion nanoparticles for single and multimodal imaging.” Coordination Chemistry Reviews, 376, 393, 2018
70 Saumya Singh, M. Darus “On some new classes of Bi-univalent functions.” Journal of Applied Mathematics, Statistics and Informatics, 14(2), 2018
71 M. R. Mishra, S. M. Hussain, R. Sharma, G. S. Seth “Effect of heat absorption on Cu-water based magneto-nanofluid over an impulsively moving ramped temperature plate.” Bulgarian Chemical Communications, 50(4), 621-630, 2018
72 S. M. Hussain, R. Sharma, G. Mishra “Soret and Dufour effects on viscoelastic radiative and heat absorbing nanofluid driven by a stretched sheet with inclined magnetic field.” Defect and Diffusion Forum, 388, 223-245, 2018
73 S. M. Hussain, J. Jain, G. S. Seth, M. M. Rashidi “Effect of Thermal Radiation on Magneto-Nanofluids Free Convective Flow over an Accelerated Moving Ramped Temperature Plate.” Scientia Iranica B, 25(3), 1243-1257, 2018
74 G. C. Mishra, A. K. Srivastava, S. K. Dwiwedi, S. J. Dhoble, R. S. Kher “Study of Lyoluminescence of γ-irradiated GdCa4O(BO3)3:Ce phosphors: Mass of solute and pH of solvent as a key factor.” Optik, 158, 826-830, 2018
75 S. M. Hussain, H. J. Joshi, G. S. Seth “Radiation Effect on MHD Convective Flow of Nanofluids over an Exponentially Accelerated Moving Ramped Temperature Plate.” Applications of Fluid Dynamics, Lecture Notes in Mechanical Engineering, Springer, 2018
76 S. M. Hussain, R. Sharma, H. Joshi, G. S. Seth “Analysis of Radiative Magneto-Nanofluid over an Accelerated Plate in a Rotating Medium with Hall Effects.” Diffusion Foundations, 11, 129-145, 2017
77 S. M. Hussain, J. Jain, G. S. Seth, M. M. Rashidi “Free Convective Heat Transfer with Hall effects, Heat Absorption and Chemical Reaction over an Accelerated Moving Plate in a Rotating System.” Journal of Magnetism and Magnetic Material, 422, 112–123, 2017
78 S. M. Hussain, R. Sharma, M. K. Mishra, G. S. Seth “Radiative magneto-nanofluid over an accelerated moving ramped temperature plate with Hall effects.” Journal of Nanofluid, 6(5), 840-851, 2017
79 S. M. Hussain, J. Jain and G. S. Seth Hall effects on MHD Natural Convection Flow with Heat and Mass Transfer of Heat Absorbing and Chemically Reacting Fluid past a Vertical Plate with Ramped Temperature and Ramped Surface Concentration, Bulgarian Chemical Communications, 48(4), pp. 659-670, 2016
80 S. M. Hussain, G. S. Seth and S. Sarkar Hydromagnetic Natural Convection Flow with Heat and Mass Transfer of a Chemically Reacting and Heat Absorbing fluid past an Accelerated Moving Vertical Plate with Ramped Temperature and Ramped Surface Concentration through a Porous Medium, Journal of Egyptian Mathematical Society, 23(1), pp. 197-207, 2015
81 S. M. Hussain, and G. K. Mahato Effects of Hall Current and Rotation on Hydromagnetic Natural Convection Flow with Heat and Mass Transfer of a Heat Absorbing Fluid Past an Impulsively Moving Vertical Plate with Ramped Temperature, Journal of Applied Fluid Mechanics, 8(1), pp. 159-171, 2015
82 S. M. Hussain, G. S. Seth and S. Sarkar Hydromagnetic oscillatory Couette flow in a rotating system with induced magnetic field, Applied Mathematics and Mechanics, 35(10), pp. 1331-1344, 2014
83 S. M. Hussain, G. S. Seth and S. Sarkar Effects of Hall Current, Radiation and Rotation on Natural Convection Heat and Mass Transfer Flow past a Moving Vertical Plate, Ain Shams Engineering Journal, 4(2), pp. 489-503, 2014
84 S. M. Hussain, G. S. Seth and S. Sarkar Effects of Hall Current and Rotation on MHD Natural Convection Flow with Heat and Mass Transfer past an Impulsively Moving Vertical Plate in the Presence of Radiation and Chemical Reaction, Bulgarian Chemical Communications, 46(4), pp. 704-718, 2014
85 S. M. Hussain, G. S. Seth and S. Sarkar Hydromagnetic natural convection flow with radiative heat transfer past an accelerated moving vertical plate with ramped temperature in a porous medium, Journal of Porous Media, 17(1), pp. 67-79, 2014
86 S. M. Hussain, G. S. Seth and R. Sharma Hall effects on unsteady MHD natural convection flow of a heat absorbing fluid past an accelerated moving vertical plate with ramped temperature, Emirates Journal for Engineering Research, 19(2), pp. 19-32, 2014
87 S. M. Hussain, G. S. Seth, R. Sharma and S. Sarkar Hall effects on unsteady MHD natural convection flow of a heat absorbing and radiating fluid past an accelerated moving vertical plate with ramped temperature, International Journal of Energy & Technology, 6(12), pp. 1-13, 2014
88 R. Sharma, G. S. Seth and B. Kumbhakar Hydromagnetic Flow of Heat Absorbing and Radiating Fluid over Exponentially Stretching Sheet with Partial Slip and Viscous and Joule Dissipation, Engineering Computations, 33(3), pp. 907-925, 2016
89 R. Sharma, G. S. Seth and B. Kumbhakar Effects of Hall Current on Unsteady MHD Convective Couette Flow of Heat Absorbing Fluid Due to Accelerated Movement of One of the Plates of the Channel in a Porous Medium, Journal of Porous Media, 19(1), pp. 13-30, 2016
90 R. Sharma, G. S. Seth and B. Kumbhakar Heat and Mass Transfer Effects on Unsteady MHD Natural Convection Flow of a Chemically Reactive and Radiating Fluid through a Porous Medium Past a Moving Vertical Plate with Arbitrary Ramped Temperature, Journal of Applied Fluid Mechanics, 9(1), pp. 103-117, 2016
91 R. Sharma, G. S. Seth and B. Kumbhakar Unsteady Hydromagnetic Natural Convection Flow Of A Heat Absorbing Fluid Within A Rotating Vertical Channel In Porous Medium With Hall Effects, Journal of Applied Fluid Mechanics, 8(4), pp. 767-779, 2015
92 R. Sharma, G. S. Seth and S. Sarkar Natural convection heat and mass transfer flow with Hall current, rotation, radiation and heat absorption past an accelerated moving vertical plate with ramped temperature, Journal of Applied Fluid Mechanics, 8(1), pp. 7-20, 2015
93 R. Sharma, G. S. Seth and R. Tripathi MHD Double Diffusive Natural Convection Flow over Exponentially Accelerated Inclined Plate, Journal of Mechanics, 33(2), pp. 613-629, 2017
94 R. Sharma, G. S. Seth and R. Tripathi Effects of a Heat Absorbing, Radiating and Rotating Fluid over an Exponentially Accelerated Moving Vertical Plate with Ramped Temperature, Bulgarian Chemical Communications, 48(4), pp. 770-778, 2016
95 G. C. Mishra, K. K. Satapathy, S. J. Dhoble and R. S. Kher Urea Assisted Self Combustion Synthesis of CaAl2O4: Eu Phosphor And Its Mechanoluminescence Characterization, NJC: Royal Society of Chemistry, 41, pp. 2193-2197, 2017
96 K. K. Satapathy, G. C. Mishra, R. S. Kher and S. J. Dhoble Mechanoluminescence and thermoluminescence characterization of Tb3+ doped CaAl2O4: a theoretical and experimental study, RSC Advance: Royal Society of Chemistry, 5, pp. 79391-79396, 2015
97 K. K. Satapathy, G. C. Mishra Preparation Route, characterization and Dose measurement of MAl2O4 (M=Ba, Ca, Mg) phosphors activated with Dy3+, Journal Of Optoelectronics and Advanced Materials, Vol. 17, No. 5-6, 2015
98 K. K. Satapathy, G. C. Mishra and F. Khan ZnAl2O4:Eu novel phosphor: SEM and Mechanoluminescence characterization synthesized by solution combustion technique, Luminescence: The Journal of Biological and Chemical Luminescence, 30, pp. 564-567, 2015
99 K. N. Singh, P. K. Bajpai and M. Pastor Diffuse Phase Transition and Electrical Conductivity in Pb (Ca1/3Nb2/3)O3, Journal of Electronic Materials, 43, pp. 1403, 2014
100 K. N. Singh, V. Sao and P. K. Bajpai Structural and Raman Spectroscopic Study of Antimony Doped Bi0.5Na0.5TiO3 Electroceramic, Journal of Materials Science and Chemical Engineering, 3, pp. 43-49, 2015
101 K. N. Singh, P. Tamrakar and P. K. Bajpai Relaxor behaviour and dielectric relaxation in Lead-free solid solution (1-x)(Bi0.5Na0.5TiO3)─x(SrNb2O6), Journal of Electronic Materials, 45(2), pp. 928-939, 2016
102 K. N. Singh, S. Agrawal, U. Shrivastava and P. Sharma Dielectric characterization of Pb (Ni1/3Nb2/3) O3 multiferroic material, Indian Journal of Applied Research, 6(3), pp. 335-337, 2016

Major Patents

S. No. Name of the Faculty/student author of the patent Patent Number Date of Award Patent Awarding Agency Status
1 Dr. Dharmender Singh Saini 432065-001 - India Granted
2 Dr. Amit Jain 412846-001 - India Granted
3 Dr. Deepti Sharma 436856-00 - India Granted
4 Dr. M Kalyan Phani 426482-001 - India Granted
5 Dr. Mukesh Desai 415258-001 - India Granted
6 Mr. Umashankar Pandey 381482-001 - India Granted
7 Dr. M Kalyan Phani 424755-001 - India Granted
8 Dr. Prasenjit Biswas 414473-001 - India Granted
9 Mr. Umashankar Pandey 381482-001 - India Granted
10 Dr. M Kalyan Phani 408924-001 17-02-2024 India Granted
11 Dr. RD Patidar, Dr. S.S. Chakrabarti, Dr. Deepayan Priyadarshi, Mr. Bhakta Kumar Sethi, Dr. Satish Kanhed 202421011347 22-03-2024 India Granted
12 Dr. Mukesh Shyamkant Desai 368188-001 2023 India Granted
13 Dr. Mukesh Shyamkant Desai 393716-001 2023 India Granted
14 Dr. RD Patidar, Dr. G Madhusudhana Rao, Dr. Sushree Diptimayee, Mr. Prashanta Kumar Jena, Shashikanth Kaushaley, Mr. Rakesh Patidar, Mr. Kapol Nashine 379249-001 10-05-2023 India Granted
15 Dr. Rakesh Nayak 384231-001 07-07-2023 India Granted
16 Dr. Siddharth Chakravarti 380834-001 07-06-2023 India Granted
17 Prof Jitesh Singh, Dr. Satish Kanhed 2023/02070 31-05-2023 South Africa Granted
18 Dr. RD Patidar, Dr. G Madhusudhana Rao, Dr. Sushree Diptimayee, Mr. Prashanta Kumar Jena, Mr. Shashikanth Kaushaley, Mr. Rakesh Patidar, Mr. Kapol Nashine 379282-001 16-05-2023 India Granted
19 Dr. Arti Vaish 202311017171 24-03-2023 India Published
20 Dr. Arti Vaish 202311014382 17-03-2023 India Published
21 Dr. Ankur Rastogi 202311016895 17-03-2023 India Published
22 Dr. Rakesh Nayak, Dr. Bhupesh Kumar Dewangan 371116-001 15-03-2023 India Granted
23 Dr. Amit Jain 202341006024 24-02-2023 India Published
24 Dr. Siddharth Chakrabarti, Dr. Satish Kanhed, Dr. Kalyan Phani, Dr. RD Patidar 20 2023 100 029 10-02-2023 Germany Granted
25 Dr. Anurag Sharma 202331004058 03-02-2023 India Published
26 Dr. Siddharth Chakrabarti, Dr. Satish Kanhed, Dr. Kalyan Phani, Dr. RD Patidar 20 2022 107 235 23-01-2023 Germany Granted
27 Dr. Deepak Singh 202311000305 20-01-2023 India Published
28 Dr. Gulshan Soni 202311003249 20-01-2023 India Published
29 Prof. Shashikant Kaushaley 202341001491 13-01-2023 India Published
30 Dr. Satish Kanhed, Dr. M. Kalyan Phani, Dr. Siddharth Chakrabarti, Dr. Ashok Srivastava 202121056205 06-01-2023 India Published
31 Dr. Swapnasarit Kar 202211072025 06-01-2023 India Published
32 Prof. Pushpanjali Shadangi 202241067469 23-12-2022 India Published
33 Dr. Gulshan Soni 202241070928 16-12-2022 India Published
34 Prof. Shashikant Kaushaley 202241070477 09-12-2022 India Published
35 Mr. Prasanta Kumar Jena 202241070477 09-12-2022 India Published
36 Dr. Rakesh Patidar 202241065491 25-11-2022 India Published
37 Prof. Shashikant Kaushaley 202241064833 18-11-2022 India Published
38 Mr. Prasanta Kumar Jena 202241063781 18-11-2022 India Published
39 Dr. Satish Kanhed, Dr. Trinath Talapaneni, Dr. Siddharth Chakrabarti 2021/10662 29-06-2022 South Africa Granted
40 Dr. Saurabh Gupta 202221031673 17-06-2022 India Published
41 Dr. Saurabh Gupta 202221031673 17-06-2022 India Published
42 Prof. Neeraj Kumar 2022/03893 25-05-2022 South Africa Granted
43 Dr. Rakesh Nayak (Non OPJU) 20/2022/101/198 19-05-2022 Germany Granted
44 Dr. Satish Kanhed 202221021774 06-05-2022 India Published
45 Dr. Satish Kanhed, Dr. Siddharth Chakrabarti, Dr. Trinath Talapaneni 202021047105 29-04-2022 India Published
46 Dr. Deepak Patel 202241016038 08-04-2022 India Published
47 Dr. Ajit Kumar Singh 202221004571 18-03-2022 India Published
48 Dr. Satish Kanhed 202221008802 11-03-2022 India Published
49 Dr. Mukesh Desai, Dr. Mithilesh Sahu 202241006974 04-03-2022 India Published
50 Dr. Satish Kanhed 202221002497 11-02-2022 India Published
51 Dr. Ashok Bhansali, Dr. RD Patidar, Dr. Mahendra Shrivas, Prof. Pradeep Chauhan 202121050004 14-01-2022 India Published
52 Mr. Gabhane Mohit, PhD Scholar 2021107426 23-12-2021 Australia Granted
53 Dr. Prashant Bokare 2021106705 09-12-2021 Australia Granted
54 Prof. Neeraj Kumar DE20/2021/105/684/U1 02-12-2021 Germany Published
55 Prof. Neeraj Kumar 2021104459 11-11-2021 Australia Granted
56 Mr. Prateek Dighe, PhD Scholar 202141041225 29-10-2021 India Published
57 Prof. Neeraj Kumar 2021101683 17-06-2021 Australia Granted
58 Dr. Satish Kanhed, Dr. Siddharth Chakrabarti 201921036338 05-03-2021 India Granted
59 Dr. Satish Kanhed, Dr. Siddharth Chakrabarti 201921049003 04-12-2020 India Published
60 Dr. Satish Kanhed, Dr. Siddharth Chakrabarti 201921049005 04-12-2020 India Published
61 Dr. Girish Mishra 201921035528 04-11-2020 India Granted
62 Dr. Satish Kanhed, Dr. Siddharth Chakrabarti 201921049004 11-09-2020 India Published
S. No. IP Registration Number Name of Faculty School/ Department File Date National /International Status
1 202321007442 Dr. Jaya Prakash Rath Dr. Saurabh Gupta SoM 31-03-2023 India Published
2 202341013222 Dr. Himanshu Vaishnav SoM 17-03-2023 India Published
3 202321008875 Dr. Saket Jeswani SoM 24-02-2023 India Published
4 202321007442 Dr. J PRath and Dr. Saurabh Gupta SoM 31-03-2023 National Published
5 202341013222 Dr. HimanshuVaishnav SoM 17-03-2023 National Published
6 202321008875 Dr. SaketJaswani SoM 24-02-2023 National Published
S. No. Name of the Faculty/student author of the patent Patent Number Date of Award Patent Awarding Agency Status
1 202341015521 Prof. Manas R. Mishra SoS 17/03/2023 National Published
2 202341003382 Prof. Manas R. Mishra SoS 27/01/2023 National Published
3 202341003877 Dr. K N Singh, Dr. Girish C Mishra SoS 17/02/2023 National Published
4 202341007276 Dr. Anal Kant Jha SoS 24/02/2023 National Published
5 2022/07836 Dr. Dipti Shukla SoS 27/10/2022 International Granted
6 202211070739 Dr. Soumya Singh SoS 07/12/2022 National Published
7 202221039611 Dr. Ram Sevak Singh SoS 11/07/2022 National Published
8 202241039620 Dr. KN Singh SoS 11/07/2022 National Published
9 202241018864 Dr. KN Singh SoS 11/07/2022 National Published
10 202221022529 Dr. KN Singh, Dr. Deepak Patel SoS 16/04/2022 National Published

FDP

Faculty Development Program

School of Engineering

Title From To Department
AI-Driven robotics and industrial automation for industry 4.0 transformation 14th April, 2025 18th April, 2025 Mechanical Engineering - SOE, OPJU
Advanced and Sustainable Manufacturing Technology 6th January, 2024 10th January, 2024 Mechanical Engineering - SOE, OPJU
Empowering cybersecurity through artificial intelligence and machine learning 16th December, 2024 20th December, 2024 Computer Science and Engineering - SOE, OPJU
Sustainable Advances in Civil Engineering: Exploring Innovative and Contemporary Research Areas 1st April, 2024 5th April, 2024 Civil Engineering - SOE, OPJU
Iron and Steel Technology: Recent Advancements, Innovations and Future Prospects 4th March 2024 5th March 2024 Metallurgical - SOE, OPJU
STTP on Role of IoT in Smart Systems and Infrastructure 3rd Oct 2023 7th Oct 2023 Electrical - SOE, OPJU

School of Management

Title From To Department
FDP on Innovative Solutions to Research with SPSS 9th Oct 2023 13th Oct 2023 SOM, OPJU

School of Science

Title From To Department
Recent Advancements in Materials and Applications (RAMA' 25) 13th January, 2025 17th January, 2025 SOS, OPJU
FDP on Recent Trends in Mathematics and Technology 9th Oct 2023 13th Oct 2023 SOS, OPJU

Book Chapter


Books/Edited Volume Published
S.No. Main Author
(Internal)
Title of Paper with Journal Details
1 Dr. Umesh Kumar Vishwakarma, Dr. Dharmender Singh Saini, Prof. Akash Pandey “Triplex Hybrid-Based Grinding-Assisted Electrochemical Discharge Machining Process” in the book titled “Advancements in Machining Processes Through Hybrid and Sequential Approaches”, eBook ISBN9781003597230, 1st Edition, CRC Press, (Taylor and Francis Group) 2025. https://doi.org/10.1201/9781003597230
2 Dr. Trinath Talapaneni and Dr. Vatsala Chaturvedi "Materials Used in the Design of Semiconductor Devices” in the book titled "Semiconductor Nanoscale Devices: Materials and Design Challenges, Bentham Books (2025), ISBN: 978-981-5313-20-8 (Online), DOI: 10.2174/97898153132081250101, April 2025
3 Dr. Pradeep Kumar Shriwas "Role of AI in Diagnosis of Viral Infection”, In: Chatterjee, J.M., Sujatha, R., Saxena, S.K. (eds) Role of Artificial Intelligence, Telehealth, and Telemedicine in Medical Virology. Medical Virology: From Pathogenesis to Disease Control, Springer, Singapore (2025) 31-51. DOI, April 2025
4 Dr. M Kalyan Phani Present and the Future of Mechanically alloyed materials, Mechanically alloyed Novel Materials, Springer Nature, pp. 459-469 (November 2024) (Book Chapter)
5 Dr. Swati Verma Digital Forensics: Using Blockchain in Cryptocurrency Investigations, book “Fintech, and Blockchains Trends in The Financial Sector” (Bentham Science). Book Link
6 Dr. Anurag Sharma Seismic Assessment of Vertically Irregular RC Buildings Designed Using DDBD and FBD Approaches. In: Goel, M.D., Vyvahare, A.Y., Khatri, A.P. (eds) Recent Developments in Structural Engineering, Volume 4. SEC 2023. Lecture Notes in Civil Engineering, vol 549. Springer, Singapore. DOI (Book Chapter)
7 Dr. Trinath Talapaneni & Dr. Vatsala Chaturvedi “Consolidation of Mechanically Alloyed Powders” in the book Mechanically Alloyed Novel Materials. Advanced Structured Materials, vol 220. Springer, Singapore pp.111-169 (2024). DOI (Book Chapter)
8 Dr. M Kalyan Phani “Theory of Engineering Fluid Mechanics”, Authors Click Publishing, India, 2024 (ISBN:978-93-6665-253-5)
9 Dr. Mithilesh Sahu “Improvement of Aerodynamic Performance of Aerofoil Design by Using Shark Skin Inspired Denticles" in “Recent Advances in Mechanical Engineering.”, April 2024
10 Dr. Amit Jain "Enhancing electric vehicle charging efficiency in urban areas with 5G network integration and network attack mitigation" in CRC Taylor & Francis Book "Networks Attack Detection on 5G Networks using Data Mining Techniques”, Apr. 2024
11 G. Madhusudan Rao Hybrid Electric Vehicles, IIP (Iterative International Publishers), India with ISBN:978-93-5747-293-7
12 Dr. Mithilesh Kumar Sahu, Dr. Siddharth Chakrabarti IGI Global : Sustainable Approaches and Strategies for E-waste Management and Utilization, April 2023
13 Dr. Rakesh Nayak Foundation of Computer Science, GCS Publishers, May 2023
14 Dr. Rajesh Jha Artificial Intelligence–Aided Materials Design: AI-Algorithms and Case Studies on Alloys and Metallurgical Processes, CRC Press, 2022
15 Dr. K.N. Singh Applied Physics, 2022, Evincepub Publishing
16 Dr. Rakesh Nayak Human-Machine Interaction and IoT Applications for a Smarter World, CRC Press
17 Dr. Bhupesh Dewangan Challenges and Applications for Hand Gesture Recognition, IGI Global
18 Dr. Rakesh Nayak CRC –Press (Book), “Python for Engineers and Scientists Concepts andApplications”, Jan. 2023
Book Chapters Published
Main Author
(Internal)
Title of Paper with Journal Details
1 Dr. R. S Singh Electrospun Carbon Nanofibers Based Materials for Flexible Supercapacitors: A Comprehensive Review. Nanostructured Materials for Energy Storage 3 (2024): 1189-1218 (Wiley). https://doi.org/10.1002/9783527838851.ch32 (Book Chapter)
2 Dr. R. S Singh Physics: Basics & Advanced Concepts. ISBN-13: 978-81-979445-4-3 (CIRS Publication) (Book)
3 Dr. Dipti Shukla Communication Electronics -II Principle and Applications. Monica Bhandari Books (Book)
4 Dr. Dipti Shukla Beyond Words: The Art and Science of Communication, SHINEEKS Publishers (Book)
5 Dr. T Gayatri Natural Products in Management of MDR. In: Sharma, T., Sahoo, C.R., Bhattacharya, D., Pati, S. (eds) Natural Products for Antibacterial Drug Development: Recent Advancement of Computational Approach. Springer, Singapore. https://doi.org/10.1007/978-981-97-9634-2_2
6 Dr. T Gayatri Multidrugs Resistance: Concepts, Mechanisms, and Recent Advances. In: Sharma, T., Sahoo, C.R., Bhattacharya, D., Pati, S. (eds) Natural Products for Antibacterial Drug Development: Recent Advancement of Computational Approach. Springer, Singapore. https://doi.org/10.1007/978-981-97-9634-2_10
7 Dr. Rakesh Nayak Intelligent Techniques For Predictive Data Analytics, IEEE-Wiley, July 2023
8 Dr. Rakesh Nayak Intelligent Engineering Applications and Applied Sciences for Sustainability, IGI Global, July 2023
9 Mrs. Suchismita Panda Navigating Neoliberal Ethnicity in Sankar’s The Middleman in an edited book, English Literature: Texts, Contexts and Concepts, ISBN:978-93-92459-13-9
10 Dr. Taniya Sen Gupta Emerging Microbial Enzymes for Future Industrialization in an edited book, Microbial Products for Future Industrialization, Springer Nature, ISBN: 978-981-99-1739-6
11 Dr. Taniya Sengupta Rathore CRISPR: An Advance Technique of Gene Editing, in Current Advances in Biosciences, Thanuj International Publishers, ISBN: 978-93-94638-64-8
12 Dr. Dipti Shukla Antenna Design for IOT and Biomedical Application in an edited book, Array and Wearable Antennas Design, Optimization, and Application, CRC Press
13 R.S. Singh Nanomaterials-based biosensors, Advanced Nanomaterials for Point of Care Diagnosis and Therapy, 1st Edition - March 11, 2022
14 Adil Khan Cognitive Antecedents of the Agricultural Entrepreneurship Intentions of Indian University Students, Driving Factors for Venture Creation and Success in Agricultural Entrepreneurship. IGI Global, 2022
15 Neeraj Verma Surface Coatings and Functionalization Strategies for Corrosion Mitigation, Functionalized Nanomaterials for Corrosion Mitigation: Synthesis, Characterization, and Applications. ACS e-book, Aug. 2022
16 Mahashakthi Mahamaya Geotechnical Characteristics of Soil and Rocks of India: Chattisgarh, Book Chapter, Taylor and Francis CRC Press, 2021
17 Pushpanjali Power quality improvement by using PV integrated DSTATCOM, Book: Linear and Nonlinear System Modelling, Wiley (In Press)
18 Bhupesh Dewangan Hand Gesture Recognition Through Depth Sensors. Challenges and Applications for Hand Gesture Recognition, IGI Global, 2022
19 Bhupesh Dewangan Application of HGR Rock-Paper-Scissors Model, Challenges and Applications for Hand Gesture Recognition, IGI Global, 2022
20 Abhilasha Chaudari Computational Intelligence for Healthcare, Next Generation Health Care Systems Using Soft Computing Techniques, CRC Press, 2022
21 Saroj Chandra Mathematical Model with Social Distancing Parameter for Early Estimation of COVID-19 Spread, MedRXiv, Book Chapter, 2021, Springer
22 Saroj Chandra Three-Dimensional Fractional Operator for Benign Tumor Region Detection, Springer, Book Chapter, 2021
23 Mithilesh Sahu Hybrid Power Cycle Arrangements for Lower Emissions, Solid Oxide Fuel Cell Integrated Blade Cooled Gas Turbine Hybrid Power Cycle, CRC Press, 2022
24 A. Bhansali Machine Learning for Sustainable Agriculture, Blockchain 3.0 for Sustainable Development, DE GRUYTER
25 Anurag Vijayawargiya Effect of Lifting Height and Weight Magnitude on Biomechanical Loading During Manual Lifting, Technology Enabled Ergonomic Design. Springer, Singapore, 2022. pp.185-195
26 R.S. Singh Emerging Two Dimensional Materials and Applications, July 2022, ISBN: 9781032162874
27 Das, A., Rai, V., Behera, K., Singh, R. S Nanomaterials Based Biosensors, Advanced Nanomaterials for Point of Care Diagnosis and Therapy. Elsevier, ISBN:9780323857253, 2022
28 Singh, R. S., Rai, V., & Singh, A. K. 2D Dichalcogenides. 2D Functional Nanomaterials: Synthesis, Characterization and Applications, pp.317-334. Wiley-VCH, ISBN: 978-3-527-34677-6, 2021

Workshops

Workshop & Seminar


School of Engineering

Title Year Key Speakers Department Sponsor/in association with
Emmision Control Strategies Thermal Power Plants 2023 Dr Mithilesh Sahu, Dr Sandeep Biswal ME/EE OPJU
Online course on Autocad Essentials 2023 Mrs Leena Behara ME Mechanical
Entrepreneurship and Innovation as Career Opportunity 2023 Dr Ashhar Ahmed Shaikh OPJU Innovation Centre OPJU Innovation Centre
Theory of Constraints (ToC): An Innovative Approach in Higher Education 2023 Dr RD Patidar Academic Staff College IQAC & NAAC
Two day workshop on Professional Practices in the Cement and Construction Industry 2023 Department of Civil Engineering CE Ultratech Cement, Raigarh
A National Workshop on Drone Technology 2023 Department of Mechanical Engineering ME Center of Excellence in Robotics
E-Commerce Management 2023 Dr. Sukanta Sahu, Associate Professor, School of Management, OPJU CSE OPJU
Human Value and Professional Ethics 2023 Mr. Bhupendra Thripathi, Assistant Professor, School of Management, OPJU CSE OPJU
Design Thinking for Corporates 2023 Ms. Aishwarya Agrawal, Senior Software Consultant, Infosys. Ltd. EE OPJU
Advanced Welding Technology 2023 Mr V.V. Kamath, Managing Director, Fronius India Pvt. Ltd. ME Center of Excellence in Robotics
Internet of Things 2018 Mr. Bipul Kumar, Skill IT Hyderabad CSE OPJU
Data Science & Machine Learning 2018 Stuti Kumari, Upashak Pal from Ardent Computech Pvt Ltd, Kolkata CSE OPJU
Modelling and Analysis of Civil Engg. Structure by using Software 2018 Dr. Govardhan Bhat Asst. Professor, NIT Raipur Civil OPJU
MATLAB & Simulation on Power Electronics and Control 2018 Mr. J.K. Pradhan (Asst. Professor VSSUT, PhD from IIT Bhubneshwar) from BURLA. Mr. Ranjan Pramanik (Asst. Professor, OPJU) EE OPJU
Industrial Automation.(Dual Degree Training Certification Program) 2018 Mr. Kuldeep Mishra (Branch Manager SOFCON PVT LTD, (NSDC Bhopal) EE OPJU
Indo-Danish Tool Room, Patna and OPJU teams up to organize one week training programme on CAE software (ANSYS 16.0) 2018 Mr Krishna Kumar Singh, Senior Engineer, TRTC Patna ME OPJU
Recent trends in iron and steel making (RTISM) 2018 1. Dr Subhas Ganguly, Professor, Department of Metallurgical Engineering, NIT Raipur. 2. Shri Ajay Pradhan, Deputy Manager, JSPL, Raigarh. 3. Dr Anindya Basu, Professor, Department of Metallurgical and Materials Engineering, NIT Rourkela. 4. Shri Pradip Patra, Vice President, JSW Dolvi, Mumbai. METAL OPJU
Plagiarism: Meaning, Importance, Prevention 2017 Customer Success Manager- South & West India, Sri Lanka and Maldives, TurnitIndia Education Pvt. Ltd., Noida METAL OPJU
Turnitin software and its uses to generate similarity reports: One-line Demo 2017 Customer Success Manager- South & West India, Sri Lanka and Maldives, TurnitIndia Education Pvt. Ltd., Noida METAL OPJU
Metallographic Techniques and Mineral Processing 2016 Dr. Syed Nasimul Alam (NIT Rourkela) & Dr.Vinod Kumar (NML JSR) METAL OPJU
Metal casting 2016 Dept. of Metallurgical Engineering METAL OPJU
Ceramic Tiles Preparation 2016 Dept. of Metallurgical Engineering METAL OPJU
Thermo-dynamic simulation studies in steel research & development 2016 Prof. Hari Kumar, IIT Madras METAL Thermo-Calc software AB, Sweden
Recent trends in Metallography and Simulation studies in steel technology 2016 Mr. Georg Vander Voort METAL IIM, Kolkata
Metal casting 2015 Dept. of Metallurgical Engineering METAL OPJU
Ceramic Tiles Preparation 2015 Mrs. Juhi Mukherjee, Kolkata METAL OPJU

School of Science

Event Name Year Facilitator Department Sponsor/in association with
The Entrepreneur within You: From Dreamer to Achiever 2023 Mr. Swopnil D Topre, CEO and Founder, Migrow Group of Companies Biotechnology, SOS, OPJU OPJU
Mental wellbeing & Stress Management 2023 Dr. Ashish Kumar Panda, Deputy Secretary, NITI Aayog, Gol ASC, IIC, OPJU OPJU
Writing of Research Papers and Preparation of Research Project Proposal 2023 Dr. Sanjay J. Dhoble, Professor, RTM Nagpur University, Nagpur ASC, IQAC, RDC, OPJU OPJU

Expert Talk

School of Engineering

Event Name Year Facilitator Department Sponsor/in association with
Online Session on Logic building 2023 Mr. Kanishak Sharma, Software Development Engineer, Zoomcar India Pvt Ltd SOE OPJU
Online Session on Internet of Things applications 2023 Mr. Chhavinath Sahu, Software Engineer, Infominez SOE OPJU
Accelerating the adoption of AI 2023 Mr. Rishav Kumar, M.Tech. AI, IIT Hyderabad CSE OPJU
Non Technical Career Prospects After Graduation 2023 Mr. Ayush Sheohare, Campaign Manager, BigWig Media Pvt. Ltd. CSE OPJU
Understanding the Science of Climate Change and its Impact on Groundwater 2023 Dr. Chandan Kumar Singh, Assistant Professor, NIT Raipur Institution Innovation Council OPJU ECO CLUB
Postmodern Media and Politics of Information Communication 2023 Dr. Narayan Jena, Researcher, Faculty of Arts Communication and Indic Studies, Sri Sri University, Cuttack, Odisha EE OPJU
Sustainability & Environment 2023 Dr. Monika Vyas, HoD and Professor, Civil Department, IES University, Bhopal Civil OPJU
The Applications of Thermal and Fluid Engineering 2023 Dr. Sunil Kumar, Texas A&M University, USA ME OPJU
Image Processing & Text Classification 2018 Dr. Ayan Seal, IIITDM Jabalpur CSE OPJU
Modelling and Analysis of Civil Engg. Structure by using Software 2018 Dr. Govardhan Bhat, Asst. Professor, NIT Raipur CIVIL OPJU
PLC/SCADA & PCB designing 2018 Mr. Kuldeep Mishra, Branch Manager, SOFCON PVT LTD, Indore EE OPJU
Advances in Submerged Arc Welding 2018 Mr. Mithilesh K Singh, SSD, Punjipathra ME OPJU
Material Characterization 2018 Prof. (Dr.) Sanjay Vajpai, Dept. of Metallurgical and Materials Engineering, NIT Jamshedpur META OPJU
Optimization process of Boron and Boron-Nitride, Manganese-Sulphide ratio and also the role of AlxN in steel matrix 2017 Mr. Pradeep Patra, JSW Steel, Mumbai META OPJU
NI Academic and Research Program Coordinator (North, West India) 2017 Mr. Karun Jain, National Instrument, New Delhi META OPJU

School of Management

Event Name Year Facilitator Department Sponsor/in association with
Motivational session by successful innovator 2023 Mr. Arpit Chouhan, Founder, CEO, Energy Motors India Pvt Ltd Innovation center and IIC OPJU
Motivational Session on Entrepreneurial Journey 2023 Mr. Karan Kukreja, Founder, GIFLIF SOM OPJU

Central Instrumentation Facility

OP Jindal University (OPJU) has set up the Central Instrumentation Facility (CIF) with the prime objective to support the research and development activities carried out by the faculty, staff, research scholars and students. The sophisticated instruments and advanced facilities in the CIF are a part of various Centre of Excellences established by the University. To promote quality research and innovative solutions, CIF is established with an aim to promote research in the universities, industries and other organizations in and around Chhattisgarh. CIF is housing a wide range of sophisticated analytical and fabrication equipment/techniques for chemical/ mechanical/ metallurgical characterization of a range of materials. CIF is envisaged to nourish collaborative research between OPJU and other academic and Industrial organizations. These facilities will help the faculties, research scholars and students to carry out quality research in fundamental and applied sciences. This subsequently, will help the beneficiaries to publish their research findings in peer reviewed high impact factor journals and also produce high quality dissertations/reports. CIF is responsible to maintain these equipment and ensure a fair utilization among the research community. CIF runs under the purview of Research and Development Cell (RDC) established by the university and also hopes for expansion of the facilities each year and making it a core research facility for the benefit of industries, academic institutes and other organizations in this central part of the nation. A nominal charge is posed on sample testing and analysis and utilization of the facility for research purpose. CIF is expected to self-sustain by revenue generation for the upkeep and maintenance of the facilities.


Objectives of CIF

  • To test and analyse the samples received from in-house members and other organizations.
  • To sign memorandum of understanding (MoU) for collaborative research.
  • To promote quality research by providing high-end testing and research facilities.
  • To be a helping hand in solving various industrial problems.
  • To provide instrumentation facilities to accelerate fundamental and advanced research.
  • To deliver high-end results, leading to innovative patents or publications.
  • To showcase the importance of research to the younger minds of the nation.
  • To provide possible solutions for the neighborhood society wherever necessary.
  • To provide guidance and training to personnel for operation and maintenance of instruments.
  • To organize workshops, seminars, conferences, and symposia.
  • To organize certification programs on various sophisticated instruments.
  • To foster synergistic growth with other organizations.
  • To provide expert guidance on data interpretation and solutions for industry experts.


Procedures

  • Initially the requisition form is to be filled by the beneficiary and should submit the form to the Head, CIF.
  • Once the requisition form is received the time slot (Time and Date of test) will be informed to the beneficiary within 48 hours.
  • In case of utilization of the facilities, the testing/analysis of the samples which are a part of external and internal funding projects will be given first priority. The projects should have in- house faculty/staff members as one of the investigators.
  • Any emergency analysis, a special approval should be recommended by the concerned head of the institution/Research guide to the Vice Chancellor. On receiving the recommendation to the CIF team from the VC Office necessary arrangements will be made on priority basis.
  • If the samples are not claimed till 30 days of receipt by the university the samples will be retained by the university. The concerned member will come to the university and collect the samples or provide the charge for transit or will make necessary arrangements.
  • In case of Metallurgical analysis, CIF suggest the beneficiaries to send the samples with minimum preparation along with the exact status of the sample preparation. Detailed data on sample preparation should also be provided while sending the sample. In case the sample needs preparation, a nominal charge will be posed for the sample preparation.
  • Beneficiaries will be contacted by email / phone after the samples are tested and analysed..
  • For detailed data processing and interpretation the CIF will provide facility on first come first serve basis. If the data interpretation is to be carried out by the CIF personnel then separate charge may be posed. CIF has rights to change the decision whenever required.
  • The users are also given chance to use the software that comes along with the instrument in presence of an CIF member. The facility will be provided on time slot basis. CIF has all rights to change the time slots whenever required.
  • As per the need and whenever required the instruments will be periodically calibrated as per the required standards.
  • All samples will be held for a maximum period of 20 days under room temperature (or refrigerated at 0-10°C) if specified by the user in the requisition form unless and otherwise instructed.
  • In case there is any issue in the sample testing CIF will email the reason to the beneficiary and have rights to cancel the test. In case of cancellation the beneficiary should again proceed for new time slot booking.

Note: Note: Please refer CIF rate sheet for the associated charges for equipment usage. Samples required coatings for SEM characterization need to pay extra charge of Rs. 500/- per sample. Sputter coater will be used for the coating of the sample.


CIF Working Hours

CIF will be open for testing and analysis on all working days (from 9:15 AM to 06:30 PM). During the Specified holidays of the university the facility will remain close for testing and also for any visits. In any month, Fourth and Fifth Saturdays will be reserved for maintenance of systems, meetings and events (workshops/certificate programmes etc.). The timing for sample submission to CIF during the morning hours will be 9:15 AM to 11:00 AM and the timing for collection of samples will be 4:00 PM to 5:30 PM. CIF has all rights to change the timings as per the instructions of higher authorities.


CIF Team

Dr. Makkuva Kalyan Phani
Dr. Makkuva Kalyan Phani

Head, CIF
Professor & Head, META
Ph.D., B.Tech.

Dr. Makkuva Kalyan Phani
Dr. Nithya Muthukumaran

Member, CIF
Vice Dean, Civil
Ph.D., B.Tech.

Dr. Sushree Diptimayee Swain
Dr. Sushree Diptimayee Swain

Member, CIF
Associate Professor & Head, Electrical Department
Ph.D (NIT Rourkela), M.Tech, B.E

Dr. Mahesh K Bhiwapurkar
Dr. Mahesh K Bhiwapurkar

Member, CIF
Dean, Mechanical Department
Ph.D (IIT Roorkee), M.E, B.E.

Dr. Mahasakti Mahamaya
Dr. Mahasakti Mahamaya

Member, CIF
Associate Professor,Civil
Ph.D., B.Tech.

Dr. Nidhi Khobragade
Dr. Nidhi Khobragade

Member, CIF
Assistant Professor, Metallurgy
Ph.D (NIFFT,Ranchi), M.Tech, B.Tech.

Collaborations

List of MoUs/Collaborations

S. No. MoUs Formulated Name of Agencies / Departments Involved Year of MoU Organization Type
01 For Student Exchange and Research Anhui University of Technology (AHUT), China, Sinosteel Metallurgical Engineering & Technology (Tianjin) Co. Ltd (SMETT), China & OP Jindal University, Raigarh, India, Jindal Steel and Power Ltd. (JSPL), India 2017 Research
02 For establishing Advanced Welding Centre of Excellence Fronius India Pvt. Ltd. Pune (MH) & OP Jindal University, Raigarh (C.G.) 2018 Industry
03 For Medical facility for the Faculty, Students and Staff Fortis OP Jindal Hospital & Research Centre, Raigarh (C.G.) & OP Jindal University, Raigarh (C.G.) 2018 Industry
04 For creating an enabling environment for fostering the Entrepreneurial/ Startup activities in the youth of the State AIC@36Inc & OP Jindal University, Raigarh (C.G.) 2018 Industry
05 For offering courses of Training at TPSDI for bringing about Power Plant Familiarization for students undergoing their curriculums and/or desirous of taking industry Certification courses/facilities offered by TPSDI Tata Power Skill Development Institute (TPSDI) & OP Jindal University, Raigarh (C.G.) 2019 Industry
06 For Academic and Scientific Cooperation Bimal Refractories Pvt. Ltd., Saraipali, Raigarh (C.G.) & OP Jindal University, Raigarh (C.G.) 2019 Industry
07 Industry Tirumala Balaji Ferro Alloys, Raigarh 2019 Industry
08 For Academic & Research Govt. KG College Raigarh (C.G.) 2019 Research
09 For Academic, Research & Innovation Innovation Society (2019) 2019 Research
10 For Academic & Research Ajou University, Republic of Korea 2019 Research
11 For Academic & Research Collaborations Innosapien Technologies Pvt. Ltd. Mumbai Research
12 For Long Term Internships, Industrial visits, trainings and Placements JSPL (Steel Structural Division), Punjipathra Raigarh 2020 Industry
13 For Academic Ureka Education Group 2020 Academic
14 For Long Term Internships, Industrial visits, trainings and Placements Nalwa Steel And Power, Raigarh 2020 Industry
15 For enhancing the skills of the students Indian Institute of Welding Technology, Kolkata 2021 Academic
16 For Academics Govt. Polytechnic Sonepur 2021 Academic
17 For Academics & Research Sri Sri University, Bhubaneshwar 2021 Academic & Research
18 For Academics and Trainings FICE Education Private Limited 2021 Industry
19 For Long Term Internships, Industrial visits, trainings and Placements Jindal Steel & Power (JSP), Raigarh 2021 Industry
20 For Internships, Industrial Visits and Trainings Association of Welding Products Manufacturers (AWPM) 2021 Industry
21 For Long Term Internships, Industrial visits, trainings and Placements Jindal Power Ltd. (JPL), Tamnar , Raigarh 2021 Industry
22 For Long Term Internships, Industrial visits and Trainings CSIR- Institute Of Minerals And Materials Technology, Bhubaneswar 2021 Industry
23 For Academic & Research Collaborations, Students and Faculty Exchange Sohar University, Sultanate of Oman 2021 Academic & Research
24 For Research activities Research for Resurgence Foundation, Nagpur, Maharashtra 2021 Research
25 For Academics & Trainings National Institute of Disaster Management (NIDM) Ministry of Home Affairs Govt. of India 2021 Industry
26 For strengthening Industry Academia Interface, Internships & Placements Interbiz Consulting, USA 2021 Industry
27 For Academics activities Govt. Polytechnic Gariyaband 2021 Academic
28 For Academic, Research & Innovation Innovation Society (2021) 2021 Academic & Research
29 For Academics & Research Govt. Polytechnic Gariyaband 2021 Academic
30 For Academics, Exchange of Faculty & Students Career Lifters 2021 Academic
31 For Academics & Research Changwon National University, Korea 2021 Academic & Research
32 For Academics Govt. Polytechnic Bilaspur 2021 Academic
33 For Academics Govt. Polytechnic Balangir 2022 Academic
34 For Academics Mandsaur University (MU), Mandsaur 2022 Academic
35 For Long Term Internships, Trainings and Placements Rexroth (A Bosch Company), Gujrat 2022 Industry
36 For Academics Indian Chapter of ACI 2022 Academic
37 For Long Term Internships, Industrial Visits, Trainings and Students Exchange CSIR- National Metallurgical Laboratory, Jamshedpur 2022 Industry
38 For Long Term Internships, Industrial visits, Trainings & Placements Jayaswal Neco Industries Limited Siltara Raipur 2022 Industry
39 For Academics & Research Activities Jose Maria college Foundation Inc. Philippines 2022 Academic & Research
40 For Academics & Research Activities and Internships Crypto University, Mumbai 2022 Academic & Research
41 For Internship and Placements Amicus Technology, Raipur 2022 Academic
42 For Industrial Visits, Training & Placements Jindal Institute of Power Technology (JIPT), JPL, Tamnar 2022 Industry
43 For Academic & Research activities CSIR- Advanced Materials And Process Research Institute, Bhopal 2022 Academic & Research
44 For Academic, Research & Innovation Innovation Society (2022) 2022 Academic & Research
45 For Academics, Innovation and Entrepreneurship Shri Shankara Mahavidyalay Bhilai 2022 Academic & Research
46 For E-Waste management Karo Sambhav Private Limited 2022 Industry
47 For Trainings and placements Zenus Group, Dehradun 2023 Industry
48 For Academic & Research activities Ghana Institute of Management 2023 Academic & Research
49 For Academics & Research activities RTM University, Nagpur 2023 Academic & Research
50 For Trainings and Placements Bharat Insulation Cables (BIC), Aurangabad, Maharashtra 2023 Academic
51 For Trainings and Placements Shree Ram Iron And Steel Pvt. Ltd., Raipur 2023 Industry
52 For Research and Placements Tata Motors 2023 Industry
53 For Internships, Placements and Research activities Froyo Technology Private Limited 2023 Industry
54 For Academic & Research activities Arka Jain University, Jharkhand 2023 Academic & Research
55 For Academic activities Govt Adityapur Polytechnic, Jharkhand 2023 Academic & Research
56 For Internships, Trainings and Placements activities MSP Steel & Power Ltd Jamgaon Raigarh 2023 Industry
57 For Academic & Research activities Slurry Transportation lab , NIT, Jamshedpur 2023 Industry
58 For Academic activities IEEE Bombay Section 2023 Academic & Research
59 For Academics & Research activities and Students exchange FPT University, Hanoi Campus, Vietnam 2023 Academic & Research
60 For Academic & Research activities ICSI (Institute of Company Secretary India), Raipur Chapter 2023 Academic & Research
61 For Academics & Research activities Guru Ghasidar University, Bilaspur 2023 Academic & Research
62 For Academics & Research activities Govt. Polytechnic, Sambalpur 2023 Academic & Research
63 For Academics & Research activities Sevadal Mahavidyalaya, Nagpur 2023 Academic & Research
64 For Academics & Research activities, Internships Sai Rajeswari Institute of Technology, Proddatur 2024 Academic & Research
65 For Research, Internships & Trainings NTPC, Lara, Raigarh 2024 Academic & Research
66 For Academics & Research activities and Students exchange NIT, Jamshedpur 2024 Academic & Research
67 For Academics & Research Collaborations, Students and Faculty exchange Metropolia University, Finland 2024 Academic & Research
68 For Academics & Research activities, Faculty & Students exchange Veer Surendra Sai University of Technology (VSSUT), Burla 2024 Academic & Research
69 For Academics & Research activities, Faculty & Students exchange Northumbria University, Newcastle, UK 2024 Academic & Research
70 For Academics & Research activities, Faculty & Students exchange O.P. Jindal Global University (JGU), Sonipat, Haryana 2024 Academic & Research
71 For fostering Innovation and Entrepreneurship, supporting Start-ups and Incubation, Enhancing Skill Development and Industry-Academia Connect, Collaborative Research and Developments, Internship and Placement opportunities IIT Bhilai Innovation Technology Foundation 2024 Innovation
72 For Skill Development National Skill Development Corporation (NSDC) 2024 Training
73 For enhancing the quality of curriculum through MOOC courses Coursera 2024 Academic & Research
74 For Skill Development & Research CV Raman Global University, Bhubaneshwar 2025 Training & Skill Development
75 For Research VYT Autonomous PG College, Durg 2025 Academic & Research
76 For Training & Workshops Ingen Dynamics, Bangalore 2025 Academic, Research & Training
77 Academic & Research SGSITS, Indore 2025 Academic & Research
78 To foster innovation and entrepreneurship, support start-ups and incubation, enhance skill development and industry-academia collaboration, and promote joint research, internship, and placement opportunities NIT Raipur 2025 Academic, Innovation & Research
79 Harvard Business Impact 2025
80 To organize industrial training and workshops for faculty and students, while fostering collaboration in academic, research, and training initiatives within the fields of Robotics, AI, and Automation Ingen Dynamics (Bangalore) 2025 Training & Research
81 Undergraduate & Postgraduate Student Exchange Program SGSITS (Indore) 2025 Academic & Research
82 Advanced Skill Development in Emerging Technologies for Faculty and Students through State-of-the-Art Laboratories CTTC (Bhubaneswar) 2025 Skill Development
83 For Academics and Training MetaGate Coaching, Hyderabad 2025 Academic

IPR Cell

About Us

MIC will focus on creating a complete ecosystem that fosters a culture of innovation across all educational institutions—from idea generation to pre-incubation, incubation, and successful graduation from the incubator. MIC also designs ranking systems to identify institutions at the forefront of innovation. OP Jindal University's Intellectual Property Rights Cell (IPR Cell) is actively fulfilling its obligations. Its key objective is to boost the university’s productivity by encouraging the creation of intellectual property through R&D. The cell has filed more than twenty patents across fields like Medical Physics, Solar Cells, Biotechnology, Pharmacology, Textiles, and Electronics. It regularly organizes IPR-related activities.

Intellectual Property Rights are essential in today’s global economy. Fostering innovation is among the Government of India’s sustainable development goals. “An India where Intellectual Property stimulates creativity and innovation for the benefit of all” is the vision of our National IPR Policy. Initiatives like Make in India, Start-up India, Digital India, and Skill India have proven effective. Under the IPR policy, OPJU’s IPR Cell collaborates with the Office of the Controller General of Patents, Designs and Trademarks to facilitate the creation and commercialization of IP assets.

The IPR Cell at OPJU provides a platform for students, researchers, faculty, and industry experts to discuss research breakthroughs and challenges—especially concerning the creation, management, and monetization of IP assets. The Cell promotes awareness of intellectual property and its impact on both startup ecosystems and established economies within academia.


Objectives

The major objectives of OPJU IPR cell are:
  • To create awareness about IPR among students and faculty.
  • To conduct workshops, seminars, and training sessions on IPR.
  • To promote a deeper understanding of IPR and encourage IP identification.
  • To provide training on IPR filing processes and future activities.
  • To implement the university’s IPR policy on campus.
  • To disseminate IPR knowledge to different sections of society.
  • To provide consultancy and assist with technology patenting.
  • To offer UG, PG, and Ph.D.-level courses that raise community-level IP awareness.

Activities

1. Center of Research Excellence (CRE) & IIC OPJU, in association with CGCOST, organized a webinar titled “INTELLECTUAL PROPERTY RIGHTS AND ITS SCOPE” on May 29, 2021, at 3:00 PM.

Speaker: Dr. Amit Dubey, Scientist 'D', CLF and IPRC, CGCOST.

2. IQAC & IIC OPJU Raigarh organized a webinar on “AWARENESS IN IPR” on January 12, 2021, at 4:00 PM.

Speaker: Advocate Sandhya Thakkar (Maniyar), LLM (Australia).

3. OPJU-IIC, in collaboration with MIC, conducted an “Orientation Session on NISP & IPR” on Jan 7, 2021, at 4:00 PM.

Speaker: Dr. P. Chandrakumar, Vel-Tech Institute, Chennai.

4. Webinar on “Identifying Intellectual Property Components at Early Stage of Innovation” held on Jan 30, 2021, at 4:00 PM.

Speaker: Dr. D. R. Peshwe, VNIT Nagpur.


List of Intellectual Property of OPJU


Frequently Asked Questions

What is a Patent?

A patent is a statutory right for an invention granted for a limited time by the government. It allows the patentee to exclude others from making, using, or selling the invention without consent, in exchange for full disclosure.

Does Indian Patent give protection worldwide?

No, patent rights are territorial. An Indian patent provides protection only within India. However, filing in India allows the applicant to file corresponding applications in convention countries within 12 months to obtain international protection.

Is it possible to file an international application under the Patent Cooperation Treaty (PCT) in India?

Yes, it is possible to file an international application—known as a PCT application—in India at the Patent Offices located in Kolkata, Chennai, Mumbai, and Delhi. All these offices act as Receiving Offices (RO) for international applications. The addresses of these offices are available on the official website of the Controller General of Patents, Designs, and Trademarks: www.ipindia.nic.in.

What can be patented?

An invention relating to a product or a process that is new, involves an inventive step, and is capable of industrial application can be patented. However, it must not fall under the categories of non-patentable inventions as defined in Sections 3 and 4 of the Patents Act, 1970.

Who can apply for a patent?

A patent application can be filed by the true and first inventor or their assignee, either alone or jointly with others. Additionally, the legal representative of a deceased inventor is also eligible to file a patent application.

How can I apply for a patent?

A patent application can be filed with the Indian Patent Office either with a complete specification or a provisional specification along with the prescribed fee (as per Schedule I). If the application is filed with a provisional specification, the complete specification must be submitted within 12 months from the date of filing. This deadline is non-extendable.

Is there a provision for filing patent applications electronically?

Yes, since July 20, 2007, the Indian Patent Office has implemented an online filing system for patent applications. More details about the electronic filing process are available on the official website: www.ipindia.nic.in. This system is also available for filing trademark applications.

What are the criteria for patentability?

For an invention to be patentable, it must meet the following criteria:

  1. It must be novel.
  2. It must involve an inventive step (i.e., it must be non-obvious).
  3. It must be capable of industrial application.
  4. It must not fall within the exclusions listed under Sections 3 and 4 of the Patents Act, 1970.
Should a patent application be filed before or after the publication of the invention?

A patent application should be filed before any publication or disclosure of the invention. Premature disclosure may compromise the novelty of the invention, rendering it unpatentable. However, under certain circumstances, a grace period of 12 months is available for filing a patent application after publication.


CIF Working Hours

CIF is open for testing on all working days from 9:15 AM to 6:30 PM. During university holidays, the facility remains closed. Fourth and Fifth Saturdays are reserved for maintenance. The sample submission time is from 9:15 AM to 11:00 AM, and collection is from 4:00 PM to 5:30 PM.


IPR Cell Coordinators

Dr. Sandeep Biswal
Dr. Sandeep Biswal

Associate Professor
Department of Electrical Engineering

Dr. Makkuva Kalyan Phani
Dr. Satish Kanhed

Assistant Professor
Department of Mechanical Engineering