OP Jindal University
Punjipathra, Raigarh, (C.G.), PIN:496109
Tel: 07767-254000
Email: info@opju.ac.in
OP Jindal University (OPJU), established by the Jindal Education and Welfare Society, is committed to delivering a high-quality education through a world-class curriculum, innovative teaching methods, and dedicated faculty. The University is deeply devoted to sustainability and responsible environmental stewardship, evident in its efforts to create an eco-friendly campus. The Green Campus Initiative, guided by a well-defined vision and mission, addresses global challenges such as climate change, biodiversity loss, and waste management. Its primary mission is to expedite the achievement of Sustainable Development Goals at all levels. We will outline the core objectives of the Green Campus Initiative, shedding light on the university's vision, mission, and the significance of this endeavor.
O. P. Jindal University thrives to emerge as a green and sustainable campus, which not only works on the creating an environment of clean and green in the campus but also actively participates in constructing a sustainable society through its commitment to education, research, community engagement, and the evolution of its physical environment. It transcends being merely ecologically responsible; its core mission includes addressing societal challenges through integrated education and research initiatives and fostering harmonious campus development in sync with its local surroundings. In essence, it signifies a holistic dedication to enhancing the welfare of individuals through pragmatic and diverse means.
OP Jindal University is dedicated to the pursuit of the United Nations (UN) Sustainable Development Goals (SDGs), encompassing 17 vital objectives. Our unwavering commitment to these global targets extends to our firm belief that our collective endeavors hold the potential to make a profound impact at local and regional levels.
Our mission is firmly rooted in a commitment to reduce our carbon footprint, curtail energy consumption, enhance waste management, and transform our university campus into a greener, more sustainable environment. As the world advances technologically and continues its journey of development, the depletion of our natural resources becomes increasingly apparent.
At OP Jindal University, we have wholeheartedly pledged ourselves to fostering a future that is not only sustainable but also equitable and bountiful for all. Empowered with the ability to catalyze positive change in society, we believe that the projects and initiatives we embark upon will not only benefit the broader community but also enlighten our students. These students, equipped with the knowledge and values of sustainability, will carry forth these principles into their individual capacities, furthering the cause of a sustainable future.
OP Jindal University is unwavering in its commitment to advancing sustainability through education and research, recognizing that knowledge and innovation are key drivers in addressing pressing global environmental challenges.
In the realm of education, the university offers a range of sustainability-focused academic programs, including environmental science, renewable energy engineering, sustainable business management, and more. These programs equip
students with the knowledge and skills needed to tackle sustainability issues in their future careers.
Moreover, the university promotes interdisciplinary learning, encouraging students from various disciplines to engage with sustainability concepts, ensuring a holistic approach to the subject.
Research is a cornerstone of OP Jindal University's sustainability initiatives. The institution actively supports sustainability research through dedicated centers and projects. Faculty and students engage in groundbreaking research
on renewable energy, biodiversity conservation, climate change mitigation, and sustainable development.
The university collaborates with industry partners, government agencies, and environmental organizations to drive research and development in the sustainability domain. By fostering a culture of innovation and discovery, OP Jindal
University plays a pivotal role in generating actionable insights and solutions that have a tangible impact on sustainability, both locally and globally.
Overall, OP Jindal University's commitment to education and research in sustainability is vital in shaping the next generation of environmentally conscious leaders and driving positive change towards a more sustainable future.
Sr. No. | Publications |
---|---|
1 | Pandey, K. K., Kumar, S., Jain, P., & Kumar, U. (2023). Design and development of a nano drone–A real time UAV. Materials Today: Proceedings. |
2 | Kumar, S., & Parhi, D. R. (2023, September). Trajectory exploration of K-III robot employing modified wind driven algorithm. In AIP Conference Proceedings (Vol. 2888, No. 1). AIP Publishing. |
3 | A. Majumder, M. Kalyan Phani, Green Steel Technology: A viable approach for sustainable world, Proceedings of METCENT 2023, IIT BHU, 26-28 October, Varanasi, India, 2023, pp 366-374. |
4 | D. Narsimhachary, M. Kalyan Phani, Additive Manufacturing: Environmental Impact, and Future Perspective, Book: Practical Implementations of Additive Manufacturing Technologies, Springer Nature ISBN 978-981-99-5948-8, 2023 |
5 | Kumar, S., Dadas, S. S., & Parhi, D. R. (2022). Path planning of mobile robot using modified DAYKUN-BIP virtual target displacement method in static environments. Wireless Personal Communications, 1-19. |
6 | Dhal, I. K., Kumar, S., & Parhi, D. R. (2022). Modified invasive weed optimization-based path exploration for mobile robot. International Journal of Intelligent Unmanned Systems, (ahead-of-print). |
7 | Kumar, S., Parhi, D. R., & Muni, M. K. (2022). Path planning and obstacle avoidance of multi-robotic system in static and dynamic environments. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 09544054221130386. |
8 | Choudhary, T., Sahu, M. K., & Verma, T. N. (2022). Solid oxide fuel cell integrated blade cooled gas turbine hybrid power cycle. In Hybrid Power Cycle Arrangements for Lower Emissions (pp. 135-165). CRC Press. |
9 | Kumar, S., & Parhia, D. R. (2023). Multi-target trajectory planning and control technique for autonomous navigation of multiple robots. ISA Transactions. |
10 | A. M. Rawani, Mithilesh Kumar Sahu, Siddharth S. Chakarabarti, Ajit Kumar Singh (2023). Sustainable Approaches and Strategies for E-Waste Management and Utilization. DOI: 10.4018/978-1-6684-7573-7 |
11 | Gautam, A., Sharma, A., Singh, R. S., & Gautam, P. (2022). Impact of Post-Processing Technologies in Additive Manufacturing for Aerospace Applications–A review. Iranian Journal of Chemistry and Chemical Engineering. |
12 | Arun Kumar Singh, Ram Sevak Singh, Anar Singh (2022). Emerging Two Dimensional Materials and Applications. CRC Press, Taylor & Francis Group. ISBN: 9781003247890. DOI: https://doi.org/10.1201/9781003247890 |
13 | Dhahiya, R. et al. (2022). Role of 2D Materials in Environmental Monitoring, pp. 195-216. CRC Press. DOI: 10.1201/9781003247890-10 |
14 | AK Singh, RS Singh, A Singh (2023). Overview of 2D Materials pp. 1-6. CRC Press. DOI: 10.1201/9781003247890-1 |
15 | Singh, R. S. (2023). CO₂ Capture by Metal-Decorated Silicon Carbide Nanotubes. Silicon, 1-11. |
16 | Verma, P., Verma, S., & Rao, G. V. V. J. (2023). A NEW NTRU CRYPTOSYSTEM WITH BLOCK MATRIX FORMULATION. Eur. Chem. Bull., 12(Special Issue 5), 3471–3474. |
17 | Singh, R. S. et al. (2023). Modeling and Simulation of Thin Film InP/GaAs Dual Junction Solar Cells. Iranian Journal of Chemistry and Chemical Engineering. DOI: 10.30492/IJCCE.2023.563052.5625 |
18 | Mishra, G. C., Verma, U. K., Dhoble, S. J. (2023). Lyoluminescence study of γ-ray irradiated Cu doped YCa₄O(BO₃)₃ microcrystalline phosphors for Radiation Dosimetry applications. |
19 | Singh, P. et al. (2023). Tribological Performance Evaluation of Greases on a Four-Ball Tester with Graphene Oxide Nanoparticles. ACS Omega. |
20 | Verma, N. K., & Sharma, A. (2022). Surface Coatings and Functionalization Strategies for Corrosion Mitigation. American Chemical Society (ACS), Chapter 14, pp. 291-316. |
21 | K. Varun Kumar, Kalyan Phani (2022). Microstructural and mechanical characterization of WC-NiCr weld overlay. Materials Today: Proceedings, 67(4), 501-506. |
22 | Jha, R., Patra, P. K., & Srivastava, A. K. (2022). AI-guided optimization of manufacturing protocols for AHSS coils. Materials and Manufacturing Process. DOI: 10.1080/10426914.2022.2105871 |
23 | Appala Raju, B. et al. (2022). Sustainable Solid Waste Management by Indian Steel Plants: A Review. IJEP, 42(8), 909-919. |
24 | Acharjee, N. et al. (2023). Review of Ceramic Pigment Preparation for Applications. Journal of the Australian Ceramic Society, 59(2), 303-323. |
25 | Kumar, N. et al. (2023). Anisotropy Control of Additive Manufactured Ti-6Al-4V Alloy for Aircraft Components. JOM, 1-15. |
26 | Biswas, P. et al. (2023). Production of Al–Cu binary alloy via novel continuous casting. International Journal of Materials Research, 114(4-5), 368-377. |
27 | Biswas, P. et al. (2023). Design and validation of novel continuous casting equipment. World Journal of Engineering. |
28 | Akeshwar Singh Yadav, Nitin Kumar, Gaurav Mahendru, Guru Prakash, S. K Nath, Erosive Wear of Low Temperature Nitrided 13/4 MSS for Hydro-turbine Application, Conference Proceeding: Springer nature Singapore. |
29 | B. Appala Raju, KVKS Prakash, M. Kalyan Phani, DRI (Direct Reduced Iron) Accretion To Replace Iron Ore And Quartz Consumption In The Production Of Silico-Manganese, AIP Conference Proceedings, (Accepted and in Press) |
30 | Gupta, S., Priyanka, & Kumar, S. (2023). Evaluating E-leadership Self-efficacy Through Social Media Efficacy and Participation. Management and Labour Studies, 0258042X231167307. |
31 | Sandeep Biswal, et. al., Impedance based directional relaying for smart power networks integrating with converter interfaced photovoltaic plants. Electric Power Systems Research, vol. 213, 2022. |
32 | Ankireddy Narendra et. al. Isolated Bidirectional Dual Active Bridge (DAB) Converter for Photovoltaic System- An Overview in Technological Challenges and Advances in Wind and Solar Energy Applications. CRC Press, 2023/2/13 |
33 | Ankireddy Narendra et. al. An Artificial Intelligence based Standalone Solar Photovoltaic Maximum Power Point Tracking System, presented at ERSEM-2023 organized by SRIT, Andhra Pradesh. |
34 | Ankireddy Narendra et. al. Remodeling and Simulation of Isolated Photo-Voltaic System interfacing Induction Motor with Aggravate & Observe MPPT, presented at ERSEM-2023 organized by SRIT, Andhra Pradesh. |
35 | G. M. Rao et. al. Novel Technology development for High Power Vehicle Charging using Multiple Stage IPT System, 2022 OPJU International Technology Conference on Emerging Technologies for Sustainable Development (OTCON), DOI: 10.1109/OTCON56053.2023.10113912 |
36 | Abhilasha Chaudhuri et.al. A Decision-making Framework Model for Replacement of Track Switch-point Changing Box using a Multiple Attribute Decision Making Method. 2022 OPJU International Technology Conference on Emerging Technologies for Sustainable Development (OTCON). |
37 | Abhilasha Chaudhuri et.al. An Effective Feature Selection Technique for detecting Parkinson’s Disease using Binary Whale Optimization Algorithm. 2023 IEEE World Conference on Applied Intelligence and Computing (AIC 2023) |
38 | Amit Jain et.al. Analysis Of Optimum Cost And Size Of The Hybrid Power Generation System Using Optimization Technique, IEEE International Conference on Communication, Systems and Network Technologies. |
39 | Arti Vaish et.al. ML-based Anomalies Detection in Wireless Network Link Layer of the Internet of Things (IoT) 2023 5th International Congress on Human-Computer Interaction, Optimization and Robotic Applications (HORA) |
40 | Arti Vaish et.al. On some classical and quantum mechanical aspects of light in an optical fiber. J Opt (2023). https://doi.org/10.1007/s12596-023-01207-9 |
41 | Arti Vaish et.al. Comparative Analysis of big data analytics in cloud computing. 12th International Conference on Soft Computing for Problem Solving - SocProS 2023 |
42 | Arti Vaish et.al. A Lightweight Encryption Method for Preserving E-Health Care Data Privacy Using Dual Signature on Twisted Edwards Curves. IC3T-2023 conference |
43 | Asimkiran Dandapat et.al. Machine Learning and Deep Learning based Stock Market Prediction considering Covid-19 as a Feature. 2022 OPJU International Technology Conference on Emerging Technologies for Sustainable Development (OTCON), DOI: 10.1109/OTCON56053.2023.10114020 |
44 | Bhupesh Kumar Dewangan et.al. A comparison of feature selection approaches for liver disease data. 2022 OPJU International Technology Conference on Emerging Technologies for Sustainable Development (OTCON) |
45 | Bhupesh Dewangan et.al. Machine learning security algorithms and framework for IoT system. 2022 OPJU International Technology Conference on Emerging Technologies for Sustainable Development (OTCON) |
46 | Bhupesh Kumar Dewangan et.al. Route Optimization for Waste Collection. https://doi.org/10.1007/978-981-19-4193-1_59 |
47 | Bhupesh Kumar Dewangan et.al. Preventive measurement and Prediction of Covid-19 in India through Business Intelligence Tools. https://ieeexplore.ieee.org/document/9932765 |
48 | Bhupesh Kumar Dewangan et.al. Continuous Hand Gesture Segmentation and Recognition of Hand motion trajectory gestures for novel input interfaces. International Journal of Reconfigurable and Embedded Systems (IJRES) |
49 | Bhupesh Kumar Dewangan et.al. Analysis of Deep Learning Methods for Healthcare Sector - Medical Imaging Disease Detection. Contemporary Mathematics, 2023 |
50 | Princy Diwan et.al. Ensuring data protection using machine learning integrating with blockchain technology. Lecture notes in networks and systems, Springer. 12th International Conference on Soft Computing for Problem Solving - SocProS 2023 |
51 | Rakesh Nayak, et.al. Artificial Intelligence Techniques for Detection as Well as Diagnosis of Cancer and Prediction of Mutations, NeuroQuantology, OCTOBER 2022, VOLUME 20, ISSUE 12, PAGE 231-238. DOI: 10.14704/NQ.2022.20.12.NQ77019 |
52 | Rakesh Nayak et.al. Generic View of Sentiment Analysis Using Machine Leaning Models, 2022 Opju IEEE International Technology Conference (OTCON 2.0). DOI: 10.1109/OTCON56053.2023.10113967 |
53 | Rakesh Nayak et.al. Hybrid Recommendation System with Enhanced Generalized Sequential Pattern Algorithm for E-Learning System, 2022 Opju IEEE International Technology Conference (OTCON 2.0). DOI: 10.1109/OTCON56053.2023.10114040 |
54 | Rakesh Nayak et.al. ESTIMATION OF POWER CONSUMPTION PREDICTION OF ELECTRICITY USING MACHINE LEARNING, 4th EAI International Conference on Cognitive Computing and Cyber Physical Systems (IC4S 2023) |
55 | Rakesh Nayak et.al. A Case Study on Intelligent Engineering Applications for Sustainability Using AI and ML Approaches, 2023 |
56 | Saroj Kumar Chandra et.al. Heart Disease Detection and Classification using Machine Learning Models. In: Singh, P., Singh, D., Tiwari, V., Misra, S. (eds) Machine Learning and Computational Intelligence Techniques for Data Engineering, MISP 2022, Lecture Notes in Electrical Engineering, vol 998, Springer, Singapore. DOI Link |
57 | Saroj Kumar Chandra et.al. Industry 4.0 based Machine Learning Models for Anomalous Product Detection and Classification, 2022 OPJU International Technology Conference (OTCON), Raigarh, Chhattisgarh, India, 2023. DOI: 10.1109/OTCON56053.2023.10114045 |
58 | Saroj Kumar Chandra et.al. Efficient Machine Learning Model For Covid-19 Spread Prediction, 2022 OPJU International Technology Conference (OTCON), Raigarh, Chhattisgarh, India, 2023. DOI: 10.1109/OTCON56053.2023.10113986 |
59 | Saroj Kumar Chandra et.al. Heart Disease Prediction and Classification Using Machine Learning Models. In: Kumar Singh, K., Bajpai, M.K., Sheikh Akbari, A. (eds) Machine Vision and Augmented Intelligence, Lecture Notes in Electrical Engineering, vol 1007, Springer, Singapore. DOI Link |
60 | Saroj Kumar Chandra et.al. Hybrid Image Captioning Model, 2022 OPJU International Technology Conference on Emerging Technologies for Sustainable Development (OTCON), Raigarh, Chhattisgarh, India, 2023. DOI: 10.1109/OTCON56053.2023.10113957 |
61 | Saroj Kumar Chandra et.al. Sentiment Analysis for Depression Detection and Suicide Prevention Using Machine Learning Models. In: Garg, L., et al. Key Digital Trends Shaping the Future of Information and Management Science, ISMS 2022, Lecture Notes in Networks and Systems, vol 671, Springer, Cham. DOI Link |
62 | Saroj Kumar Chandra et.al. Efficient Machine Learning and Factional Calculus based Mathematical Model for Early COVID, Human-Centric Intelligent Systems, 2023 |
63 | Siddharth Chakrabarti, Review on Nanoporous inorganic desiccant materials in the context of application in rotary dehumidifiers, Materials Today: Proceedings, January 2022 |
64 | Siddharth Chakrabarti, Performance Analysis of Desiccant Material Prepared by Simple Mixing of Silica Gel and Calcium Chloride, Recent Advances in Mechanical Infrastructure, Springer Publications, Jan 2022, 116, 3-15 |
65 | Siddharth Chakrabarti, Parameters influencing the performance of fluidized bed: A review on thermo-hydraulic properties, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 1-34, 2021 |
66 | Mithilesh Sahu, Exergo-Economic Analysis and Optimization of Cooled CGAM Cycle: A Gas Turbine Based Co-generation Cycle, International Journal of Engine Research |
67 | Saroj K. Chandra, CNN Based Architecture for Automatically Detecting Peoples without Face Mask, 2021 Emerging Trends in Industry 4.0 (ETI 4.0), IEEE, pp. 1-6 |
68 | Saroj Chandra, Neural Network Prediction of Slurry Erosion Wear of Ni-WC Coated Stainless Steel 420, Metals Journal |
69 | Bhupesh Dewangan, Multi-Criteria Decision-Making Methodology for Sustainable Creativity in Social Media, Journal of Computer Science, Volume 17 No. 11, 2021, 1128-1137 |
70 | Bhupesh Dewangan, Analysis of Blockchain Security Applications in Electronic Health Records Standardization, Recent Advances in Computer Science and Communications (SCOPUS and EBSICO) |
71 | Bhupesh Dewangan, Improving software performance by automatic test cases through genetic algorithm, International Journal of Computer Applications in Technology, 2022 |
72 | Bhupesh Dewangan, Multi-View Deep Convolution Neural Network for Automatic Target Recognition and Classification of Synthetic Aperture Radar Image, Journal of Advances in Information Technology, 13(5) |
73 | Abhilasha Chaudhuri, Binary Jaya Algorithm based on Dice Similarity for Cancer Classification using Microarray Dataset, 2022 IEEE World Conference on Applied Intelligence and Computing (AIC 2022), IEEE Xplore |
74 | Sandeep Biswal, Taylor series based protection starting element for STATCOM compensated transmission line, Electric Power Systems Research, 204, 107700, 2021 |
75 | Sandeep Biswal, Quadri, I. A, D. Singh, A Time-Frequency Algorithm for CT Saturation Detection in the Presence of Noise, 2021 Emerging Trends in Industry 4.0 (ETI 4.0), IEEE, pp. 1-5 |
76 | Sandeep Biswal, Synchronous Generator Out-of-Step Protection Based on Savitzky-Golay Filtering Technique, In 2021 Emerging Trends in Industry 4.0 (ETI 4.0) (pp. 1-3). IEEE. |
77 | Sandeep Biswal, Impedance Based Directional Relaying For Smart Power Networks Integrating With Converter Interfaced Photovoltaic Plants, Electric Power Systems Research |
78 | G.M. Rao, Designing of Neuro-Fuzzy Controllers for Brushless DC Motor Drives Operating with Multiswitch Three-Phase Topology, Journal of Electrical and Computer Engineering, 2022 |
79 | Patidar, R. D., A Secure ECG based Smart Authentication Scheme for IoT Devices, IEEE Explore |
80 | R.D. Patidar, Sandeep Biswal, Intrinsic Time Decomposition Based Differential Protection with Adaptive Threshold for UPFC Compensated Transmission Line, International Journal of Emerging Electric Power Systems (IJEEPS) |
81 | R.D. Patidar, S.D. Swain, Parameter optimization of PV integrated shunt active power filter with taguchi SNR, International Journal of Emerging electric Power systems, 2022 |
82 | R.D. Patidar, S.D. Swain, SAPF Parameter optimization with the application of Taguchi SNR methods, Electronics, 2022 |
83 | R.D. Patidar, S.D. Swain, Adative controller based shunt active power filter for power quality enhancement in grid integrated PV systems, Microgrid Cyber Physical Systems, 2022 |
84 | Deepak Singh, Improved Block Matching Motion Estimation Technique using Modified Particle Swarm Optimization in Video Coding, In 2021 Emerging Trends in Industry 4.0 (ETI 4.0) (pp. 1-6). IEEE. |
85 | Quadri, I., Patidar, R. D., Optimal Allocation of Capacitor and SVC in Radial Distribution System to reduce power loss and Operational Cost, In 2021 Emerging Trends in Industry 4.0 (ETI 4.0) (pp. 1-6). IEEE. |
86 | Pushpanjali Shadangi, Swain, S. D., Experimental verification of DSTATCOM for various non-linear load, International Journal of Emerging Electric Power Systems, 2021 |
87 | Pushpanjali Shadangi, Swain, S. D., Space Vector Pulse Width Modulation-Based DSTATCOM for harmonic compensation, Sustainable Energy and Technological Advancements pp 209–219 |
88 | M. Kalyan Phani, Microstructural and mechanical characterization of parallel layered WC- NiCr weld overlay on 080 M40 steel substrate prepared using additive manufacturing, Materials Today: Proceedings, 2022 |
89 | M. Kalyan Phani, Towards Sustainable Solid Wastes Management by Indian Integrated Steel Plants: A comprehensive review, Indian Journal of Environment Protection, 2022 (ISSN: 0253–7141), 2022 |
90 | S. Das, An Innovative Process for Synthesizing Mg-Al alloy- Based Composites, Metallography, Microstructure, and Analysis (Springer) |
91 | Neeraj Verma, Advanced metal and carbon nanostructures for medical, drug delivery and bio-imaging applications, Journal of Nanoscale, 2022 |
92 | Neeraj Verma, A novel reduction approach for fabrication of transparent conducting fluorine and tin doped indium oxide thin film with low sheet resistance, Journal of Ceramics International, 2022 |
93 | Neeraj Kumar, Recent Trends in Noble Metal Nanoparticles for Colorimetric Chemical Sensing and Micro-Electronic Packaging Applications. Metals 2021, 11, 329. |
94 | Rajesh Jha, AI-guided Optimization of Manufacturing Protocols for AHSS Coils, Materials and Manufacturing Processes, 2022 |
95 | Rajesh Jha, AHSS application in Industry 4.0: Determination of optimum processing parameters during coiling process through un supervisied Machine Learning approach, Materials Today communications |
96 | Girish Mishra, R.S. Singh, Enhanced luminescence in co-doped LaCa4O(BO3)3 phosphor: Photoluminescence, Mechanoluminescence and Thermoluminescence study, Optik: International Journal for Light and Electrons Optics (Elsevier) |
97 | Girish Mishra, Improvement of self-activated luminescence properties of Ca2KZn2(VO4)3 down-conversion materials by SSR method based on co-doped Eu3+,Dy3+ rare earth ions concentrations, Journal of Molecular Structure |
98 | R.S. Singh, Sulfur-doped silicon carbide nanotube as a sensor for detecting liquefied petroleum gas at room temperature, Diamond and Related Materials 124 (2022): 108932. |
99 | R. S. Singh, Shellac derived graphene on solid, flexible, and porous substrates for high performance bipolar plates and supercapacitor electrodes, Renewable Energy (Elsevier), 2022 |
100 | R.S. Singh, Engineering the Electronic Structure in Titanium Dioxide via Scandium Doping Based on Density Functional Theory Approach for the Photocatalysis and Photovoltaic Applications, Iranian Journal of Chemistry and Chemical Engineering, 2022 |
101 | R.S. Singh, Recent Developments in Chemical Doping of Graphene using Experimental Approaches and its Applications, Advanced Engineering Materials, 2022 |
102 | Manas Ranjan Mishra, Dynamics of heat absorbing and radiative hydromagnetic nanofluids through a stretching surface with chemical reaction and viscous dissipation , Journal of Process Mechanical Engineering, 2022 |
103 | K.N. Singh, Ferroelectric Relaxor Behavior and Dielectric Relaxation in Strontium Barium Niobate–A Lead-Free Relaxor Ceramic Material, Engineered Science, 2022 |
104 | Swati Verma, Management of the Oil and Gas Industry Using the Chameleon Hash Algorithm for Blockchain Technology, Neuro Quantology, 2022 |
105 | R.S. Singh, Nanomaterials-based biosensors, Advanced Nanomaterials for Point of Care Diagnosis and Therapy, 1st Edition - March 11, 2022 |
106 | Neeraj Verma, Surface Coatings and Functionalization Strategies for Corrosion Mitigation, Functionalized Nanomaterials for Corrosion Mitigation: Synthesis, Characterization, and Applications". This entire book was edited by a research group from New Jersey Institute of Technology (NJIT), USA, and KFUPM, Saudi Arabia., ACS e-book |
107 | Abhilasha Chaudari, Computational intelligence for healthcare, Next generation health care systems using soft computing techniques, CRC press, 2022 |
108 | Saroj K. Chandra, Three-Dimensional Fractional Operator for Benign Tumor Region Detection, Springer, Book Chapter, 2021 |
109 | Mithilesh Sahu, Hybrid Power Cycle Arrangements for Lower Emissions, Solid oxide fuel cell integrated blade cooled gas turbine hybrid power cycle, CRC press, 2022 |
110 | Anurag Vijayawargiya, Mahesh Bhiwapurkar, Effect of Lifting Height and Weight Magnitude on Biomechanical Loading During Manual Lifting, Technology Enabled Ergonomic Design. Springer, Singapore, 2022. 185-195. |
111 | Siddarth Chakrabarthy, Prediction of Global Solar radiation in India: Analysing the influence of variable input parameter (VIP) on the models output performance, International Journal of Ambient Energy, 2020 |
112 | Siddarth Chakrabarthy, Development of global solar radiation models: A comprehensive review and statistical analysis for Indian regions, Journal of Cleaner Production, 126208, 2021 |
113 | Siddarth Chakrabarthy, A systematic approach in power plant performance improvement through exergy analysis-A case study, International Journal of energy for clean environment |
114 | Manish Bhagwani, Review of temper detection: A way towards forensic investigation of tempered database |
115 | Sandeep Biswal, R.D. Patidar, S.D. Swain, An integrated wide area backup protection algorithm during stressed power system condition in presence of wind farm, Arabian Journal of Science and Engineering, 1-14, 2021 |
116 | Sandeep Biswal, R.D. Patidar , Kullback – Leibler divergence based differential protection scheme for shunt compensated transmission line, IET generation, transmission and distribution, 15(12), 1808-1819-2021 |
117 | Neeraj Kumar, M. Kalyan Phani,, A.K. Srivastava, Nanomaterials for advanced photovoltaic cells, Emerging Nanotechnologies for Renewable Energy, A volume in Micro and Nano Technologies, 2021 (Book Chapter) |
118 | A.K. Bhansali, Comparision of transmission control protocol variants for two way transfer and proposagration model with WiMAX network bandwidth asymmetry, 5th IEEE International Conference on recent advances and innovations in Engineering (ICRAIE), 1-5, 2020 |
119 | Diptimayee Swain, Artificial Intelligence applications in electrical transmission and distribution systems protection, CRC press, Taylor and Francis London, 2021 |
120 | Tanweer Ahmad, A Stochastic Fuzzy Multi-Criteria Group Decision-making for Sustainable Vendor Selection in Indian Petroleum Refining Sector, Benchmarking: An International Journal, 2021 |
Sl. No. | Title of Patent | Name of OPJU Patentee | File Number | Country of Patent Filing | Status |
---|---|---|---|---|---|
1 | Role of Women Entrepreneurship in Reduction of Social Norms for Sustainable Development | Dr. Shradha Gupta | - | INDIA | Published |
2 | Green Steel Technology: A viable approach for sustainable world | Dr. M Kalyan Phani | - | INDIA | Published |
3 | Performance Assessment of Different Sustainable Energy Systems Using Multiple-Criteria Decision-Making Model and Self-Organizing Maps | Dr. Umashankar Ghugar | - | INDIA | Published |
4 | Process for synthesis of Ce3+, Eu2+ co-doped basif6 phosphor | Dr. Girish Mishra | 201921035528 | INDIA | Granted |
5 | Steam generation device for steam turbine | Dr. Satish Kanhed, Dr. Siddharth Chakrabarti | 201921036338 | INDIA | Granted |
6 | A synthesis process of down-conversion ba3nala(po4)3f phosphor for enhancement in solar cell efficiency | Dr. Prashant Bokare | 2021106705 | AUSTRALIA | Granted |
7 | IoT based intelligent circuit driven automatic hands free umbrella | Dr. Ashok Bhansali, Dr. RD Patidar, Dr. Mahendra Shrivas, Prof. Pradeep Chauhan | 202121050004 | INDIA | Published |
8 | IoT and machine learning based smart poultry farm for healthy layer chicken using WSN advancements | Dr. Ajit Kumar Singh | 202221004571 | INDIA | Published |
9 | IoT, Machine Learning Based Surveillance Drones to Ensure the Safety and Cyber Security | Dr. Mukesh Desai, Dr. Mithilesh Sahu | 202241006974 | INDIA | Published |
10 | Intelligent street light on/off system based on the object detection | Dr. Rakesh Nayak (Non OPJU) | 20/2022/101/198 | GERMANY | Granted |
11 | A robotic technology to study the positive traits of silver nanoparticles on bacterial infections | Dr. Deepak Patel | 202241016038 | INDIA | Published |
12 | A process for fabricating aluminum, boron carbide-based aluminum matrix composites using powder metallurgy route | Prof. Neeraj Kumar | 2021101683 | AUSTRALIA | Granted |
13 | A tin silver-plating bath using methane sulfonate for low alpha solder bumping | Prof. Neeraj Kumar | 2021104459 | AUSTRALIA | Granted |
14 | Designing a nanostructured photovoltaics on solar panels to increase the efficiency of solar energy utilization | Dr. KN Singh | 202241039620 | INDIA | Published |
15 | A machine learning based approach to plot graphs based on statistical data analysis of patients suffering from cancer due to smoking | Dr. KN Singh | 202241018864 | INDIA | Published |
16 | A device for agglomeration of fines | Dr. Satish Kanhed, Dr. Trinath Talapaneni, Dr. Siddharth Chakrabarti | 2021/10662 | SOUTH AFRICA | Granted |
17 | A novel inclusive educational model for children with greater disabilities | Dr. Saurabh Gupta | 202221031673 | INDIA | Published |
18 | A System for Manufacturing Transparent Conductive Film | Prof. Neeraj Kumar | DE20/2021/105/684/U1 | GERMANY | Published |
19 | Effect of b-site disorder on the ferroelectric properties of BZT ceramics | Dr. KN Singh, Dr. Deepak Patel | 202221022529 | INDIA | Published |
20 | Device for effective generation and utilization of steam for steam turbine | Dr. Satish Kanhed, Dr. Siddharth Chakrabarti | 201921049004 | INDIA | Published |
21 | Welding with the help of microwave application | Dr. Satish Kanhed, Dr. Siddharth Chakrabarti | 201921049003 | INDIA | Published |
22 | Use of solar energy in sintering and hence welding of metal / ceramic powders | Dr. Satish Kanhed, Dr. Siddharth Chakrabarti | 201921049005 | INDIA | Published |
23 | Microwave assisted steel maker and converter (MASMAC) | Dr. Satish Kanhed, Dr. Siddharth Chakrabarti, Dr. Trinath Talapaneni | 202021047105 | INDIA | Published |
24 | Method and process for quick electric vehicle charging | Dr. Satish Kanhed | 202221002497 | INDIA | Published |
25 | Design develop and management of solar concentrator studded with optical fiber for daylighting | Dr. Satish Kanhed | 202221008802 | INDIA | Published |
26 | Wave motion on the surface of the human tympanic membrane and modeling analysis | Dr. Satish Kanhed | 202221021774 | INDIA | Published |
Multi-focal Concurrent Solar Heating System | Dr. Satish Kanhed, Dr. M. Kalyan Phani, Dr. Siddharth Chakrabarti, Dr. Ashok Srivastava | 202121056205 | INDIA | Published | |
A novel acoustic fluidized bed device for heat transfer application | Mr. Gabhane Mohit, phd Scholar, OPJU | 2021107426 | AUSTRALIA | Granted | |
Development of big data analytics for intelligent industrial manufacturing based on wireless and iot technology | Mr. Prateek Dighe, phd Scholar, OPJU | 202141041225 | INDIA | Published | |
Method of reducing resistance of transparent conducting thin films using novel chemical reduction | Prof. Neeraj Kumar | 2022/03893 | SOUTH AFRICA | Granted | |
A novel inclusive educational model for children with greater disabilities | Dr. Saurabh Gupta | 202221031673 | INDIA | Published | |
Iot based face mask and body temperature sensing device | Dr. Rakesh Nayak, Dr. Bhupesh Kumar Dewangan | 371116-001 | INDIA | Published | |
A method of preparation of silver dendrites using graphene electrodes | Dr. Ram Sevak Singh | 202221039611 | INDIA | Published | |
A novel sustainable cultivation method for ayurvedic herb lemongrass | Dr. Dipti Shukla | 2022/07836 | SOUTH AFRICA | Granted | |
Iot based Automatic detection and prevention of all types of leaf disease and other environmental factors using AI camera, WSN and Machine learning algorithms | Dr. Gulshan Soni | 202241070928 | INDIA | Published | |
AI and machine learning-based smart tractors, agribots and robotics for remote agricultural operations | Prof. Pushpanjali Shadangi | 202241067469 | INDIA | Published | |
Neural Networks System for tracking and controlling robots | Dr. Soumya Singh | 202211070739 | INDIA | Published | |
Smart traffic management system using artificial intelligence, internet of things (iot) and embedded with techniques of video processing | Dr. Deepak Singh | 202311000305 | INDIA | Published | |
Artificial Intelligence based Drone controlled Detection of Plant Disease | Dr. Amit Jain | 1199299 | Canada | ||
Systematic study to analyze the impact of discrete mathematics and probability in the theory of machine learning | Mr. Manas Ranjan Mishra | 202341003382 | INDIA | Published | |
Topic models system using neural networks | Dr. Gulshan Soni | 202311003249 | INDIA | Published | |
Building cooperative construction system based on artificial intelligence technology in building construction management system modelling | Dr. Anurag Sharma | 202331004058 | INDIA | Published | |
A rail cooling device for heat treatment of rails | Dr. Siddharth Chakrabarti, Dr. Satish Kanhed, Dr. Kalyan Phani, Dr. RD Patidar | 20 2022 107 235 | Germany | Granted | |
Techniques of green fabrication of stable lead free bismuth based perovskite solar cells using a non toxic solvent | Dr. K N Singh, Dr. Girish C Mishra | 202341003877 | INDIA | Published | |
Extraction process of Borassus blabellifer L. Leaf fine fiber | Prof. Jitesh Singh, Dr. Satish Kanhed | 2023/02070 | South Africa | Granted | |
Electric Vehicle Head Light Console | Dr. R D Patidar, Mr. Rakesh Patidar, Mr. Kapol Nashine | 379282-001 | INDIA | Published | |
Use of Smart Nanoparticles in Treatment of Breast Cancer | Dr. Anal Kant Jha | 202341007276 | INDIA | Published | |
A system for introducing controlled thread porosity by implementing a solder wire in a hydroxyapatite specimen | Dr. Siddharth Chakrabarti, Dr. Satish Kanhed, Dr. Kalyan Phani, Dr. RD Patidar | 20 2023 100 029 | Germany | Granted | |
Door handle with stress detection mechanism (design Patent) | Dr. Gulshan Soni | 376197-001 | INDIA | Published | |
Solar Power Charger | Dr. G. Madhusudhana Rao, Dr. R.D Patidar, Dr. Sushree Diptimayee Swain, Dr. Prasanta Kumar Jena | 379249-001 | INDIA | Published | |
Efficient deep image compression system with auto-encoders for different sub-band frequencies | Dr. Rakesh Patidar | 202241065491 | INDIA | Published | |
A method for making customer purchase decision | Dr. Jaya Prakash Rath and Dr. Saurabh Gupta | 202321007442 | Published | ||
A scientific image processing and machine learning based methodology for a particular focus on single particle reconstruction from transmission electron microscopy (TEM) images | Dr. Amit Jain | 1199160 | Canada | ||
Quality of services (qos) improvement system in software defined iot using deep optimal route neural network | Prof. Shashikant Kaushaley | 202241064833 | INDIA | Published | |
An iot based wind energy generation system and method thereof | Prof. Shashikant Kaushaley | 202241070477 | INDIA | Published | |
A system for providing cyber security by improved predictive potential of machine learning and method thereof | Prof. Shashikant Kaushaley | 202341001491 | INDIA | Published | |
Machine learning based approach to study the influence of earthquake parameters on the bidirectional behaviour of base isolation systems | Dr. Swapnasarit Kar | 202211072025 | INDIA | Published | |
Implementation of Artificial Intelligence and Blockchain integrated Billing Architecture for Charging of Electric Vehicles | Dr. Amit Jain | 202341006024 | INDIA | Published | |
The role of blockchain applications in supply chain management | Dr. Saket Jeswani | 202321008875 | INDIA | Published | |
Mouse with stress detection | Dr. Rakesh Nayak | 380667-001 | INDIA | Published | |
Smart Home Energy Management System Control through Deep Reinforcement Learning | Dr. Himanshu Vaishnav | 202341013222 | INDIA | Published | |
An artificial intelligence algorithmic approach to ethical decision-making in human resource management processes | Dr. Arti Vaish | 202311014382 | INDIA | Published | |
Application of linear algebra and partial derivatives to machine learning and artificial intelligence | Dr. Manas R. Mishra | 202341015521 | INDIA | Published | |
Machine Learning Based Approach to Study the Lead-Free Bismuth Based Perovskite Materials for Solar Cell Applications | Dr. Ankur Rastogi | 202311016895 | INDIA | Published | |
A novel iot based electrical induced abortion suction machine | Dr. Arti Vaish | 202311017171 | INDIA | Published | |
Water tank cooling refrigeration unit | Dr. Mukesh Desai | 381503-001 | Filed | ||
An iot based wind energy generation system and method thereof | Mr. Prasanta Kumar Jena | 202241070477 | INDIA | Published | |
A secure system to protect digital data using significant bit substitution | Mr. Prasanta Kumar Jena | 202241063781 | INDIA | Published | |
Underwater Smart Drone | Prof. Umashankar Pandey | 381482-001 | INDIA | Filed | |
Solar water distillation system | Dr. Siddharth Chakravarti | 380834-001 | INDIA | Published | |
Electric vehicle head light console | Dr RD Patidar, Dr G Madhusudhanarao, Dr Sushree Diptimayee, Mr Prashanta Kumar Jena, Shashikanth Kaushaley, Mr. Rakesh Patidar, Mr Kapol Nashine | 379282-001 | INDIA | Published | |
Solar power charger | 1. Dr RD Patidar, 2. Dr G madhusudhanarao, 3. Dr Sushree Diptimayee, 4. Mr Prashanta Kumar Jena, 5. Shashikanth Kaushaley, 6. Mr. Rakesh Patidar, 7. Mr Kapol Nashine | 379249-001 | INDIA | Published | |
Vibrational Alloy Mixing and Casting Machine | Dr. Vatsala Chaturvedi, Dr Deepak Patel | 387094-001 | INDIA | Under Process | |
Mouse with stress detection | Dr. Rakesh Nayak | 384231-001 | INDIA | Published | |
Water Tank with Refrigeration Unit | Dr. Mukesh Shyamkant Desai | 368188-001 | INDIA | Published | |
Solar Mobile Charger Stand | Dr. Amit Jain | 380272-001 | INDIA | Published | |
Railway Station Energy Managing Device | Dr. Mukesh Shamkant Desai | 363716-001 | INDIA | Under Process | |
Electrochemical Cell for Corrosion Testing | Prof. Neeraj Verma | 60303713 | UK | Granted | |
Method and System for Real-Time Image Recognition and Classification using Deep Learning and Artificial Intelligence | Prof. Shashikant Kaushaley | 202341029522 | India | Published | |
An Analytical Strategy for Enhancing the Work Environment Through the Use of Application Programming Interfaces and Human Resource Management Systems | Dr. Sanjay Singh | 202321028563 | India | Published | |
Educational Activities Among Students: A Pedagogical Model for Adaptive Quality Management | Dr. Sanjay Singh | 202321026672 | India | Published | |
Women Entrepreneurs’ Roles in India Growth of the Economy | Dr. Sanjay Singh | 202321014214 | India | Published | |
Human Resource Information System Training for Managers and Business Owners: A Pedagogical Framework | Dr. Sanjay Singh | 202321008835 | India | Published | |
A new way to predict the positive and negative emotional experiences of English language students and their teachers, as well as their levels of self-adequacy | Dr. Sanjay Singh | 202241075683 | India | Published | |
Machine learning based technique for retrieval of specialised vocabulary list from an original corpus of digital science resources for middle school learners | Dr. Sanjay Singh | 202241074548 | India | Published | |
Voice Assistant Device with Artificial Intelligence to Assist Visually Impaired person | Dr. Amit Jain | 6275489 | UK | Published | |
A study on ability enhancement and personality prediction of employees of an organisation using machine learning algorithms | Dr. Bhupendra Tripathi, Dr. Vikash Kumar | 202341026792 | India | Published |
Title of the Project | Faculty In-charge | Collaboration Agency |
---|---|---|
Controlled in-line cooling of Rails for sustainable transportation | Dr. M. K. Phani (Sr. Asso. Prof.), Department of Metallurgical Engineering | Rail mill and TSD, JSPL, Raigarh |
Use of Multifocal Concurrent Solar Heating System/ Alternative Source of heating in Metal Melting/Treating Process | Dr. Satish Kanhed, Prof. Akash Pandey, Dr. Umesh Vishwakarma, Dr. Siddharth S Chakrabarti, Dept. of Mechanical Engineering | NSPL, Raigarh |
Use of Multifocal Concurrent Solar/Microwave/Induction Heating System in Water Boiling Process for Steam Turbine | Dr. Satish Kanhed, Prof. Akash Pandey, Dr. Umesh Vishwakarma, Dr. Siddharth Chakrabarti, Dept. of Mechanical Engineering | Jindal Power Ltd. (JPL), Tamnar |
Utilization of Submerged Arc Furnace Slag | Dr. Trinath Talapaneni, Dr. S. Das, Dept. of Metallurgical Engineering | SAF, JSPL, Raigarh |
Value added utilization of Fly Ash for sustainable solution | Dr. Sibnath Kayal, Dr. Trinath Talapaneni, Dr. S. Das, Dept. of Metallurgical Engineering | Plant No. 2, Jindal Power Ltd. (JPL), Tamnar |
Use of microwave for drying of wet coal fines | Dr. Satish Kanhed, Dr. Siddharth Chakrabarti, Dept. of Mechanical Engineering | NSPL, Raigarh |
Use of Multifocal Concurrent Solar Heating System/ Alternative Source of heating in Metal Melting/Treating Process | Dr. Satish Kanhed, Prof. Akash Pandey, Dr. Umesh Vishwakarma, Dr. Siddharth S Chakrabarti, Dept. of Mechanical Engineering | NSPL, Raigarh |
Use of Multifocal Concurrent Solar/Microwave/Induction Heating System in Water Boiling Process for Steam Turbine | Dr. Satish Kanhed, Prof. Akash Pandey, Dr. Umesh Vishwakarma, Dr. Siddharth Chakrabarti, Dept. of Mechanical Engineering | Jindal Power Ltd. (JPL), Tamnar |
Application of Water Sprinkler and Bent Chimnies for Air Pollution (Coal dust) Reduction | Dr. Satish Kanhed, Prof. Akash Pandey, Dr. Umesh Vishwakarma, Dept. of Mechanical Engineering | NSPL, Raigarh |
Design and Development of drone to minimize boiler inspection time | Dr. Mithilesh K. Sahu, Dr. Siddharth S Chakrabarti, Dept. of Mechanical Engineering | Jindal Power Ltd. (JPL), Tamnar |
Utilization of micro-fines generated in agglomeration process to enhance the plant productivity | Dr. M. Kalyan Phani, Sr. Assoc. Professor (Subject Matter Expert) | UGC STRIDE Project, Kazi Nazrul University |
O.P. Jindal University had taken several proactive initiatives in response to the COVID-19 pandemic. These initiatives aimed to safeguard the health and well-being of students, staff, and the wider community while ensuring continuity in education and research. Some special measures implemented include the following:
Transition to Online Learning: The university transitioned to online classes, ensuring that students could continue their education remotely. It became the first in Chhattisgarh and major parts of Central India to implement an online assessment system during the pandemic.
Safety Measures: Implementation of strict protocols such as mandatory mask-wearing, social distancing, and sanitization. WFH options and safety awareness sessions were organized for staff and faculty.
COVID Testing and Contact Tracing: Facilities for testing and tracing were provided to manage virus spread within the university community.
Mental Health Support: Mental wellness sessions were organized for faculty, students, parents, and the nearby community, with over 25 sessions conducted during the pandemic.
Research and Innovation: Faculty members published over 100 research articles and book chapters. More than 50 international conferences were attended virtually during this time.
OP Jindal University is committed to sustainability and environmental responsibility. It actively engages in sustainability audits such as energy, environment, and green audits to assess and improve its ecological footprint. Through these initiatives, the university identifies conservation opportunities, reduces waste, and promotes eco-friendly practices.
OPJU is unwavering in its commitment to mitigating its climate impact by actively working towards emissions reduction and energy conservation. These proactive strategies not only minimize OPJU's ecological footprint but also enhance the campus's ability to withstand climate-related challenges such as severe storms, flooding, and droughts.
OPJU’s greenhouse gas reduction program and energy conservation programs go hand in hand. Despite campus growth, OPJU has reduced energy use and greenhouse gas emissions per square foot significantly.
Some ways that OPJU continuously works to improve outdoor air quality on campus include:
Our campus offers abundant opportunities for students, faculty, and staff to actively participate in water conservation. Various initiatives are continuously underway to ensure the efficient and sustainable management of stormwater, enhance local water bodies, and reduce water consumption in classrooms, residence halls, and landscaping projects. These efforts empower our campus community to play a crucial role in preserving this precious resource.
OPJU is dedicated to fostering a sustainable transportation culture within the campus community. Students, faculty, and staff can easily access a network of bicycle and mixed-use paths, ensuring the convenience and safety of sustainable transportation methods. Embracing sustainable transportation not only offers cost savings but also contributes to energy conservation, promotes a healthy and active lifestyle, and plays a pivotal role in reducing carbon emissions.
Built in a lush green eco-friendly environment, OPJU has the best infrastructure in the state with an intellectually vibrant and stimulating environment.
OPJU takes pride in its construction practices, ensuring compliance with the approved building plan by the Department of Town and Country Planning. We've embraced sustainable methods, such as reusing excavated soil for backfilling and landscaping and utilizing treated water during the construction phase.
Moreover, our commitment to sustainability extends to the construction of our buildings. We've followed the Indian Green Building Council norms, which set forth stringent requirements for constructing both air-conditioned and non-air-conditioned spaces. This involves the use of appropriate thermal insulation materials to meet these standards.
In our campus construction, we prioritize eco-friendly practices, utilizing precast RCC, Fly Ash Bricks, and structural steel. Precast buildings offer numerous advantages, including lower pollution, minimal water usage compared to conventional construction, and a reduced environmental footprint. These practices reflect our dedication to both environmental responsibility and sustainable development.
The university's lighting system adheres to the 2007 Energy Conservation Building Code (ECBC) norms. Notably, our campus is illuminated by an energy-efficient LED lighting system in 90% of common areas, exemplifying our commitment to conserving energy. Furthermore, external street and garden lights are equipped with astronomical timers, ensuring precise on/off switching in accordance with sunset and sunrise timings. This approach not only enhances energy efficiency but also contributes to a more sustainable and eco-friendly campus environment.
Date: October 27, 2021
NSS, OPJU and School of Science jointly organized “CLEAN CLASSROOM CAMPAIGN’’ to create awareness about cleanliness and prevent the spread of Corona virus.
Date: December 13, 2021
Organized by NSS, OPJU in association with NTPC, Lara and IIC, OPJU, this meet aimed to create awareness about the need and importance of energy conservation. Various speakers and students made presentations on the topic.
Date: January 2, 2022
NSS and Centre for Social Empowerment organized a drive where 60 Ashoka saplings were planted to protect the environment and create awareness about a green environment.
Date: July 8, 2022
NSS & Centre for Social Empowerment, OPJU planted 100 plants at the adopted village school.
Date: July 13, 2022
NSS & Centre for Social Empowerment, OPJU planted 30 plants at the adopted village school.
Date: July 18, 2022
NSS & Centre for Social Empowerment, OPJU planted 70 plants at the adopted village school.
Date: July 29, 2022
NSS & Centre for Social Empowerment, OPJU planted 50 plants at the adopted village school.
Date: August 13, 2022
NSS & Centre for Social Empowerment, OPJU planted 25 plants at the adopted village school.
Date: August 17, 2022
NSS & Centre for Social Empowerment, OPJU planted 100 plants at the adopted village school.
Date: September 15, 2022
NSS & Centre for Social Empowerment, OPJU planted 25 plants at the adopted village school.
Date: November 7, 2022
NSS & CSE, OPJU organized a drive and planted 25 plants. A new initiative was announced to organize a plantation drive at the end of each month to celebrate employee birthdays.
Date: November 24, 2022
NSS and Centre for Social Empowerment organized a CLEAN CAMPUS DRIVE where 12 volunteers cleaned the campus.
Date: November 29, 2022
Another CLEAN CAMPUS DRIVE was organized with 12 volunteers.
Date: December 7, 2022
NSS volunteers organized a CLEAN CAMPUS DRIVE to clean the campus.
Date: December 10, 2022
On National Human Rights Day, NSS volunteers created awareness on biodegradable and non-biodegradable waste, the 5 R's, and waste management at Govt. High School, Samaruma.
Date: July 6, 2023
NSS OPJU celebrated Van Mahotsav Week by distributing saplings with flower pots to faculty and staff.
Date: August 1, 2023
NSS, OPJU planted 11 Amla, Lemon, and Mango plants at the school.
Date: October 31, 2023
A plantation drive was organized near the cricket ground as part of the "Adopt a Tree Scheme" and to felicitate employees with birthdays in September and October.
Date: November 7, 2023
The Department of Civil Engineering, NSS, and Centre for Social Empowerment celebrated Diwali with the children at the school and donated essential grocery items.
Dr. R. D. Patidar
Vice Chancellor,
Mentor
Ph.D., M. Tech, B.Tech
Experience:27 Years
vc@opju.ac.in
Dr. Siddharth Chakrabarti
Dean - SoE
Director-Sustainability
Ph.D., M.Tech., B.E.
Experience:22 Years
siddharth.chakrabarti@opju.ac.in
Dr. Makkuva Kalyan Phani
Assoc. Professor (Sr Grade), Metallurgical
Convener (Green Protocol & Waste Management)
Ph.D(HBNI-IGCAR, Kalpakkam), B.Tech
kalyan.makkuva@opju.ac.in
Dr. Sanjay Kumar Singh
Professor & Director - NSS
Advisor
Ph.D (Awadhesh Pratap Singh University, Rewa), M.A
sanjay.singh@opju.ac.in
Dr. Mahasakti Mahamaya
HoD, Civil Engineering
Convener (Green Campus Initiatives & ECO Club)
Ph.D(NIT, Rourkela), M.Tech, B.Tech
mahasakti.mahamaya@opju.ac.in
Dr. Taniya Sengupta Rathore
Assoc. Professor - SoS
Coordinator
Ph.D (Devi Ahilya University, Indore), M.Sc, B.Sc
taniya.rathore@opju.ac.in
Dr. Anurag Sharma
Asst. Professor, Civil
Coordinator (Eco-Club)
Ph.D(NIT Raipur), M.Tech, B.E
anurag.sharma@opju.ac.in
Dr. Sushree Diptimayee Swain
Assistant Professor (Sr. Grade),
Member
Ph.D (NIT Rourkela), M.Tech, B.E
sushree.dipti@opju.ac.in
Dr. Deepak Patel
Asst. Professor
Member
Ph.D (NIT, Raipur), M.Tech, BE
deepak.patel1@opju.ac.in
Ms. Namrata Ojha
Asst. Professor - SoM
Member
BCA, MBA(CSVTU, Bhilai)
namrata.ojha@opju.ac.in
Dr. Dharmender Singh Saini
Asst. Professor - Mechanical
Member
Ph.D (Pursuing), M.Tech ,B.E
dharmender.saini@opju.ac.in
Punjipathra, Raigarh, (C.G.), PIN:496109
Tel: 07767-254000
Email: info@opju.ac.in