Ph.D. in Metallurgical and Materials Engineering, National Institute of Technology, Rourkela, India – 2022. (Thesis title: A Comprehensive Study on the Microstructure, Texture and Mechanical Properties of Mg and its Alloys during Grain Growth).
M.Tech in Metallurgical and Materials Engineering, National Institute of Technology, Rourkela, India – 2016. (Thesis title: Development of Aluminium based Metal Matrix Nanocomposites by Powder Metallurgy Route).
B.Tech in Metallurgical and Materials Engineering, Indira Gandhi Institute of Technology, Sarang, Odisha – 2013. (Thesis title: Synthesis and Characterization of Al-SiC Composites by Stir Casting).
Kumar, L., Shrivastava, P., Panda, D., Ghosh, A., and Alam, S. N. (2022). “Study of Tribological Behavior and Wear Mechanism of Nanocomposite Coatings.” Chapter 09, Tribology and Characterization of Surface Coatings, John Wiley & Sons, Inc., ISBN: 9781119818878.
Jadam, T., Panda, D., Chatterjee, S., Datta, S., Sahoo, S. K., and Mishra, S. C. (2021). “Performance of microwave-irradiated WC-Co insert during dry machining of Inconel 718 superalloys.” Chapter 06, Sustainable Manufacturing and Design, Woodhead Publishing, ISBN: 978-0-12-822124-2.
A. Kumari, A. Kumar, R. Dawn, J. Roy, S. Jena, R. Vinjamuri, D. Panda, S. K. Sahoo, and V. R. Singh, Effect of Annealing Temperature on the Structural, Electronic and Magnetic Properties of Co doped TiO2 Nanoparticles: An Investigation by Synchrotron-Based Experimental Techniques, J. Alloys Compd. 933 (2023), p. 167739.
NK Singh, A Kumar, R Dawn, S Jena, A Kumari, VR Singh, M Zzaman, R Shahid, D Panda, SK Sahoo, UK Goutam, VK Verma, K Kumar, M Khatravath, A Priyamt, Resonance Photoemission Spectroscopic Study of Thermally Evaporated NiTiO3 Thin Films, J. Electron. Mater., 52 (2023) pp. 669–678.
A. Singh, R. Dawn, V. K. Verma, D. Panda, S. K. Sahoo, K. Kumar, and V.R. Singh, Electronic and magnetic properties of FeCr2O4 nanoparticles by advanced synchrotron based soft X-ray magnetic circular dichroism, Physica B: Condensed Matter, 647 (2022), 414373.
D. Panda, R. Kushwaha, R. K. Sabat, S. Suwas, & S. K. Sahoo, Microstructure and texture evolution during grain growth of AM30 magnesium alloy. Philosophical Magazine, 102 (2022), pp.2207-2233.
N. Sahu, D. Panda, S. K. Badjena, and S. K. Sahoo, Multicomponent flux for improved penetration and metallurgical properties using A-GTAW, Journal of Materials Engineering and Performance, (2022), DOI: 10.1007/s11665-022-07383-2.
D. Panda, S. Tripathy, R. K. Sabat, S. Suwas, & S. K. Sahoo, An investigation on the correlation between microstructure, texture and mechanical properties of Mg and its alloys, Journal of Materials Engineering and Performance, DOI: 10.1007/s11665-022-06934-x.
D. Panda, R. K. Sabat, S. Suwas, & S. K. Sahoo, Role of temperature and precipitates on the evolution of microstructure and texture during grain growth of Mg–3Al–0.2Ce alloy, Philosophical Magazine, 102 (2022), pp.1091-1120.
S. N. Alam, P. Shrivastava, D. Panda, B. Gunale, K. Susmitha, and P. Pola, Synthesis of Al2Cu Intermetallic Compound by Mechanical Alloying. Materials Today Communications, 31 (2022), 103267.
P. Shrivastava, S. N. Alam, D. Panda, S. K. Sahoo, T. Maity, and K. Biswas, Development and mechanical properties investigation of Cu-MWCNT-graphite Nanoplatelets hybrid Nanocomposites. Diamond and Related Materials, 117 (2021), 108467.
P. Shrivastava, S. N. Alam, D. Panda, S. K. Sahoo, T. Maity, and K. Biswas, Effect of addition of multiwalled carbon nanotube/graphite nanoplatelets hybrid on the mechanical properties of aluminium. Diamond and Related Materials, 104 (2021), 107715.
D. Panda, R. K. Sabat, S. Suwas, V. D. Hiwarkar, and S. K. Sahoo, Texture weakening in pure magnesium during grain growth. Philosophical Magazine, 99 (2019), pp.1362-1385.
S. N. Alam, N. Sharma, D. Panda, A. Kumar, D. Sampenga, A. Sairam, V. Sarky, and M.B. Krupateja, Mechanical milling of Al and synthesis of in-situ Al2O3 particles by mechanical alloying of Al-CuO system. Journal of Alloys and Compounds, 753 (2018), pp. 799-812.
R. K. Sabat, D. Panda, and S. K. Sahoo, Growth mechanism of extension twin variants during annealing of pure magnesium: An ‘ex situ’ electron backscattered diffraction investigation. Materials Characterization, 126 (2017), pp. 10-16.
R. K. Sabat, S. K. Sahoo, D. Panda, U. K. Mohanty, and S. Suwas, Orientation dependent recrystallization mechanism during static annealing of pure magnesium. Materials Characterization, 132 (2017), pp. 388-396.
D. Panda, P. Bhuyan, L Kumar, and S. N. Alam, Synthesis of Al Intermetallic Compound by Mechanical Alloying. AJSE, 42 (2017), pp. 4427-4437.
L. Kumar, S. N. Alam, S. Sahoo, D. Panda. Synthesis of TiB2 Nanocomposites by Powder Metallurgy Route. Materials Today: Proceedings, 4 (2017), pp. 9883-9887.
Pallabi Bhuyan, Syed Nasimul Alam, D. Panda, Lailesh Kumar, Harshpreet Singh. Synthesis and Characterization of Cu-Fe3Al Composites Using Powder Metallurgy Route. Materials Today: Proceedings, 4 (2017), pp. 213-223.
Pallabi Bhuyan, Harshpreet Singh, Lailesh Kumar, Nidhi Sharma, D. Panda, Deepanshu Verma, Syed Nasmul Alam. Development of Cu-E-Glass Fiber Composites by Powder Metallurgy Route. IOP Conference Series: Materials Science and Engineering, 115 (2016), p. 012023.
D. Panda, Lailesh Kumar and Syed Nasimul Alam. Development of Al-Fe3Al Nanocomposite by Powder Metallurgy Route. Materials Today: Proceedings, 2(4-5) (2015), pp. 3565 – 3574.
Evolution of microstructure and texture in pure Magnesium during static annealing, poster presented on 13th – 16th Nov, NMD-ATM 2019, Trivandrum, India.
Development of recrystallization texture in pure Magnesium during static annealing, poster presented on 11th – 14th Nov, NMD-ATM 2017, Goa, India.
Development of Al-Fe3Al Nanocomposite by Powder Metallurgy Route, 13 – 15th Mar, ICMPC 2015, GRIET Hyderabad.
Short term course/workshop on "Mechanical Behavior of Materials" conducted by the Department of Materials Science and Engineering, IIT Kanpur, 30th Oct – 3rd Nov 2018.
SERB School on “Crystallographic Texture” organized by Department of Metallurgical Engineering and Materials Science, IIT Bombay, 3rd – 7th October 2017.
Crystallography and Texture, organized by Department of Metallurgy and Materials Engineering, IIEST Shibpur, 10th – 12th November 2016.
