Ph.D.(Mechanical Engineering) from National Institute of Technology, Raipur Chhattisgarh, India, December 2020
M.E. (Production Engineering), Dr. B. A. M. University, Aurangabad, M.S. India, Dec 2011.
B. E. (Production Engineering.), Shivaji University, Kolhapur, M.S. India, May 2004.
Diploma in Production Engineering from M.S.B.T.E., M.S. - 1999.
Work Experience
Working as an Associate Professor (Sr. Grade) in O. P. Jindal University, Raigarh (C.G), from June 2025 To till date
Worked as an Associate Professor in O. P. Jindal University, Raigarh (C.G), from April 2021 to May 2025
Worked as an Assistant Professor (Sr. Grade) in O. P. Jindal University, Raigarh (C.G), from Sept 2012 to April 2021.
Worked as an as an Assistant Professor in Deogiri Institute of Engineering & Management Studies, Aurangabad Maharashtra from July 2010 to Aug 2012.
Worked as a Lecturer in Marathwada Institute of Technology, Aurangabad Maharashtra from Mar 2006 to July 2010.
Worked as a Lecturer in College of Engineering, Osmanabad Maharashtra from Mar 2005 to Mar 2006.
Worked as a Costing Engineer in Dhoot Transmission Pvt. Ltd. Aurangabad Maharashtra from May 2004 to Feb 2005.
Worked as a Diploma Engineer in Dhoot Transmission Pvt. Ltd. Aurangabad Maharashtra from June 1999 to June 2001.
Research
Production and Industrial Engineering.
Setup Time Reduction and Productivity Improvement.
Reduction of Ambulance Response Time.
International National Journals
Desai, Mukesh Shyamkant., Rawani, A. M., Loya, M. I. M., Meshram, Sachin Akoj., & Desai, Preshit, Mangesh. 2023. “The Compatibility Gap Between the Steps of Single Minute Exchange of Die and Activities of Ambulance Response Time” Industrial Engineering Journal. Volume: 52, Issue 8, No. 5, August: 2023, ISSN: 0970-2555
Desai, Mukesh Shyamkant., Rawani, A. M., Loya, M. I. M. 2023. “Modified Single Minute Exchange of Die for the Reduction of Ambulance Response Time” Industrial Engineering Journal. Volume: 52, Issue 9, No. 2, September: 2023, ISSN: 0970-2555, pp 85-98.
Meshram, Sachin Akoj., Desai, Mukesh Shyamkant., Parve, Dinesh., & Swati, Ambadkar 2023. "Mathematical Modelling for The Cost of Quality: A Case of Steel Plant Activities" Industrial Engineering Journal. Volume: 52, Issue 9, No. 3, September: 2023, ISSN: 0970- 2555, pp 67-75.
Desai, Mukesh Shyamkant., Kirti Singh Yadav, S. S. Rathi "Application of Single Minute Exchange of Die for the Reduction of Loading Time of Auto-car in Railway Wagons" Vol. 12 - No. 7 (July 2022), International Journal of Engineering Research and Applications (IJERA), ISSN: 2248-962
Desai, Mukesh Shyamkant., R. M. Warkhedkar “Productivity Enhancement by Reducing Adjustment Time and Setup Change” International Journal of Mechanical & Industrial Engineering, Volume-1 Issue-1, 2011, pp - 37-42.
Desai, Mukesh Shyamkant, “Productivity Enhancement by Reducing Setup Time - SMED: A Case study in the Automobile Factory” Global Journal of Researches in Engineering, Volume 12 Issue 5 Version 1.0 ISSN: 2249-4596 Print ISSN:0975-5861,
Pankaj Kumar, Desai, Mukesh Shyamkant, Umesh Khandey, “Predicting flank wear of single point cutting tool using Taguchi approach”, OPJIT International Journal of Innovation & Research Volume-2 Issue-1, June 2013, ISSN 2319-4340
Pankaj Kumar, Desai, Mukesh Shyamkant, “Set Up Change Time Optimization Using Single Minute Exchange of Die (SMED) Methodology”, International Journal of Research in Electronics and Communication Technology (IJRECT 2015) Vol. 2, Issue 1 Jan. - Mar. 2015, ISSN : 2348 - 9065 (Online) ISSN : 2349 – 3143.
Desai, Mukesh Shyamkant, P S R K Nageswar Rao “Wind Energy Conversion Systems- Case Study” OPJIT International Journal of Innovation & Research Vol. - 03, No.-01, Page-43-47, Year-2014, ISSN 2319-4340
Desai, Mukesh Shyamkant, Mahesh Bhiwapurkar, “Design for Assembly” OPJIT International Journal of Innovation & Research Vol. - 03, No.-01, Page-06-09 Year-2014, ISSN 2319-4340
Mahesh Bhiwapurkar, Desai, Mukesh Shyamkant., Anurag Vijaywargiya, “Condition Monitoring of Rolling Element Bearing through Spectrum Analysis” OPJIT International Journal of Innovation & Research Vol. - 03, No.-01, Page-01-05 Year-2014, ISSN 2319-4340
Desai, Mukesh Shyamkant., A. M. Rawani “Productivity Improvement of Shaping Division of an Automobile Industry by Using Single Minute Exchange of Die (SMED) Methodology” ARPN Journal of Engineering and Applied Sciences. Scopus Index Journal, ISSN 1819-6608 Vol. - 12, No.-08, Page-2615-2629, April 2017.
Brijesh Kumar Verma, Desai, Mukesh Shyamkant., “Thermal Analysis of Boiler Tube using Finite Element Approach” International Journal for Scientific Research & Development, Vol. 6, Page no 399-402, Issue 04, 2018, ISSN, 2321-0613
Desai, Mukesh Shyamkant., A. M. Rawani and M. I. M. Loya “Reducing Ambulance Response Time in Emergency Medical Services: A Literature Review” International Journal of Mechanical Engineering and Technology (IJMET), Scopus Index Journal, Volume 10, Issue 10, October 2019, pp. 85-96 ISSN Print: 0976-6340 and ISSN Online: 0976-6359
Jayprakash Dansena, Desai, Mukesh Shyamkant., “Performance Analysis of Natural Draft Cooling Tower in Summer Season & Winter Season” International Research Journal of Engineering and Technology (IRJET), UGC Approved Journal, Volume: 08 Issue: 07, July 2021 pp 1029-1035, e-ISSN: 2395-0056,p-ISSN: 2395-0072
Satyam Purseth, Desai, Mukesh Shyamkant., “Performance Analysis and Efficiency Improvement of Boiler- A Review” International Journal of Engineering Applied Sciences and Technology, Vol. 5, Issue 12, July 2021, Pages 326-331, ISSN No. 2455-2143.
International National Conferences
V. V. Mane, Desai, Mukesh Shyamkant., “Analysis of Casting Defects and Prevention Actions for Quality Improvement of Casting Products” National Conference on Emerging Trends in Mechanical Engineering 2009, MIT Aurangabad, India.
Desai, Mukesh Shyamkant., “Wind Energy System: Theory, Design and Applications” International conference, Science engineering and Technology-04, 3 & 4 May 2012, VIT Vellore, Tamilnadu, India.
Desai, Mukesh Shyamkant., “An Application of Setup Time Reduction-SMED in the Automobile Industry” 3rd National Conference on Recent Advances in Manufacturing, 27-29 June 2012, SVNIT, Surat, Gujarat, India.
Desai, Mukesh Shyamkant., V. V. Mane “A critical study of casting defects and prevention actions for quality improvement of casting products” 2nd International conference ICMMPPA 9 & 10 January 2014 OPJIT Raigarh C.G. India.
Desai, Mukesh Shyamkant., Pankajkumar. J. M “Optimizing Adjustment Time and Setup Change Using Single Minute Exchange of Die (SMED) Methodology” 3rd International conference ICASPCT-2015, 14-16 January 2015 OPJIT Raigarh C.G. India.
Mahesh Bhiwapurkar, Desai, Mukesh Shyamkant., Anurag Vijaywargiya “Enhancement of Surface Finish Through Evaluation of Chip-Breaker” 1st International conference ICASPCT-2015, 14-16 January 2015 OPJIT Raigarh C.G. India.
Desai, Mukesh Shyamkant., L. R. Bhandarkar “Comparative Analysis of Temperature distribution of Drilling tool by Thermographs and Finite Element Method” 2nd International conference ICASPCT-2016, 17-19 March 2016 at OPJU Raigarh C.G. India.
Desai, Mukesh Shyamkant., L. R. Bhandarkar “Flexible Manufacturing System- The Revolution in Manufacturing Industry" 3rd International conference ICASPCT-2017, 22-23 March 2017 at Hotel Hyatt Raipur C.G. India.
Desai, Mukesh Shyamkant., N. R. Kodle "Tools in Process Industry Using -“Lean Manufacturing” 3rd International conference ICASPCT-2017, 22-23 March 2017 at Hotel Hyatt Raipur C.G. India.
Surendra Dwivedi, Desai, Mukesh Shyamkant., "Implementation of Lean Manufacturing for Improving Vendor Rating ", 3rd International conference ICASPCT-2017, 22-23 March 2017 at Hotel Hyatt Raipur C.G. India.
Sardar Singh Rathi, Desai, Mukesh Shyamkant., Mithilesh Kumar Sahu, Sanjeev Kumar. “SMED methodology implementation in rolling mill of the steel plant using a case study method”, 2nd Virtual International Conference on Innovation and Research in Science & Technology for Sustainable Development during 25-26 May 2023.
Prashant Kumar Sahu, Jitesh Kumar Singh, Desai, Mukesh Shyamkant., “Reducing Carbon Emissions in Basic Oxygen Furnace for Making Green Steel: A Comprehensive Review” Mechanical Engineering International Conference 1.0, During, 19-20 December, 2024 at OPJU Raigarh C.G. India.
Deepak Bhimrao Magar, Desai, Mukesh Shyamkant., “Integration of Smart Materials in Additive Manufacturing: Technological Challenges, Emerging Opportunities, and Future Prospects” Mechanical Engineering International Conference 1.0, During, 19-20 December, 2024 at OPJU Raigarh C.G. India.
Awards
Best Faculty of the year award for the Academic Year 2013-2014 at OP Jindal Institute of Technology Raigarh C.G.
Patents
Title of Patent: IoT Machine Learning Based Surveillance Drones to Ensure Safety and Cybersecurity, Application No: 202241006974, Date of Publication: 04/03/2022, Status: Published.
Title of Patent: Water Tank with Refrigeration Unit, Application No: 368188-001, Date of Publication: 13/07/2023, Status: Granted.
Title of Patent: Energy Managing Device, Application No: 393716-001, Date of Publication: 29/11/2023, Status: Granted.
Title of Patent: 360-Degree Dumping Trolley, Application No: 415258-001, Date of Publication: 05/07/2024, Status: Granted.
Title of Patent: Real-Time Brake Analyser, Application No: 421328-001, Date of Publication: 30/08/2024, Status: Granted.
Workshops
Organizing member of 32nd National Conference on Fluid Mechanics & Fluid Power at College of Engineering, Osmanabad, Maharashtra. During 3 to 5th March 2005.
Attended One-week Faculty Induction Training Programme on Effective Teaching Techniques at MIT, Aurangabad, Maharashtra. During 3 to 8th July 2006.
Attended International Conference on Engineering Design at Indian Institute of Science, Bangalore. During 9 to 11th August 2007.
Attended Three Days Faculty Development Programme on Engineering Drawing at MIT, Aurangabad, Maharashtra. During 4 to 6 February 2008.
Organizing member of National Conference on “Emerging Trends in Mechanical Engineering” at MIT, Aurangabad, Maharashtra. During 3 to 5 March 2009.
Attended One Week Faculty Development Programme on “Non-Conventional Energy” at MSBTE Pune, Maharashtra. During 1 to 7 August 2009.
Attended One Week Faculty Development Programme on “Alternative Energy Sources & Management” at Gramin Polytechnic, Nanded, Maharashtra. During 4 to 9 January 2009.
Attended and Presented Research paper in an International Conference on “Advanced Research in Mechanical Engineering” at Bhubaneswar, Odisha, India. During 6 to 10 June 2010.
Attended and Presented Research paper in an International Conference on “Science, Engineering & Technology” at VIT Vellore Tamil Nadu, India. During 3-4 May 2012.
Organizing member of International Conference on Innovation & Research for Sustainable Development at OPJIT Raigarh Chhattisgarh. During 1-3 November 2012.
Attended Two –Week ISTE Workshop On “Engineering Mechanics” under the National Mission on Education through ICT (MHRD, Govt. of India) at OPJIT Raigarh Chhattisgarh. During 26 November 2013 to 06 December 2013.
Organizing member of International Conference on “Metallurgical & Material Processes, Product & Applications” at OPJIT Raigarh Chhattisgarh. During 8-10 January 2014.
Attended Two –Week ISTE Workshop on “Fluid Mechanics” under the National Mission on Education through ICT (MHRD, Govt. of India) at OPJIT Raigarh Chhattisgarh. During 20-30 May 2014.
Organizing member of “Two days e-Seminar on Step 2 Research” Under the National Mission on Education through ICT (MHRD, Govt. of India) at OPJIT Raigarh Chhattisgarh. During 19-20 September 2014.
Attended One Week Short Term Training Programme on “Multicriteria Decision Making” at National Institute of Technology, Raipur, Chhattisgarh. During 25- 29 May 2015.
Attended One Week National Level Workshop on “Recent Development in Renewable Energy Technology” at O P Jindal University, Raigarh, Chhattisgarh. During 30 Nov – 5 Dec 2015.
Organizing member of 2nd International Conference on Advances in Steel, Power and Construction Technologies- 2016 at O P Jindal University, Raigarh Chhattisgarh. During 17 – 19 March 2016.
Attended One Week Short Term Training Programme on “Design of Experiments & Optimization Techniques” at DIEMS Aurangabad, Maharashtra. During 13-19 May 2016.
Attended One Day Workshop on “Managing Innovation, Eco-systems Reverse Innovation and Start-up enterprises” at National Institute of Technology, Raipur, Chhattisgarh. On 24 November 2016.
Organizing member of 3rd International Conference on Advances in Steel, Power and Construction Technologies- 2017 at O P Jindal University, Raigarh Chhattisgarh. During 22 – 23 March 2017.
Attended Industry – Academia Conclave – 2018 at O P Jindal University, Raigarh Chhattisgarh. During 12-13 April 2018.
Attended One Week Faculty Development Programme on “Use of ICT for Innovative Teaching Learning & Effective classroom Interaction” at DIEMS Aurangabad, Maharashtra. During 15– 19 June 2018.
Attended One week FDP on “Promoting Quality Culture in Technical Institutions” at AISSMS College of Engineering, Pune, during, 25th May to 29th May 2020,
Attended One-day workshop on National Education Policy 2020, at College of Engineering Osmanabad MH, on 30th May 2020.
Attended One-week Faculty Development Program on “Advanced Manufacturing Enterprise in Digital Era” at Aditya Institute of Technology and Management Tekkali - Srikakulam Dist. A.P, During 1 June to 5 June 2020.
Attended A One week, National Level Online Faculty Development Program on “Skill Development for Effective Research and Teaching-Learning Process” at Anil Neerukonda Institute of Technology and Sciences, Sangivalasa, Visakhapatnam, 531162, Andhra Pradesh. During 8 June to 12 June 2020.
Attended One Week Online Workshop on ‘NAAC Accreditation Process’ at Modern College of Arts, Science and Commerce, Shivajinagar, Pune-5. During 15th April 2021 to 22nd April 2021.
Attended Online National Level Workshop “Transformation through NAAC Assessment and Accreditation process, at Institute for Academic Excellence (IAE) Hyderabad. During 21st and 22nd June 2021.
Attended One Week FDP on "Writing Effective and Quality Research Papers, how to Publish in Scopus, SCI Listed and Reputed Journals” at Guru Ghasidas Vishwavidyalaya (Central University) Bilaspur CG. During 21-29 January 2022.
Attended One Week International FDP on Qualitative and Quantitative and Mixed method of design, at Guru Ghasidas Vishwavidyalaya (Central University) Bilaspur CG, during, July 19 -27, 2022.
Attended Five-Day Online Faculty Development Programme “Communication Skills for Research Paper Writing and Professional Practices” at Guru Ghasidas Vishwavidyalaya (Central University) Bilaspur CG. During 4 December to 8 December 2022.
Attended Online Two Weeks International FDP on “Synopsis, Dissertation, Thesis Drafting and Publication process” at Eudoxia Research University- USA, Eudoxia Research Centre. India. During 6 December to 14 December 2022
Attended Two Weeks Online Entrepreneurship course, During 30 November 2022 to 13 December 2022.
Attended One Week International Online Workshop on "Research Methods and Methodology" During 17 -24 August 2023
Attended One-week faculty development program on "Recent Trends in the Development of Alternative Fuels Organized by Sustainable Energy & Environment Laboratory (SEEL), Energy Centre, MANIT Bhopal India. During 19 - 23 Feb 2024.
Organized One-week online Faculty Development Program (FDP) on "𝑨𝒅𝒗𝒂𝒏𝒄𝒆𝒅 𝒂𝒏𝒅 𝑺𝒖𝒔𝒕𝒂𝒊𝒏𝒂𝒃𝒍𝒆 𝑴𝒂𝒏𝒖𝒇𝒂𝒄𝒕𝒖𝒓𝒊𝒏𝒈 𝑻𝒆𝒄𝒉𝒏𝒐𝒍𝒐𝒈𝒚" at OPJU Raigarh, During 6 -10 January, 2025
Attended One week AICTE Training and Learning (ATAL) Academy Faculty Development Program on "𝐂𝐮𝐬𝐭𝐨𝐦𝐢𝐬𝐞𝐝 𝐏𝐫𝐨𝐝𝐮𝐜𝐭 𝐌𝐚𝐧𝐮𝐟𝐚𝐜𝐭𝐮𝐫𝐢𝐧𝐠 𝐨𝐧 𝐀𝐝𝐯𝐚𝐧𝐜𝐞𝐝 𝐂𝐍𝐂 𝐌𝐚𝐜𝐡𝐢𝐧𝐞𝐬" at Central Institute of Petrochemicals Engineering and Technology (CIPET) Korba, CG. During 13 -18 January 2025
Attended ISTE Approved One Week STTP "Advances in Manufacturing in The Context of Industry 4.0” at St. John College of Engineering and Management, Palghar, Maharashtra. During 03 -07 Feb 2025
Attended One week AICTE Training and Learning (ATAL) Academy Faculty Development Program on "Role of Robotics and AI for Industry 4.0" at OPJU Raigarh, During 4-9 August 2025.
Attended One week AICTE Training and Learning (ATAL) Academy Faculty Development Program on " “Smart Manufacturing Technologies aligned with Industry 4.0: Challenges and Opportunities” at G. H. Raisoni University, Amravati, Maharashtra. During 8-13 September 2025.
Membership of Professional bodies
Life Member of Indian Society for Technical Education –LM 52477
Life Member of International Association of Engineers – LM 273343
Guest Lectures
Delivered an expert talk on Wind Energy Turbine Generator at Central Institute of Plastic and Engineering and Technology Bhubaneswar Odessa India on 06/06/2010 for diploma level students.
Delivered a Guest lecture on Metrology and Inspections at Jindal Steel and Power Ltd. Raigarh Chhattisgarh India on 19/09/2014 for Diploma and BE Level working professionals.
Delivered a Guest lecture on Casting and Metal Joining Processes at Jindal Steel and Power Ltd. Raigarh Chhattisgarh India on 20/09/2014 for Diploma and BE Level working professionals.
Delivered a Guest lecture on Casting and Metal Joining Processes at Jindal Steel and Power Ltd. Raigarh Chhattisgarh India on 08/07/2016 for Diploma and BE Level working professionals.
Delivered a Guest lecture on Metrology and Inspections at Jindal Steel and Power Ltd. Raigarh Chhattisgarh India on 07/07/2016 for Diploma and BE Level working professionals.
Delivered a Guest lecture on Metrology and Inspections at Jindal Steel and Power Ltd. Raigarh Chhattisgarh India on 18/05/2018 for Diploma and BE Level working professionals.
Delivered a Guest lecture on Casting and Metal Joining Processes at Jindal Steel and Power Ltd. Raigarh Chhattisgarh India on 19/05/2018 for Diploma and BE Level working professionals.
Delivered a Guest lecture on Career after Diploma, at Kirodimal Government Polytechnic Raigarh Chhattisgarh on 23/05/2022 for Diploma Students.
Delivered a Guest lecture on Personality Development and Opportunities for Campus placement at Government Polytechnic Korba Chhattisgarh on 24/05/2022 for Diploma Students.
Delivered a Guest lecture on How to Face Interview at Government Polytechnic Rengali, Sambalpur Odisha on 08/05/2023 for Diploma Students.
Delivered an expert talk on " Single Minute Exchange of Die (SMED) – A Lean Manufacturing Tool” at Department of Industrial and Production Engineering, Guru Ghasidas Central Vishwavidyalaya Bilaspur CG on 14.06.2023 for B.Tech, M.Tech & Ph.D.Level Faculty members
Delivered an Expert talk on "Higher Education - Opportunities & Challenges" at OP Jindal Community College Angul Odisha, on 30/06/2023, for ITI & Diploma Students.
Delivered an Expert talk on “Introduction to Additive Manufacturing” at Govt. ITI Kharsia, Raigarh CG on 20/08/2025 for ITI & Diploma Students.
Books
Productivity Enhancement by Reducing Setup Time", ISBN: 978-3-659-16294-7
Industry Sponsor Projects:
Title of the Project: Productivity Improvement by Reducing the Section Change Time in the Rolling Mill at Nalwa Steel & Power Limited (NSPL), Raigarh,Role: Principal Investigator. Total Cost of the Project: Rs 60,000,Status: Completed
