Faculty Profile

Dr. Trinath Talapaneni

Sr. Assistant Professor

Department of Metallurgical and Materials Engineering

School of Engineering


  •  Ph.D. in Process Metallurgy from National Institute of Technology, Rourkela - 2019.(Thesis Title: Physicochemical Properties of CaO-MgO-SiO2-Al2O3 Synthetic Slag)
  •   M.Tech in Process Metallurgy from National Institute of Technology, Surathkal – 2012.(Thesis Title: Recovery of Cu and Zn from Complex Sulphide Ores)
  •  B. Tech in Metallurgical and Materials Technology from Mahatma Gandhi Institute of Technology, Hyderabad - 2010.
  •  OP Jindal University, Raigarh (C.G), Working as a Assistant Professor from July 2018 to till date.
  •  Worked as an Assistant Professor in National Institute of Technology,Bhopal from July 2017 to July 2018.
  •   Worked as a Teaching Assistant in National Institute of Technology, Rourkela from Jan 2013 to June 2017.
  •   Worked as an Assistant Professor in Institute of Aeronautical Engineering, Hyderabad from Jan 2012 to Jan 2013.
  •  Process Metallurgy.
  •  Metallurgical Waste Management
  •   Modeling and Simulation
  •  Dr Trinath Talapaneni, Dr Vatsala Chaturvedi, “Proposing A Suitable Slag Composition by Estimating the Fusion Behavior, Viscosity and Desulphurization Ability for Blast Furnaces Running with High Alumina” MaterialsToday proceedings, 2022.
  •  Vatsala Chaturvedi, Trinath Talapaneni. Effect of Mechanical Vibration and Grain Refiner on Microstructure and Mechanical Properties of AZ91Mg Alloy during Solidification. Journal of Materials Engineering and Performance, vol. 30, pp.3187-3202, 2021.
  •  Trinath Talapaneni, Natraj Yedla, and Smarajit Sarkar. Study on desulphurization capacity of high alumina blast furnace slags at 1773 K using slag-metal equilibrium technique. Metallurgical Research & Technology, Vol. 115, no. 502, pp. 1-8, 2018.
  •  Trinath Talapaneni, Natraj Yedla, Snehanshu Pal and Smarajit Sarkar. Experimental and theoretical studies on the viscosity-structure correlation for high alumina silicate melts. Metallurgical and Materials Transactions B, vol. 48B, no. 3, pp. 1450-1462, March 2017.
  •  Trinath Talapaneni, Natraj Yedla, Smarajit Sarkar and Snehanshu Pal. Effect of basicity, Al2O3, MgO content on the softening and melting properties of the CaO-MgO-SiO2-Al2O3 high alumina quaternary slag system. Metallurgical Research & Technology, vol. 113, pp. 501-511, March 2016.
  •  Dr. Vatsala Chaturvedi, Dr. Trinath Talapaneni, “An overview on the microstructure and mechanical properties of vibrated Mg alloy during solidification”, International Conference on Smart Technologies for Energy, Environment & Sustainable Development (ICSTEESD-20) organized by GH Raisoni College of Engineering, Nagpur on Dec 4-5, 2020.
  •  Delivered a talk on “Physicochemical properties of high alumina slags” in the conference on Utilization of steel plant slag- Organized by JSPL, Raigarh in Jindal Center on 23-24th Nov-2018.
  •  T. Talapaneni, S. Sarkar, N. Yedla, PLN Reddy “Recovery of Cu and Zn from complex sulphide ores” NCPCM-2015, organized by Department of Metallurgical and Materials Engineering, NIT Rourkela.
  •  A.Lava kumar, P.K.Singh, P.K.Katiyar, T.Trinath and A.K.Jaiswal, “Archaeometallurgical Studies of Ancient Sword” (oral presentation at NMD ATM 2014, 12th – 15th November 2014, College of Engineering, Pune).
  •  Participated in an oral session in NMD-ATM 2014 held at Pune (India) on November-2014.
  •  Kanhed, Satish Mohanrao; Talapaneni, Trinath; Chakrabarti, Siddharth Sudhansu "A Device for Utilization of Microwave for Agglomeration of Fines by Sintering Route in Steel Plants" Patent Application No. 201921038156, published on 5 Aug, 2022.
  •  Organized (As a convener) a Five Day Online Faculty Development Program (FDP) on “Recent Advances in Process Metallurgy” from 13-17 July, 2020, at OP Jindal University, Raigarh, Chhattisgarh.
  •  Organized a webinar on “New Developments in Oxygen Steel Making” on June 4, 2020 at OPJU.
  •  Organized a webinar on “Alternative Routes of Iron Making with Lower Carbon Footprints” on May 16, 2020.
  •  Organized a Two Day Webinar on “Industrial Aspects of Heat Treatment of Steels” on May 1st & 2nd 2020.
  •   Organized workshop on “Fatigue and its Crack Prediction” on 22 Nov 2019 at OPJU.
  •  Attended workshop on “Application of Machine Learning in Materials Science using Python” organized by Department of Metallurgical Engineering, IIT (BHU) on 26 June 2021.
  •  Attended TEQIP-III Sponsored Five Day online workshop on “Aspects of Ladle and Tundish Metallurgy (ALTM-21)” organized by Department of Metallurgical and Materials Engineering, VNIT-Nagpur from 1-5th March 2021.
  •  Attended a Five- Day Faculty Development Programme entitled “Transport Phenomena in Industrial Processes” (9-13th Nov-2020), organized by Department of Metallurgical & Materials Engineering, IGIT- Sarang, Odisha.
  •  Attended an International Webinar on 'Global Steel Industry Sustainability (GSIS-2020)' 2nd August, 2020, organized by Department of Metallurgical and Material Engineering, NIT- Durgapur.
  •   Attended a Three-day webinar on "Secondary Melting and Processing Technologies” from 23-25 July, 2020 organized by Department of Metallurgical and Materials Engineering, MGIT, Hyderabad.
  •  Attended a Webinar series on “Role of Intellectual Property in Creating Innovation Ecosystem for Growth” (6-10th June 2020), organized by Gangadhar Meher University, Amruta Vihar, Sambalpur, Odisha, India.
  •  Attended an 1st one-week International Faculty Development Programme on “Research and Development in Materials Behavior, Processing and Characterization Techniques” from June 9-14, 2020, organized by Punjab University, Chandigarh.
  •  Attended a one week FDP on “Advances in Materials for Engineering Applications” from 6-10th June 2020, organized by Vignan Institute of Engineering for women.
  •  Attended a Webinar on “Insights to Industry4.0” on 29th May 2020, Organized by department of Mechanical Engineering, S.A Engineering college, Chennai.
  •   Attended a FDP on “Recent Advances in Material Characterization” from 23-28 May 2020, Organized by Mechanical Engineering department, NITTTR Chandigarh.
  •  Attended a webinar on “3D Printing in Biomedical Field for Ongoing Pandemic Situation” organized by Hyderabad Institute of Technology & Management (HITAM) on 20/5/2020.
  •  Attended a short term course on “Experimental Techniques in Iron and Steel Making (ETIS-2019)”, December 10-13, 2019 at NML Jamshedpur.
  •  Attended a short term course on “Deformation Behavior and Fracture of Engineering Materials: Experimental and Simulations”, December 10-14, 2018 at NIT Rourkela.
  •  Participated in a three-day workshop on “Experimental techniques in extractive metallurgy (ETEM-2016)” held at IIT (BHU) on 10th July 2016.
  •   Participated in short term training program on “Design of experiments: An optimization tool (DOEOT-2014)” held at NIT Rourkela on 22-25 December 2014.
  •   American Society for Metals (ASM International)
  •  Delivered a Talk on “How to File a Patent” at OP Jindal University, Raigarh on 29 January, 2021.
  •  Delivered a 6-day talk on “Basics of Iron and Steel Metallurgy” during a 12-day corporate training program for GET’S held at JSPL from 7 Oct 2020 to 20 Oct 2020.
  •  Delivered a talk on “Direct Reduction of Iron process” during a corporate training program for VP and above category at JSPL on 18 July 2019.
  •  Received Scholarship from MHRD during Ph.D. from 2013-2017.
Digital Initiatives :                                                        
Admission Open 2024 - 25